service-connector

Description

Available Commands

activate

Description

After you send your request, the service connector’s state is temporarily UPDATING. When the state changes to ACTIVE, data begins transferring from the source service to the target service. For instructions on activating service connectors, see To activate a service connector <https://docs.cloud.oracle.com/iaas/Content/service-connector-hub/managingconnectors.htm#activate>.

Usage

oci sch service-connector activate [OPTIONS]

Required Parameters

The OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the service connector.

Optional Parameters

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

For optimistic concurrency control. In the PUT or DELETE call for a resource, set the if-match parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource’s current etag value.

The maximum time to wait for the work request to reach the state defined by --wait-for-state. Defaults to 1200 seconds.

This operation asynchronously creates, modifies or deletes a resource and uses a work request to track the progress of the operation. Specify this option to perform the action and then wait until the work request reaches a certain state. Multiple states can be specified, returning on the first state. For example, --wait-for-state SUCCEEDED --wait-for-state FAILED would return on whichever lifecycle state is reached first. If timeout is reached, a return code of 2 is returned. For any other error, a return code of 1 is returned.

Accepted values are:

ACCEPTED, CANCELED, CANCELING, FAILED, IN_PROGRESS, SUCCEEDED

Check every --wait-interval-seconds to see whether the work request to see if it has reached the state defined by --wait-for-state. Defaults to 30 seconds.

Global Parameters

--auth-purpose, --auth, --cert-bundle, --cli-auto-prompt, --cli-rc-file, --config-file, --debug, --defaults-file, --endpoint, --generate-full-command-json-input, --generate-param-json-input, --help, --latest-version, --max-retries, --no-retry, --opc-client-request-id, --opc-request-id, --output, --profile, --query, --raw-output, --region, --release-info, --request-id, --version, -?, -d, -h, -i, -v

Examples

    oci sch service-connector create --generate-param-json-input source > source.json
    oci sch service-connector create --generate-param-json-input target > target.json

Copy the following CLI commands into a file named example.sh. Run the command by typing “bash example.sh” and replacing the example parameters with your own.

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration <https://docs.oracle.com/en-us/iaas/Content/API/SDKDocs/cliinstall.htm#configfile> and appropriate security policies <https://docs.oracle.com/en-us/iaas/Content/Identity/Concepts/policygetstarted.htm> before trying the examples.

    export compartment_id=<substitute-value-of-compartment_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-compartment-id
    export display_name=<substitute-value-of-display_name> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-display-name
    service_connector_id=$(oci sch service-connector create --compartment-id $compartment_id --display-name $display_name --source file://source.json --target file://target.json --query data.id --raw-output)
    oci sch service-connector activate --service-connector-id $service_connector_id

change-compartment

Description

When provided, If-Match is checked against ETag values of the resource.

Usage

oci sch service-connector change-compartment [OPTIONS]

Required Parameters

The OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the compartment to move the service connector to.

The OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the service connector.

Optional Parameters

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

For optimistic concurrency control. In the PUT or DELETE call for a resource, set the if-match parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource’s current etag value.

The maximum time to wait for the work request to reach the state defined by --wait-for-state. Defaults to 1200 seconds.

This operation asynchronously creates, modifies or deletes a resource and uses a work request to track the progress of the operation. Specify this option to perform the action and then wait until the work request reaches a certain state. Multiple states can be specified, returning on the first state. For example, --wait-for-state SUCCEEDED --wait-for-state FAILED would return on whichever lifecycle state is reached first. If timeout is reached, a return code of 2 is returned. For any other error, a return code of 1 is returned.

Accepted values are:

ACCEPTED, CANCELED, CANCELING, FAILED, IN_PROGRESS, SUCCEEDED

Check every --wait-interval-seconds to see whether the work request to see if it has reached the state defined by --wait-for-state. Defaults to 30 seconds.

