NAME

SYNOPSIS

DESCRIPTION

FILE OWNERSHIP

-u, --force-user, -o force-user=...

Makes all files owned by the specified user. Also causes chown on the mounted filesystem to always fail.

-g, --force-group=group, -o force-group=...

Makes all files owned by the specified group. Also causes chgrp on the mounted filesystem to always fail.

-p, --perms=permissions, -o perms=...

Takes a comma- or colon-separated list of chmod-like permission specifications to be applied to the permission bits in order. See PERMISSION SPECIFICATION below for details.

This only affects how the permission bits of existing files are altered when shown in the mounted directory. You can use --create-with-perms to change the permissions that newly created files get in the source directory.

Note that, as usual, the root user isn't bound by the permissions set here. You can get a truly read-only mount by using -r.

-m, --mirror=user1:user2:..., -o mirror=...

Takes a comma- or colon-separated list of users who will see themselves as the owners of all files. Users who are not listed here will still be able to access the mount if the permissions otherwise allow them to.

You can also give a group name prefixed with an '@' to mirror all members of a group. This will not change which group the files are shown to have.

-M, --mirror-only=user1:user2:..., -o mirror-only=...

Like --mirror but disallows access for all other users (except root).

--map=user1/user2:@group1/@group2:..., -o map=...

Given a mapping user1/user2, all files owned by user1 are shown as owned by user2. When user2 creates files, they are chowned to user1 in the underlying directory. When files are chowned to user2, they are chowned to user1 in the underlying directory. Works similarly for groups.

A single user or group may appear no more than once on the left and once on the right of a slash in the list of mappings. Currently, the options --force-user, --force-group, --mirror, --create-for-*, --chown-* and --chgrp-* override the corresponding behavior of this option.

Requires mounting as root.

--map-passwd=<passwdfile>, -o map-passwd=<passwdfile>

--map-group=<groupfile>, -o map-group=<groupfile>

Like --map=..., but reads the UID/GID mapping from passwd and group files (like /etc/passwd and /etc/group). Helpful to restore system backups where UIDs/GIDs differ.

Example usage:

bindfs --map-passwd=/mnt/orig/etc/passwd \
--map-passwd=/mnt/orig/etc/group \
/mnt/orig /mnt/mapped

Requires mounting as root.

--uid-offset=..., -o uid-offset=...

Works like --map, but adds the given number to all file owner user IDs. For instance, --uid-offset=100000 causes a file owned by user 123 to be shown as owned by user 100123.

For now, this option cannot be used together with --map. Please file an issue with the desired semantics if you have a case for using them together.

Requires mounting as root.

--gid-offset=..., -o gid-offset=...

Works exactly like --uid-offset but for groups.

FILE CREATION POLICY

--create-as-user, -o create-as-user

Tries to change the owner and group of new files and directories to the uid and gid of the caller. This can work only if the mounter is root. It is also the default behavior (mimicing mount --bind) if the mounter is root.

--create-as-mounter, -o create-as-mounter

All new files and directories will be owned by the mounter. This is the default behavior for non-root mounters.

--create-for-user=user, -o create-for-user=...

Tries to change the owner of new files and directories to the user specified here. This can work only if the mounter is root. This option overrides the --create-as-user and --create-as-mounter options.

--create-for-group=group, -o create-for-group=...

Tries to change the owning group of new files and directories to the group specified here. This can work only if the mounter is root. This option overrides the --create-as-user and --create-as-mounter options.

--create-with-perms=permissions, -o create-with-perms=...

Works like --perms but is applied to the permission bits of new files get in the source directory. Normally the permissions of new files depend on the creating process's preferences and umask. This option can be used to modify those permissions or override them completely. See PERMISSION SPECIFICATION below for details.

CHOWN/CHGRP POLICY

--chown-normal, -o chown-normal

Tries to chown the underlying file. This is the default.

--chown-ignore, -o chown-ignore

Lets chown succeed (if the user has enough mirrored permissions) but actually does nothing. A combined chown/chgrp is effectively turned into a chgrp-only request.

--chown-deny, -o chown-deny

Makes chown always fail with a 'permission denied' error. A combined chown/chgrp request will fail as well.

--chgrp-normal, -o chgrp-normal

Tries to chgrp the underlying file. This is the default.

--chgrp-ignore, -o chgrp-ignore

Lets chgrp succeed (if the user has enough mirrored permissions) but actually does nothing. A combined chown/chgrp is effectively turned into a chown-only request.

--chgrp-deny, -o chgrp-deny

Makes chgrp always fail with a 'permission denied' error. A combined chown/chgrp request will fail as well.

CHMOD POLICY

--chmod-normal, -o chmod-normal

Tries to chmod the underlying file. This will succeed if the user has the appropriate mirrored permissions to chmod the mirrored file AND the mounter has enough permissions to chmod the real file. This is the default (in order to behave like mount --bind by default).

