Command line parameters

-c configfile

Use the XML configuration in configfile.

-h

Print a summary of available command line parameters with short descriptions and exit.

-n

Normalize metadata strings by removing excess whitespaces.

-q

Be more quiet. Suppress the output that external programs send to standard error.

-s [playlist]

Run ezstream as a line-based shuffling utility. If no playlist argument is given, a list of media file names is read from standard input instead of an input file. After successfully reading the entire list, it is shuffled and printed to standard output, and ezstream will exit.

-V

Print the ezstream version number and exit.

-v

Produce more verbose output from ezstream. Use twice for even more verbose output.

When the -q and -v parameters are provided simultaneously, an additional line of information about the currently streamed file — playlist position, approximate playing time and bit rate — is displayed.

Runtime control

SIGHUP

Rereads the playlist file after the track that is currently streamed. If the playlist is not to be shuffled, ezstream attempts to find the previously streamed file and continue with the one following it, or restarts from the beginning of the list otherwise.

SIGUSR1

Skips the currently playing track and moves on to the next in playlist mode, or restarts the current track when streaming a single file.

SIGUSR2

Triggers rereading of metadata for the stream by running the program or script specified in <metadata_progname/> (see below.) This is the only meaningful signal when streaming from standard input.

Root element

<ezstream />

(Mandatory.) The configuration file's root element. It contains all other configuration elements.

Global configuration elements

<url />

(Mandatory.) Specifies the location and mount point of the Icecast server, to which the stream will be sent. The content must be of the form http://server:port/mountpoint For example:

<url>http://example.com:8000/stream.ogg</url>

<sourceuser />

(Optional.) Sets the source username for authentication with the Icecast server. The default user (usually “source”) is used if this element is not provided.

<sourcepassword />

(Mandatory.) Sets the source password for authentication with the Icecast server.

<format />

(Mandatory.) This element has two different meanings, depending on whether re-encoding is enabled or not. It specifies the output format of the stream if re-encoding is enabled. Otherwise, it specifies the input format of all input files. Recognized and supported values for output stream formats are VORBIS, MP3 and THEORA. Other values will be ignored and cause ezstream to simply pass through the data, which may or may not work.

<filename />

(Mandatory.) Set the path and name of a single media file, a playlist, the name of an external program (see below), or the keyword stdin for streaming from standard input. Playlists are recognized by their filename extension and end with either .m3u or .txt.

A playlist consists of filenames, one entry per line. Comments in playlists are introduced by a ‘#’ sign at the beginning of a line and ignored by ezstream.

<playlist_program />

(Optional.) Set to 1 (one) to indicate that the file in <filename/> is actually an executable program or script. If set to 0 (zero), <filename/> content is assumed to be a media file, playlist file or the keyword stdin (the default).

See the SCRIPTING section for details on how the playlist program must behave.

<shuffle />

(Optional.) Set to 1 (one) to randomly shuffle the entries of the playlist specified in <filename/>. Files are played sequentially if set to 0 (zero) or when the <shuffle/> element is absent. This option will be ignored if <playlist_program/> is set to 1 (one.)

<metadata_progname />

(Optional.) Set the path and name of an executable program or script that should be used by ezstream to set the metadata of the stream. The program is automatically queried when a new track is streamed, or whenever the SIGUSR2 signal is received.

If the <metadata_progname/> element is present in the configuration, no attempts will be made to read metadata from files that are being streamed. If this behavior is not desired, it should be removed or commented out in the configuration file.

See the SCRIPTING section for details on how the metadata program must behave.

<metadata_format />

(Optional.) Set the format of the string that should be used for the ‘@M@’ placeholder when setting metadata with an external program or script via <metadata_progname/>.

See the METADATA section for details on how metadata is handled by ezstream.

<stream_once />

Set to 1 (one) in order to stream the content of <filename/> only once, and to 0 (zero) for continuous streaming (the default).

<reconnect_tries />

Set how many attempts should be made to reconnect to the Icecast server in case the connection is interrupted. The default is to try indefinitely, which is equal to setting this configuration option to 0 (zero).

<svrinfoname />

(Optional.) Set the name of the broadcast. Informational only.

<svrinfourl />

(Optional.) Set the URL of the web site associated with the broadcast. Informational only.

<svrinfogenre />

(Optional.) Set the genre of the broadcast. Informational only, used for YP.

<svrinfodescription />

(Optional.) Set the description of the broadcast. Informational only, used for YP.

<svrinfobitrate />

(Optional.) Set the bit rate of the broadcast. This setting is also purely informational and only used for YP. The value is set by the user and not ezstream, and should match the bit rate of the stream.

<svrinfoquality />

(Optional.) Set the quality setting of an Ogg Vorbis broadcast. Informational only and needs to be set by the user, used for YP.

<svrinfochannels />

(Optional.) Set the number of audio channels in the broadcast, e.g. 1 (one) for mono or 2 for stereo. Informational only and needs to be set by the user, used for YP.

<svrinfosamplerate />

(Optional.) Set the sample rate of the broadcast. Informational only and needs to be set by the user, used for YP.