Global Parameters

--auth-purpose, --auth, --cert-bundle, --cli-auto-prompt, --cli-rc-file, --config-file, --debug, --defaults-file, --endpoint, --generate-full-command-json-input, --generate-param-json-input, --help, --latest-version, --max-retries, --no-retry, --opc-client-request-id, --opc-request-id, --output, --profile, --query, --raw-output, --region, --release-info, --request-id, --version, -?, -d, -h, -i, -v

Examples

    oci sch service-connector create --generate-param-json-input source > source.json
    oci sch service-connector create --generate-param-json-input target > target.json

Copy the following CLI commands into a file named example.sh. Run the command by typing “bash example.sh” and replacing the example parameters with your own.

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration <https://docs.oracle.com/en-us/iaas/Content/API/SDKDocs/cliinstall.htm#configfile> and appropriate security policies <https://docs.oracle.com/en-us/iaas/Content/Identity/Concepts/policygetstarted.htm> before trying the examples.

    export compartment_id=<substitute-value-of-compartment_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-compartment-id
    export display_name=<substitute-value-of-display_name> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-display-name
    service_connector_id=$(oci sch service-connector create --compartment-id $compartment_id --display-name $display_name --source file://source.json --target file://target.json --query data.id --raw-output)
    oci sch service-connector change-compartment --compartment-id $compartment_id --service-connector-id $service_connector_id

create

Description

For purposes of access control, you must provide the OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the compartment where you want the service connector to reside. Notice that the service connector doesn’t have to be in the same compartment as the source or target services. For information about access control and compartments, see Overview of the IAM Service <https://docs.cloud.oracle.com/iaas/Content/Identity/Concepts/overview.htm>.

After you send your request, the new service connector’s state is temporarily CREATING. When the state changes to ACTIVE, data begins transferring from the source service to the target service. For instructions on deactivating and activating service connectors, see To activate or deactivate a service connector <https://docs.cloud.oracle.com/iaas/Content/service-connector-hub/overview.htm>.

Usage

oci sch service-connector create [OPTIONS]

Required Parameters

The OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the comparment to create the service connector in.

A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information.

For documentation on SourceDetails please see our API reference: https://docs.oracle.com/en-us/iaas/api/#/en/serviceconnectors/20200909/datatypes/SourceDetails. This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

For documentation on TargetDetails please see our API reference: https://docs.oracle.com/en-us/iaas/api/#/en/serviceconnectors/20200909/datatypes/TargetDetails. This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

Optional Parameters

Defined tags for this resource. Each key is predefined and scoped to a namespace. Example: {“foo-namespace”: {“bar-key”: “value”}} This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

The description of the resource. Avoid entering confidential information.

Simple key-value pair that is applied without any predefined name, type or scope. Exists for cross-compatibility only. Example: {“bar-key”: “value”} This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

The maximum time to wait for the work request to reach the state defined by --wait-for-state. Defaults to 1200 seconds.

The list of tasks.

This option is a JSON list with items of type TaskDetails. For documentation on TaskDetails please see our API reference: https://docs.cloud.oracle.com/api/#/en/serviceconnectors/20200909/datatypes/TaskDetails. This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

This operation asynchronously creates, modifies or deletes a resource and uses a work request to track the progress of the operation. Specify this option to perform the action and then wait until the work request reaches a certain state. Multiple states can be specified, returning on the first state. For example, --wait-for-state SUCCEEDED --wait-for-state FAILED would return on whichever lifecycle state is reached first. If timeout is reached, a return code of 2 is returned. For any other error, a return code of 1 is returned.

Accepted values are:

ACCEPTED, CANCELED, CANCELING, FAILED, IN_PROGRESS, SUCCEEDED

Check every --wait-interval-seconds to see whether the work request to see if it has reached the state defined by --wait-for-state. Defaults to 30 seconds.

Global Parameters

--auth-purpose, --auth, --cert-bundle, --cli-auto-prompt, --cli-rc-file, --config-file, --debug, --defaults-file, --endpoint, --generate-full-command-json-input, --generate-param-json-input, --help, --latest-version, --max-retries, --no-retry, --opc-client-request-id, --opc-request-id, --output, --profile, --query, --raw-output, --region, --release-info, --request-id, --version, -?, -d, -h, -i, -v

Examples

    oci sch service-connector create --generate-param-json-input source > source.json
    oci sch service-connector create --generate-param-json-input target > target.json

Copy the following CLI commands into a file named example.sh. Run the command by typing “bash example.sh” and replacing the example parameters with your own.

