GSP
Quick Navigator

Search Site

Unix VPS
A - Starter
B - Basic
C - Preferred
D - Commercial
MPS - Dedicated
Previous VPSs
* Sign Up! *

Support
Contact Us
Online Help
Handbooks
Domain Status
Man Pages

FAQ
Virtual Servers
Pricing
Billing
Technical

Network
Facilities
Connectivity
Topology Map

Miscellaneous
Server Agreement
Year 2038
Credits
 

USA Flag

 

 

Man Pages
METASYS(8) NUT Manual METASYS(8)

metasys - Driver for Meta System UPS equipment

This man page only documents the hardware-specific features of the metasys driver. For information about the core driver, see nutupsdrv(8).

The metasys driver was written with the "Meta System UPS Protocol Rev.1.12" kindly supplied from Meta System.
The driver should support all the common features of the ups models:
•HF Line (/2) 1-8 boards
•HF Millennium (810, 820)
•HF TOP Line (910, 920, 930, 940, 950, 970, 980)
•ECO Network (750, 1000, 1050, 1500, 1800, 2000, 2100, 2500, 3000)
•ECO (305, 308, 311, 511, 516, 519, 522, SX, SXI)
•ally HF (800, 1000, 1250, 1600, 2000, 2500)
•Megaline (1250, 2500, 3750, 5000, 6250, 7500, 8750, 10000)

The needed cable is a standard pin-to-pin serial cable with at least pins 2, 3, and 5 (on DB9 connector) connected.

This driver supports no extra arguments from ups.conf(5).

This driver has been tested on Meta System HF Millennium 820 and ally HF 1000 only.
Any information about the use of the driver with the other listed UPS are really welcome.

Fabio Di Niro <blaxwan@users.sourceforge.net>

nutupsdrv(8)

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
12/29/2015 Network UPS Tools 2.7.3.

Search for    or go to Top of page |  Section 8 |  Main Index

Powered by GSP Visit the GSP FreeBSD Man Page Interface.
Output converted with ManDoc.