<svrinfopublic />

(Optional.) Set to 1 (one) if the broadcast may be listed in a public YP directory. If set to 0 (zero), the Icecast server will not submit this stream to a YP directory, which is also the default if the <svrinfopublic/> element is absent.

<reencode />

(Optional.) Element that contains child elements, which specify if and how re-encoding should be done.

Re-encoding settings

<enable />

Set to 1 (one) to enable re-encoding. If set to 0 (zero), no re-encoding will be done, which is also the default if the <enable/> element is absent.

<encdec />

Element that contains child elements, which specify how to decode and encode a certain media file format for streaming. Each format is described by a separate <encdec/> element.

Decoder/Encoder settings

<format />

This element is used by ezstream to find the appropriate encoder for the output stream format specified in the <format/> element inside the global configuration. For consistency reasons, it is recommended that this element is always supplied, even for currently unsupported output formats, with content such as VORBIS, MP3, THEORA, FLAC, et cetera.

<match />

Set the filename extension used to identify a given media file format. This allows ezstream to find the appropriate decoder for a given file. Should be set to .mp3 for MP3, .flac for FLAC, .ogg for Ogg Vorbis, and so on.

<decode />

Set the command to decode the specified media file format to raw data and send it to standard output. During runtime, the placeholder ‘@T@’ is replaced with the name of the media file, as it is specified in the <filename/> element or contained in a playlist file. It should always be enclosed in quotes, to prevent problems with filenames that contain whitespaces.

Metadata placeholders can be used in the <decode/> element as well, for combined de-/encoder programs that produce data that can be streamed. See the METADATA section for details on how metadata is handled by ezstream.

For example, to decode Ogg Vorbis files using the oggdec utility:

<decode>oggdec -R -o - "@T@"</decode>

<encode />

Set the command to encode raw data, received from standard input, to the specified stream format.

Metadata placeholders can be used in the <encode/> element. For details about using metadata in ezstream, see below in the METADATA section.

For example, to encode an Ogg Vorbis stream using the quality setting 1.5 with the oggenc utility:

<encode>oggenc -r -q 1.5 -t "@M@" -</encode>

Common Rules

• The program must be an executable file.
• The program must write one line to standard output and exit.
• The program must not require arbitrary command line options to function. A wrapper script must be used if there is no other way.

Playlist Programs

• The program must return only filenames, with one filename per execution.
• The program should not return an empty line unless ezstream is supposed to know that the end of the playlist has been reached. This is significant when the <stream_once/> option is enabled.

Metadata Programs

• The program must not return anything (just a newline character is okay) if it is called by ezstream with a command line parameter that the program does not support.
• When called without command line parameters, the program should return a complete string that should be used for metadata.
• When called with the command line parameter “artist”, the program should return only the artist information of the metadata. (Optional.)
• When called with the command line parameter “title”, the program should return only the title information of the metadata. (Optional.)
• The supplied metadata must be encoded in UTF-8.

Metadata Placeholders

@T@

Replaced with the media file name. Required in <decode/> and is available in <metadata_format/>.

@M@

Replaced with a metadata string. See below for a detailed explanation. Available in <decode/> and <encode/>.

@a@

Replaced with the artist information. Available in <decode/>, <encode/> and <metadata_format/>.

@t@

Replaced with the title information. Available in <decode/>, <encode/> and <metadata_format/>.

@s@

Replaced with the string returned by <metadata_progname/> when called without any command line parameters. Available only in <metadata_format/>.

The @M@ Placeholder

If ('@M@ is present')
    If ('<metadata_progname/>' AND '<metadata_format/>')
        Replace with format string result.
    Else
        If (NOT '<metadata_progname/>' AND '@t@ is present')
            Replace with empty string.
        else
            Replace with generated metadata string.
        Endif
    Endif
Endif

The generated metadata string for ‘@M@’ is of the format “Artist - Title”, if both artist and title information is available. If one of the two is missing, the available one is displayed without a leading or trailing dash, e.g. just “Artist”. If neither artist nor title are available, the name of the media file — without its file extension — is used.

Metadata Caveats

Metadata updates during runtime are done with a relatively broken feature of libshout. Additional metadata information that is already present in the stream sent via ezstream is usually destroyed and replaced with the new data. It is not possible to properly discern between artist and title information, which means that anything set with the SIGUSR2 feature will continue to end up entirely in the “Title” field of a stream.

Of all possible Ogg-based streams, only Ogg Vorbis can have its metadata manipulated by Icecast. Any attempt of ezstream to update other Ogg metadata is actually a no-op.

While ezstream tries to do its best with relaying metadata accurately to Icecast, and subsequently the listeners, different codesets and locales can pose a problem. Especially when streaming MP3 files, it may help to explicitly set a codeset to work with via the LC_CTYPE environment variable, as ezstream assumes ID3v1 tags to be in the user's current locale. Note that, even though support for different locales is provided by ezstream, Icecast itself and the listening clients also have a say in the matter. The only way to ensure consistent results with metadata in non-Ogg streams is to use the characters available in the ISO-8859-1 codeset.

External encoders may put additional, and possibly artificial, restrictions on valid characters in metadata.