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration <https://docs.oracle.com/en-us/iaas/Content/API/SDKDocs/cliinstall.htm#configfile> and appropriate security policies <https://docs.oracle.com/en-us/iaas/Content/Identity/Concepts/policygetstarted.htm> before trying the examples.

    export compartment_id=<substitute-value-of-compartment_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-compartment-id
    export display_name=<substitute-value-of-display_name> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-display-name
    oci sch service-connector create --compartment-id $compartment_id --display-name $display_name --source file://source.json --target file://target.json

deactivate

Description

After you send your request, the service connector’s state is temporarily UPDATING and any data transfer stops. The state then changes to INACTIVE. For instructions on deactivating service connectors, see To deactivate a service connector <https://docs.cloud.oracle.com/iaas/Content/service-connector-hub/managingconnectors.htm#deactivate>.

Usage

oci sch service-connector deactivate [OPTIONS]

Required Parameters

The OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the service connector.

Optional Parameters

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

For optimistic concurrency control. In the PUT or DELETE call for a resource, set the if-match parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource’s current etag value.

The maximum time to wait for the work request to reach the state defined by --wait-for-state. Defaults to 1200 seconds.

This operation asynchronously creates, modifies or deletes a resource and uses a work request to track the progress of the operation. Specify this option to perform the action and then wait until the work request reaches a certain state. Multiple states can be specified, returning on the first state. For example, --wait-for-state SUCCEEDED --wait-for-state FAILED would return on whichever lifecycle state is reached first. If timeout is reached, a return code of 2 is returned. For any other error, a return code of 1 is returned.

Accepted values are:

ACCEPTED, CANCELED, CANCELING, FAILED, IN_PROGRESS, SUCCEEDED

Check every --wait-interval-seconds to see whether the work request to see if it has reached the state defined by --wait-for-state. Defaults to 30 seconds.

Global Parameters

--auth-purpose, --auth, --cert-bundle, --cli-auto-prompt, --cli-rc-file, --config-file, --debug, --defaults-file, --endpoint, --generate-full-command-json-input, --generate-param-json-input, --help, --latest-version, --max-retries, --no-retry, --opc-client-request-id, --opc-request-id, --output, --profile, --query, --raw-output, --region, --release-info, --request-id, --version, -?, -d, -h, -i, -v

Examples

    oci sch service-connector create --generate-param-json-input source > source.json
    oci sch service-connector create --generate-param-json-input target > target.json

Copy the following CLI commands into a file named example.sh. Run the command by typing “bash example.sh” and replacing the example parameters with your own.

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration <https://docs.oracle.com/en-us/iaas/Content/API/SDKDocs/cliinstall.htm#configfile> and appropriate security policies <https://docs.oracle.com/en-us/iaas/Content/Identity/Concepts/policygetstarted.htm> before trying the examples.

    export compartment_id=<substitute-value-of-compartment_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-compartment-id
    export display_name=<substitute-value-of-display_name> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-display-name
    service_connector_id=$(oci sch service-connector create --compartment-id $compartment_id --display-name $display_name --source file://source.json --target file://target.json --query data.id --raw-output)
    oci sch service-connector deactivate --service-connector-id $service_connector_id

delete

Description

After you send your request, the service connector’s state is temporarily DELETING and any data transfer stops. The state then changes to DELETED.

Usage

oci sch service-connector delete [OPTIONS]

Required Parameters

The OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the service connector.

Optional Parameters

Perform deletion without prompting for confirmation.

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

For optimistic concurrency control. In the PUT or DELETE call for a resource, set the if-match parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource’s current etag value.

The maximum time to wait for the work request to reach the state defined by --wait-for-state. Defaults to 1200 seconds.

This operation asynchronously creates, modifies or deletes a resource and uses a work request to track the progress of the operation. Specify this option to perform the action and then wait until the work request reaches a certain state. Multiple states can be specified, returning on the first state. For example, --wait-for-state SUCCEEDED --wait-for-state FAILED would return on whichever lifecycle state is reached first. If timeout is reached, a return code of 2 is returned. For any other error, a return code of 1 is returned.

