GSP
Quick Navigator

Search Site

Unix VPS
A - Starter
B - Basic
C - Preferred
D - Commercial
MPS - Dedicated
Previous VPSs
* Sign Up! *

Support
Contact Us
Online Help
Handbooks
Domain Status
Man Pages

FAQ
Virtual Servers
Pricing
Billing
Technical

Network
Facilities
Connectivity
Topology Map

Miscellaneous
Server Agreement
Year 2038
Credits
 

USA Flag

 

 

Man Pages
RADVD(8) RADVD(8)

radvd - router advertisement daemon for IPv6

radvd [ -hsvc ] [ -d debuglevel ] [ -C configfile ] [ -p pidfile ] [ -m logmethod ] [ -l logfile ] [ -n nodaemon ] [ -f facility ] [ -t chrootdir ] [ -u username ]

radvd is the router advertisement daemon for IPv6. It listens to router solicitations and sends router advertisements as described in "Neighbor Discovery for IP Version 6 (IPv6)" (RFC 4861). With these advertisements hosts can automatically configure their addresses and some other parameters. It also defines "Neighbor Discovery Optimization for IPv6 over Low-Power Wireless Personal Area Networks (6LoWPANs)" (RFC6775). They also can choose a default router based on these advertisements.

The configuration file must not be writable by others, and if non-root operation is requested, not even by self/own group.

For every one character option there is also a long option, which is listed right next to the "short" option name:

-v, --version
Displays the version of radvd and then aborts.
-h, --help
Displays a short usage description and then aborts.
-c, --configtest
Test configuration and do startup tests and then exit.
-n, --nodaemon
Prevent the daemonizing.
-d debuglevel, --debug debuglevel
With this option you turn on debugging information. The debugging level is an integer in the range from 1 to 5, from quiet to very verbose. A debugging level of 0 completely turns off debugging. If a debugging level greater than 0 is used, radvd doesn't background itself on start. The default debugging level is 0.
-C configfile, --config configfile
Specifies an alternate config file. Normally the compiled in default /usr/local/etc/radvd.conf is used.
-p pidfile, --pidfile pidfile
Specifies an alternate pidfile. Normally the compiled in default /var/run/radvd.pid is used.
-m method, --logmethod method
Specifies the logging method to use. Possibly values are:
none
Completely disables any logging.
logfile
Logs to the logfile which is specified by the -l option. If no logfile is specified on the command line, then a compiled in default is used (see next option).
stderr
Logs to standard error.
stderr_syslog
Logs only the high messages (of at least LOG_ERR priority) to standard error, and everything to syslog (default method).
syslog
Logs to syslog.
-l logfile, --logfile logfile
Specifies the logfile to use when using the logging method logfile. The default logfile is /var/log/radvd.log.
-f facility, --facility facility
Specifies the facility (as an integer) when using syslog logging. Default is LOG_DAEMON.
-t chrootdir, --chrootdir chrootdir
If specified, switches to chrootdir before doing anything else. This directory and its subdirectories must have been populated first. For security reasons, -u must always be used when using chrootdir.

Note that on Linux radvd requires access to the /proc filesystem, so it is more challenging to set up the chroot environment.

-u username, --username username
If specified, drops root privileges and changes user ID to username and group ID to the primary group of username. This is recommended for security reasons. You might also need to use -p to point to a file in a username -writable directory (e.g. /var/run/radvd/radvd.pid).

/usr/local/sbin/radvd
/usr/local/etc/radvd.conf
/var/run/radvd.pid
/var/log/radvd.log

There certainly are some bugs. If you find them or have other suggestions please contact Reuben Hawkins <reubenhwk@gmail.com>.

radvd.conf(5), radvdump(8)

Pedro Roque	<roque@di.fc.ul.pt>	- wrote first version for Linux
Lars Fenneberg	<lf@elemental.net>	- previous maintainer
Nathan Lutchansky	<lutchann@litech.org>	- previous maintainer
Pekka Savola   <pekkas@netcore.fi>     - previous maintainer
Craig Metz	<cmetz@inner.net>	- port to NRL's IPv6 code for BSD4.4
Marko Myllynen	<myllynen@lut.fi>	- RFC 2461 update, Mobile IPv6 support
Jim Paris	<jim@jtan.com>		- Privilege separation support
Reuben Hawkins  <reubenhwk@gmail.com>   - current maintainer
Pierre Ossman   <pierre@ossman.eu>      - RFC6106 (DNSSL) support
Varka Bhadram 	<varkabhadram@gmail.com> - 6LoWPAN-ND (RFC6775) support
Robin H. Johnson	<robbat2@gentoo.org>	- RA splitting per RFC 6980 & RFC4861#6.2.3
14 Dec 2010 radvd 2.19

Search for    or go to Top of page |  Section 8 |  Main Index

Powered by GSP Visit the GSP FreeBSD Man Page Interface.
Output converted with ManDoc.