--chmod-ignore, -o chmod-ignore

Lets chmod succeed (if the user has enough mirrored permissions) but actually does nothing.

--chmod-deny, -o chmod-deny

Makes chmod always fail with a 'permission denied' error.

--chmod-filter=permissions, -o chmod-filter=...

Changes the permission bits of a chmod request before it is applied to the original file. Accepts the same permission syntax as --perms. See PERMISSION SPECIFICATION below for details.

--chmod-allow-x, -o chmod-allow-x

Allows setting and clearing the executable attribute on files (but not directories). When used with --chmod-ignore, chmods will only affect execute bits on files and changes to other bits are discarded. With --chmod-deny, all chmods that would change any bits except excecute bits on files will still fail with a 'permission denied'. This option does nothing with --chmod-normal.

XATTR POLICY

--xattr-none, -o xattr-none

Disable extended attributes altogether. All operations will return 'Operation not supported'.

--xattr-ro, -o xattr-ro

Let extended attributes be read-only.

--xattr-rw, -o xattr-rw

Let extended attributes be read-write (the default). The read/write permissions are checked against the (possibly modified) file permissions inside the mount.

OTHER FILE OPERATIONS

--delete-deny, -o delete-deny

Makes all file delete operations fail with a 'permission denied'. By default, files can still be modified if they have write permission, and renamed if the directory has write permission.

--rename-deny, -o rename-deny

Makes all file rename/move operations within the mountpoint fail with a 'permission denied'. Programs that move files out of a mountpoint do so by copying and deleting the original.

RATE LIMITS

Currently, the implementation is not entirely fair. See BUGS below.

--read-rate=N, -o read-rate=N

Allow at most N bytes per second to be read. N may have one of the following (1024-based) suffixes: k, M, G, T.

--write-rate=N, -o write-rate=N

Same as above, but for writes.

LINK HANDLING

--hide-hard-links, -o hide-hard-links

Shows the hard link count of all files as 1.

--resolve-symlinks, -o resolve-symlinks

Transparently resolves symbolic links. Disables creation of new symbolic links.

With the following exceptions, operations will operate directly on the target file instead of the symlink. Renaming/moving a resolved symlink (inside the same mount point) will move the symlink instead of the underlying file. Deleting a resolved symlink will delete the underlying symlink but not the destination file. This can be configured with --resolved-symlink-deletion.

Note that when some programs, such as vim, save files, they actually move the old file out of the way, create a new file in its place, and finally delete the old file. Doing these operations on a resolved symlink will replace it with a regular file.

Symlinks pointing outside the source directory are supported with the following exception: accessing the mountpoint recursively through a resolved symlink is not supported and will return an error. This is because a FUSE filesystem cannot reliably call itself recursively without deadlocking, especially in single-threaded mode.

--resolved-symlink-deletion=policy, -o resolved-symlink-deletion=policy

If --resolve-symlinks is enabled, decides what happens when a resolved symlink is deleted. The options are: deny (resolved symlinks cannot be deleted), symlink-only (the underlying symlink is deleted, its target is not), symlink-first (the symlink is deleted, and if that succeeds, the target is deleted but no error is reported if that fails) or target-first (the target is deleted first, and the symlink is deleted only if deleting the target succeeded). The default is symlink-only.

Note that deleting files inside symlinked directories is always possible with all settings, including deny, unless something else protects those files.

MISCELLANEOUS OPTIONS

-h, --help

Displays a help message and exits.

-V, --version

Displays version information and exits.

--fuse-version Displays the version of the FUSE library interface that was seen at compile-time, as well as the version that bindfs currently runs with.

--no-allow-other, -o no-allow-other

Does not add -o allow_other to FUSE options. This causes the mount to be accessible only by the current user.

(The deprecated shorthand -n is also still accepted.)

--realistic-permissions, -o realistic-permissions

Hides read/write/execute permissions for a mirrored file when the mounter doesn't have read/write/execute access to the underlying file. Useless when mounting as root, since root will always have full access.

(Prior to version 1.10 this option was the default behavior. I felt it violated the principle of least surprise badly enough to warrant a small break in backwards-compatibility.)

--ctime-from-mtime, -o ctime-from-mtime

Recall that a unix file has three standard timestamps: atime (last access i.e. read time), mtime (last content modification time) ctime (last content or metadata (inode) change time)

With this option, the ctime of each file and directory is read from its mtime. In other words, only content modifications (as opposed to metadata changes) will be reflected in a mirrored file's ctime. The underlying file's ctime will still be updated normally.

--enable-lock-forwarding, -o enable-lock-forwarding

Forwards flock and fcntl locking requests to the source directory. This way, locking a file in the bindfs mount will also lock the file in the source directory.