Accepted values are:

ACCEPTED, CANCELED, CANCELING, FAILED, IN_PROGRESS, SUCCEEDED

Check every --wait-interval-seconds to see whether the work request to see if it has reached the state defined by --wait-for-state. Defaults to 30 seconds.

Global Parameters

--auth-purpose, --auth, --cert-bundle, --cli-auto-prompt, --cli-rc-file, --config-file, --debug, --defaults-file, --endpoint, --generate-full-command-json-input, --generate-param-json-input, --help, --latest-version, --max-retries, --no-retry, --opc-client-request-id, --opc-request-id, --output, --profile, --query, --raw-output, --region, --release-info, --request-id, --version, -?, -d, -h, -i, -v

Examples

    oci sch service-connector create --generate-param-json-input source > source.json
    oci sch service-connector create --generate-param-json-input target > target.json

Copy the following CLI commands into a file named example.sh. Run the command by typing “bash example.sh” and replacing the example parameters with your own.

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration <https://docs.oracle.com/en-us/iaas/Content/API/SDKDocs/cliinstall.htm#configfile> and appropriate security policies <https://docs.oracle.com/en-us/iaas/Content/Identity/Concepts/policygetstarted.htm> before trying the examples.

    export compartment_id=<substitute-value-of-compartment_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-compartment-id
    export display_name=<substitute-value-of-display_name> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-display-name
    service_connector_id=$(oci sch service-connector create --compartment-id $compartment_id --display-name $display_name --source file://source.json --target file://target.json --query data.id --raw-output)
    oci sch service-connector delete --service-connector-id $service_connector_id

get

Description

Usage

oci sch service-connector get [OPTIONS]

Required Parameters

The OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the service connector.

Optional Parameters

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

Global Parameters

--auth-purpose, --auth, --cert-bundle, --cli-auto-prompt, --cli-rc-file, --config-file, --debug, --defaults-file, --endpoint, --generate-full-command-json-input, --generate-param-json-input, --help, --latest-version, --max-retries, --no-retry, --opc-client-request-id, --opc-request-id, --output, --profile, --query, --raw-output, --region, --release-info, --request-id, --version, -?, -d, -h, -i, -v

Examples

    oci sch service-connector create --generate-param-json-input source > source.json
    oci sch service-connector create --generate-param-json-input target > target.json

Copy the following CLI commands into a file named example.sh. Run the command by typing “bash example.sh” and replacing the example parameters with your own.

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration <https://docs.oracle.com/en-us/iaas/Content/API/SDKDocs/cliinstall.htm#configfile> and appropriate security policies <https://docs.oracle.com/en-us/iaas/Content/Identity/Concepts/policygetstarted.htm> before trying the examples.

    export compartment_id=<substitute-value-of-compartment_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-compartment-id
    export display_name=<substitute-value-of-display_name> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-display-name
    service_connector_id=$(oci sch service-connector create --compartment-id $compartment_id --display-name $display_name --source file://source.json --target file://target.json --query data.id --raw-output)
    oci sch service-connector get --service-connector-id $service_connector_id

list

Description

Usage

oci sch service-connector list [OPTIONS]

Required Parameters

The OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the compartment for this request.

Optional Parameters

Fetches all pages of results. If you provide this option, then you cannot provide the --limit option.

A filter to return only resources that match the given display name exactly.

Example:

example_service_connector

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

A filter to return only resources that match the given lifecycle state.

Example:

ACTIVE

Accepted values are:

ACTIVE, CREATING, DELETED, DELETING, FAILED, INACTIVE, UPDATING

For list pagination. The maximum number of results per page, or items to return in a paginated “List” call. For important details about how pagination works, see List Pagination <https://docs.cloud.oracle.com/iaas/Content/API/Concepts/usingapi.htm#nine>.

For list pagination. The value of the opc-next-page response header from the previous “List” call. For important details about how pagination works, see List Pagination <https://docs.cloud.oracle.com/iaas/Content/API/Concepts/usingapi.htm#nine>.

