NAME

SYNOPSIS

forw [-help] [-version] [+folder] [msgs] [-annotate | -noannotate] [-form formfile] [-format | -noformat] [-filter filterfile] [-inplace | -noinplace] [-mime | -nomime] [-draftfolder +folder] [-draftmessage msg] [-nodraftfolder] [-editor editor] [-noedit] [-width columns] [-from address] [-to address] [-cc address] [-fcc +folder] [-subject text] [-whatnowproc program] [-nowhatnowproc] [-dashstuffing | -nodashstuffing] [-build] [-file msgfile]

forw [-help] [-version] [+folder] [msgs] [-digest list] [-issue number] [-volume number] [other switches for forw]

DESCRIPTION

The default message template will direct forw to construct the draft as follows:

From: {from switch} or <Local-Mailbox> or <username@hostname>
To: {to switch} or blank
Fcc: {fcc switch} or +outbox
Subject: {subject switch} or "{original subject} (fwd)"
--------

If a file named “forwcomps” exists in the user's nmh directory, it will be used instead of this default form. You may also specify an alternate forms file with the switch -form formfile. Forms are processed via the nmh template system; see mh-format(5) for details. Components from the first forwarded message are available as standard component escapes in the forms file.

In addition to the standard mh-format escapes, the following component escapes are also supported:

Escape	Returns	Description
fcc	string	Any folders specified with `-fcc folder'
nmh-from	string	Addresses specified with `-from address'
nmh-to	string	Addresses specified with `-to address'
nmh-cc	string	Addresses specified with `-cc address'
nmh-subject	string	Any text specified with `-subject text'

By default, the “To:” and “cc:” fields are empty. You may add addresses to these fields with the -to address and -cc address switches. You may give these switches multiple times to add multiple addresses.

By default, the “From:” field contains either the value of the Local-Mailbox profile entry, or a system default email address. This default can be overridden by using the -from address switch. The default mailbox in the “Fcc:” field is +outbox. This can be overridden by the -fcc switch.

Any text given to the -subject switch will be placed in the “Subject:” field in the draft.

If the draft already exists, forw will ask you as to the disposition of the draft. A reply of quit will abort forw, leaving the draft intact; replace will replace the existing draft with a blank skeleton; and list will display the draft.

If the -annotate switch is given, each message being forwarded will be annotated with the lines:

Forwarded: date
Forwarded: addrs

where each address list contains as many lines as required. This annotation will be done only if the message is sent directly from forw. If the message is not sent immediately from forw, “comp -use” may be used to re-edit and send the constructed message, but the annotations won't take place. Normally, annotations are done in place in order to preserve any links to the message. You may change this by using the -noinplace switch.

See comp(1) for a description of the -editor and -noedit switches.

Although forw uses a forms (components) file to construct the initial draft, a message filter file is used to format each forwarded message in the body of the draft. The filter file for forw should be a standard form file for mhl(1), as forw will invoke mhl to filter (re-format) the forwarded messages prior to being output to the body of the draft.

The switches -noformat, -format, and -filter filterfile specify which message filter file to use. If -noformat is specified (this is the default), then each forwarded message is output into the draft exactly as it appears, with no mhl filtering. If -format is specified, then the following default message filter file, “mhl.forward”, which should be adequate for most users, is used:

; mhl.forward
;
; default message filter for `forw' (forw -format)
;
width=80,overflowtext=,overflowoffset=10
leftadjust,compress,compwidth=9
Date:formatfield="%<(nodate{text})%{text}%|%(tws{text})%>"
From:
To:
cc:
Subject:
:
body:nocomponent,overflowoffset=0,noleftadjust,nocompress

If a file named “mhl.forward” exists in the user's nmh directory, it will be used instead. You may specify an alternate message filter file with the switch -filter filterfile.

Each forwarded message is separated with an encapsulation delimiter. By default, any dashes in the first column of the forwarded messages will be prepended with `- ' so that when received, the message is suitable for bursting by burst(1). This follows the guidelines in RFC 934. You may use the -nodashstuffing switch to suppress this form of quoting.

Users of prompter(1) can, by specifying prompter's -prepend switch in the .mh_profile file, prepend any commentary text before the forwarded messages.

To use the MIME rules for encapsulation, specify the -mime switch. This directs forw to generate an mhbuild composition file. Note that nmh will not invoke mhbuild automatically; you must specifically give the command

What now? mime

prior to sending the draft.

The -draftfolder +folder and -draftmessage msg switches invoke the nmh draft folder facility. This is an advanced (and highly useful) feature. Consult mh-draft(5) for more information.

The -editor editor switch indicates the editor to use for the initial edit. Upon exiting from the editor, comp will invoke the whatnow program. See whatnow(1) for a discussion of available options. The invocation of this program can be inhibited by using the -nowhatnowproc switch. (In fact, it is the whatnow program which starts the initial edit. Hence, -nowhatnowproc will prevent any edit from occurring.)

The -build switch is intended to be used by the Emacs mh-e interface to nmh. It implies -nowhatnowproc. It causes a file <mh-dir>/draft to be created, containing the draft message that would normally be presented to the user for editing. No mail is actually sent.

The -file msgfile switch specifies the message to be forwarded as an exact filename rather than as an nmh folder and message number. This switch implies -noannotate. The forwarded message is simply copied verbatim into the draft; the processing implied by the -filter, -mime, and -digest switches is bypassed, and the usual leading and trailing 'Forwarded Message' delimiters are not added. The same caveats apply to this option as to the -build switch.

The -digest list, -issue number, and -volume number switches implement a digest facility for nmh. Specifying these switches enables and/or overloads the following escapes:

Type	Escape	Returns	Description
component	digest	string	Argument to `-digest'
function	cur	integer	Argument to `-volume'
function	msg	integer	Argument to `-issue'

FILES

/usr/local/etc/nmh/forwcomps

The default message skeleton.

<mh-dir>/forwcomps

The user's message skeleton.

/usr/local/etc/nmh/digestcomps

The default message skeleton if -digest is given.

<mh-dir>/digestcomps

The user's -digest skeleton.

^/usr/local/etc/nmh/mhl.forward

The default message filter.

<mh-dir>/mhl.forward

The user's message filter.

^$HOME/.mh_profile

The user's profile.

PROFILE COMPONENTS

Path:

To determine the user's nmh directory.

Current-Folder:

To find the default current folder.

Draft-Folder:

To find the default draft-folder.

Editor:

To override the default editor.

Msg-Protect:

To set mode when creating a new message (draft).

fileproc:

Program to refile the message.

mhlproc:

Program to filter messages being forwarded.

whatnowproc:

Program to ask the “What now?” questions.

SEE ALSO

Proposed Standard for Message Encapsulation (RFC 934)

DEFAULTS

+folder

The current folder.

msgs

The current message.

-noannotate

-nodraftfolder

-noformat

-inplace

-dashstuffing

-nomime

CONTEXT

BUGS

When forw is told to annotate the messages it forwards, it doesn't actually annotate them until the draft is successfully sent. If, from the whatnowproc, you push instead of send, it is possible to confuse forw by re-ordering the file (e.g. by using “folder -pack”) before the message is successfully sent. dist and repl don't have this problem.