This option must be used with --multithreaded because otherwise bindfs will deadlock as soon as there is lock contention. However, see BUGS below for caveats about --multithreaded with the current implementation.

--disable-lock-forwarding, -o disable-lock-forwarding

Currently does nothing, but a future release may default to enabling lock forwarding. If you depend on this behaviour, it's recommended to set this flag explicitly.

--enable-ioctl, -o enable-ioctl

Enables forwarding of ioctl, which is needed for some advanced features such as append-only files (chattr +a). Note that the ioctl action will be performed as the mounter, not the calling user. No efforts are made to check whether the calling user would ordinarily have the permissions to make the ioctl. This may be a security concern, especially when mounting as root.

--block-devices-as-files, -o block-devices-as-files

Shows block devices as regular files.

--multithreaded, -o multithreaded

Run bindfs in multithreaded mode. While bindfs is designed to be otherwise thread-safe, there is currently a race condition that may pose a security risk for some use cases. See BUGS below.

--forward-odirect=alignment, -o forward-odirect=alignment

Enable experimental O_DIRECT forwarding, with all read/write requests rounded to the given alignment (in bytes). By default, the O_DIRECT flag is not forwarded to the underlying FS. See open(2) for details about O_DIRECT.

Only works on Linux. Ignored on other platforms.

FUSE OPTIONS

-o options

Fuse options.

-r, -o ro

Make the mount strictly read-only. This even prevents root from writing to it. If this is all you need, then (since Linux 2.6.26) you can get a more efficent mount with mount --bind and then mount -o remount,ro.

-d, -o debug

Enable debug output (implies -f).

-f

Foreground operation.

PERMISSION SPECIFICATION

This program extends the chmod symbolic representation with the following operands:

`D' (right hand side) Works like X but applies only to directories (not to executables).

`d' and `f' (left hand side) Makes this directive only apply to directories (d) or files (f). e.g. gd-w would remove the group write bit from all directories.

`u', `g', `o' (right hand side) Uses the user (u), group (g) or others (o) permission bits of the original file. e.g. g=u would copy the user's permission bits to the group. ug+o would add the others' permissions to the owner and group.

Examples

o-rwx

Removes all permission bits from others.

g=rD

Allows group to read all files and enter all directories, but nothing else.

0644,a+X

Sets permission bits to 0644 and adds the execute bit for everyone to all directories and executables.

og-x:og+rD:u=rwX:g+rw

Removes execute bit for others and group, adds read and directory execute for others and group, sets user permissions to read, write and execute directory/executable, adds read and write for group.

EXAMPLES

bindfs -u www -g nogroup -p 0000,u=rD ~/mywebsite ~/public_html/mysite

Publishes a website in public_html so that only the 'www' user can read the site.

bindfs -M foo,bar,1007,@mygroup -p 0600,u+X dir mnt

Gives access to 'foo', 'bar', the user with the UID 1007 as well as everyone in the group 'mygroup'. Sets the permission bits to 0600, thus giving the specified users read/write access, and adds the user execute bit for directories and executables.

bindfs -ono-allow-other,perms=a-w somedir somedir

Makes a directory read-only and accessable only by the current user.

/home/bob/shared /var/www/shared/bob fuse.bindfs perms=0000:u+rD 0 0

An example /etc/fstab entry. Note that the colon must be used to separate arguments to perms, because the comma is an option separator in /etc/fstab.

bindfs#/home/bob/shared /var/www/shared/bob fuse perms=0000:u+rD 0 0

Older systems may require this deprecated fstab syntax.

NOTES

Access to device files is denied by default by FUSE as a security precaution. Use -o dev to enable access (requires mounting as root). This may not be supported on all operating systems.

MacFuse caches file contents by default. This means that changes in source files are not always immediately visible under the mount point. -o nolocalcaches can be used to disable the cache.

When using --mirror[-only] @somegroup, bindfs won't see changes to the group's member list. Sending bindfs a SIGUSR1 signal will make it reread the user database.

The following extra options may be useful under osxfuse: -o local,allow_other,extended_security,noappledouble See https://github.com/osxfuse/osxfuse/wiki/Mount-options for details.

BUGS

Rate limiting favors the process with the larger block size. If two processes compete for read/write access, the one whose read()/write() calls specify the larger block size gets to read/write faster. The total rate limit is maintained though, and clients with equal block sizes and a similar rate of requests are treated fairly as long as the kernel orders their requests fairly.

Some features relying on xattrs might not work properly on OS X (https://github.com/mpartel/bindfs/issues/21). For instance, Finder tags seem to work but comments might not.

Please report bugs and/or send pull requests to https://github.com/mpartel/bindfs/issues.

DEPRECATIONS

AUTHOR

SEE ALSO