When fetching results, the number of results to fetch per call. Only valid when used with --all or --limit, and ignored otherwise.

The field to sort by. Only one sort order may be provided. Default order for timeCreated is descending. Default order for displayName is ascending. If no value is specified timeCreated is default.

Accepted values are:

displayName, timeCreated

The sort order to use, either ‘asc’ or ‘desc’.

Accepted values are:

ASC, DESC

Global Parameters

--auth-purpose, --auth, --cert-bundle, --cli-auto-prompt, --cli-rc-file, --config-file, --debug, --defaults-file, --endpoint, --generate-full-command-json-input, --generate-param-json-input, --help, --latest-version, --max-retries, --no-retry, --opc-client-request-id, --opc-request-id, --output, --profile, --query, --raw-output, --region, --release-info, --request-id, --version, -?, -d, -h, -i, -v

Examples

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration <https://docs.oracle.com/en-us/iaas/Content/API/SDKDocs/cliinstall.htm#configfile> and appropriate security policies <https://docs.oracle.com/en-us/iaas/Content/Identity/Concepts/policygetstarted.htm> before trying the examples.

    export compartment_id=<substitute-value-of-compartment_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/list.html#cmdoption-compartment-id
    oci sch service-connector list --compartment-id $compartment_id

update

Description

After you send your request, the service connector’s state is temporarily UPDATING and any data transfer pauses. The state then changes back to its original value: if ACTIVE, then data transfer resumes.

Usage

oci sch service-connector update [OPTIONS]

Required Parameters

The OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the service connector.

Optional Parameters

Defined tags for this resource. Each key is predefined and scoped to a namespace. Example: {“foo-namespace”: {“bar-key”: “value”}} This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

The description of the resource. Avoid entering confidential information.

A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information.

Perform update without prompting for confirmation.

Simple key-value pair that is applied without any predefined name, type or scope. Exists for cross-compatibility only. Example: {“bar-key”: “value”} This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

For optimistic concurrency control. In the PUT or DELETE call for a resource, set the if-match parameter to the value of the etag from a previous GET or POST response for that resource. The resource will be updated or deleted only if the etag you provide matches the resource’s current etag value.

The maximum time to wait for the work request to reach the state defined by --wait-for-state. Defaults to 1200 seconds.

This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

The list of the tasks.

This option is a JSON list with items of type TaskDetails. For documentation on TaskDetails please see our API reference: https://docs.cloud.oracle.com/api/#/en/serviceconnectors/20200909/datatypes/TaskDetails. This is a complex type whose value must be valid JSON. The value can be provided as a string on the command line or passed in as a file using the file://path/to/file syntax.

The --generate-param-json-input option can be used to generate an example of the JSON which must be provided. We recommend storing this example in a file, modifying it as needed and then passing it back in via the file:// syntax.

This operation asynchronously creates, modifies or deletes a resource and uses a work request to track the progress of the operation. Specify this option to perform the action and then wait until the work request reaches a certain state. Multiple states can be specified, returning on the first state. For example, --wait-for-state SUCCEEDED --wait-for-state FAILED would return on whichever lifecycle state is reached first. If timeout is reached, a return code of 2 is returned. For any other error, a return code of 1 is returned.

Accepted values are:

ACCEPTED, CANCELED, CANCELING, FAILED, IN_PROGRESS, SUCCEEDED

Check every --wait-interval-seconds to see whether the work request to see if it has reached the state defined by --wait-for-state. Defaults to 30 seconds.

Global Parameters

--auth-purpose, --auth, --cert-bundle, --cli-auto-prompt, --cli-rc-file, --config-file, --debug, --defaults-file, --endpoint, --generate-full-command-json-input, --generate-param-json-input, --help, --latest-version, --max-retries, --no-retry, --opc-client-request-id, --opc-request-id, --output, --profile, --query, --raw-output, --region, --release-info, --request-id, --version, -?, -d, -h, -i, -v

Examples

    oci sch service-connector create --generate-param-json-input source > source.json
    oci sch service-connector create --generate-param-json-input target > target.json

Copy the following CLI commands into a file named example.sh. Run the command by typing “bash example.sh” and replacing the example parameters with your own.

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration <https://docs.oracle.com/en-us/iaas/Content/API/SDKDocs/cliinstall.htm#configfile> and appropriate security policies <https://docs.oracle.com/en-us/iaas/Content/Identity/Concepts/policygetstarted.htm> before trying the examples.

    export compartment_id=<substitute-value-of-compartment_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-compartment-id
    export display_name=<substitute-value-of-display_name> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/service-connector/create.html#cmdoption-display-name
    service_connector_id=$(oci sch service-connector create --compartment-id $compartment_id --display-name $display_name --source file://source.json --target file://target.json --query data.id --raw-output)
    oci sch service-connector update --service-connector-id $service_connector_id

work-request

Description

Many of the API requests you use to create and configure service connectors do not take effect immediately. In these cases, the request spawns an asynchronous work flow to fulfill the request. WorkRequest objects provide visibility for in-progress work flows. For more information about work requests, see Viewing the State of a Work Request <https://docs.cloud.oracle.com/iaas/Content/service-connector-hub/workrequests.htm>.

Available Commands

get

Description

Usage

oci sch work-request get [OPTIONS]

Required Parameters

The OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the work request.

Optional Parameters

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

Global Parameters

--auth-purpose, --auth, --cert-bundle, --cli-auto-prompt, --cli-rc-file, --config-file, --debug, --defaults-file, --endpoint, --generate-full-command-json-input, --generate-param-json-input, --help, --latest-version, --max-retries, --no-retry, --opc-client-request-id, --opc-request-id, --output, --profile, --query, --raw-output, --region, --release-info, --request-id, --version, -?, -d, -h, -i, -v

Examples

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration <https://docs.oracle.com/en-us/iaas/Content/API/SDKDocs/cliinstall.htm#configfile> and appropriate security policies <https://docs.oracle.com/en-us/iaas/Content/Identity/Concepts/policygetstarted.htm> before trying the examples.

    export work_request_id=<substitute-value-of-work_request_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/work-request/get.html#cmdoption-work-request-id
    oci sch work-request get --work-request-id $work_request_id

list

Description

Usage

oci sch work-request list [OPTIONS]

Required Parameters

The OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the compartment for this request.

Optional Parameters

Fetches all pages of results. If you provide this option, then you cannot provide the --limit option.

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

For list pagination. The maximum number of results per page, or items to return in a paginated “List” call. For important details about how pagination works, see List Pagination <https://docs.cloud.oracle.com/iaas/Content/API/Concepts/usingapi.htm#nine>.

For list pagination. The value of the opc-next-page response header from the previous “List” call. For important details about how pagination works, see List Pagination <https://docs.cloud.oracle.com/iaas/Content/API/Concepts/usingapi.htm#nine>.

When fetching results, the number of results to fetch per call. Only valid when used with --all or --limit, and ignored otherwise.

Global Parameters

--auth-purpose, --auth, --cert-bundle, --cli-auto-prompt, --cli-rc-file, --config-file, --debug, --defaults-file, --endpoint, --generate-full-command-json-input, --generate-param-json-input, --help, --latest-version, --max-retries, --no-retry, --opc-client-request-id, --opc-request-id, --output, --profile, --query, --raw-output, --region, --release-info, --request-id, --version, -?, -d, -h, -i, -v

Examples

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration <https://docs.oracle.com/en-us/iaas/Content/API/SDKDocs/cliinstall.htm#configfile> and appropriate security policies <https://docs.oracle.com/en-us/iaas/Content/Identity/Concepts/policygetstarted.htm> before trying the examples.

    export compartment_id=<substitute-value-of-compartment_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/work-request/list.html#cmdoption-compartment-id
    oci sch work-request list --compartment-id $compartment_id

work-request-error

Description

Available Commands

list

Description

Usage

oci sch work-request-error list [OPTIONS]

Required Parameters

The OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the work request.

Optional Parameters

Fetches all pages of results. If you provide this option, then you cannot provide the --limit option.

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

For list pagination. The maximum number of results per page, or items to return in a paginated “List” call. For important details about how pagination works, see List Pagination <https://docs.cloud.oracle.com/iaas/Content/API/Concepts/usingapi.htm#nine>.

For list pagination. The value of the opc-next-page response header from the previous “List” call. For important details about how pagination works, see List Pagination <https://docs.cloud.oracle.com/iaas/Content/API/Concepts/usingapi.htm#nine>.

When fetching results, the number of results to fetch per call. Only valid when used with --all or --limit, and ignored otherwise.

Global Parameters

--auth-purpose, --auth, --cert-bundle, --cli-auto-prompt, --cli-rc-file, --config-file, --debug, --defaults-file, --endpoint, --generate-full-command-json-input, --generate-param-json-input, --help, --latest-version, --max-retries, --no-retry, --opc-client-request-id, --opc-request-id, --output, --profile, --query, --raw-output, --region, --release-info, --request-id, --version, -?, -d, -h, -i, -v

Examples

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration <https://docs.oracle.com/en-us/iaas/Content/API/SDKDocs/cliinstall.htm#configfile> and appropriate security policies <https://docs.oracle.com/en-us/iaas/Content/Identity/Concepts/policygetstarted.htm> before trying the examples.

    export work_request_id=<substitute-value-of-work_request_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/work-request-error/list.html#cmdoption-work-request-id
    oci sch work-request-error list --work-request-id $work_request_id

work-request-log-entry

Description

Available Commands

list-work-request-logs

Description

Usage

oci sch work-request-log-entry list-work-request-logs [OPTIONS]

Required Parameters

The OCID <https://docs.cloud.oracle.com/iaas/Content/General/Concepts/identifiers.htm> of the work request.

Optional Parameters

Fetches all pages of results. If you provide this option, then you cannot provide the --limit option.

Provide input to this command as a JSON document from a file using the file://path-to/file syntax.

The --generate-full-command-json-input option can be used to generate a sample json file to be used with this command option. The key names are pre-populated and match the command option names (converted to camelCase format, e.g. compartment-id –> compartmentId), while the values of the keys need to be populated by the user before using the sample file as an input to this command. For any command option that accepts multiple values, the value of the key can be a JSON array.

Options can still be provided on the command line. If an option exists in both the JSON document and the command line then the command line specified value will be used.

For examples on usage of this option, please see our “using CLI with advanced JSON options” link: https://docs.cloud.oracle.com/iaas/Content/API/SDKDocs/cliusing.htm#AdvancedJSONOptions

For list pagination. The maximum number of results per page, or items to return in a paginated “List” call. For important details about how pagination works, see List Pagination <https://docs.cloud.oracle.com/iaas/Content/API/Concepts/usingapi.htm#nine>.

For list pagination. The value of the opc-next-page response header from the previous “List” call. For important details about how pagination works, see List Pagination <https://docs.cloud.oracle.com/iaas/Content/API/Concepts/usingapi.htm#nine>.

When fetching results, the number of results to fetch per call. Only valid when used with --all or --limit, and ignored otherwise.

Global Parameters

--auth-purpose, --auth, --cert-bundle, --cli-auto-prompt, --cli-rc-file, --config-file, --debug, --defaults-file, --endpoint, --generate-full-command-json-input, --generate-param-json-input, --help, --latest-version, --max-retries, --no-retry, --opc-client-request-id, --opc-request-id, --output, --profile, --query, --raw-output, --region, --release-info, --request-id, --version, -?, -d, -h, -i, -v

Examples

Please note this sample will only work in the POSIX-compliant bash-like shell. You need to set up the OCI configuration <https://docs.oracle.com/en-us/iaas/Content/API/SDKDocs/cliinstall.htm#configfile> and appropriate security policies <https://docs.oracle.com/en-us/iaas/Content/Identity/Concepts/policygetstarted.htm> before trying the examples.

    export work_request_id=<substitute-value-of-work_request_id> # https://docs.cloud.oracle.com/en-us/iaas/tools/oci-cli/latest/oci_cli_docs/cmdref/sch/work-request-log-entry/list-work-request-logs.html#cmdoption-work-request-id
    oci sch work-request-log-entry list-work-request-logs --work-request-id $work_request_id