NAME

SYNOPSIS

DESCRIPTION

OPTIONS

-a, --audio-driver=DRIVER[:DEVICE]

Audio device configuration. driver is the SDL driver to use, e.g. alsa (ALSA), dma or dsp (OSS); device is the name of the device itself, for example hw:2 or /dev/dsp1.

-v, --video-driver=DRIVER

SDL video driver, such as x11, dga, or fbcon. Note that this is different from the video driver setting within the program, and is unlikely to be useful.

--video-yuvlayout=LAYOUT

Specific YUV layout to use: YUY2, YV12, RGBA, etc. This is probably best left alone under normal circumstances.

--video-size=WIDTHxHEIGHT

Set the size of the video display.

--video-stretch=VALUE

Fix the aspect ratio. (Probably does nothing!)

--video-gl-path=PATH

Specify path of OpenGL library.

--video-depth=DEPTH

Specify display depth, in bits.

--video-fb-device=DEVICE

Specify path to framebuffer. Typical value is /dev/fb0.

--network, --no-network

Enable/disable networking (on by default). Used for MIDI over IP.

--classic, --no-classic

Start Schism Tracker in "classic" mode, or don't. This is mostly cosmetic, although it does change the program's behavior slightly in a few places.

--display=DISPLAY

X11 display to use.

-f, -F, --fullscreen, --no-fullscreen

Enable/disable fullscreen mode at startup.

-p, -P, --play, --no-play

Start playing after loading song on command line.

--diskwrite=FILENAME

Render output to a file, and then exit. WAV or AIFF writer is auto-selected based on file extension. Include %c somewhere in the name to write each channel separately. This is meaningless if no initial filename is given.

--font-editor, --no-font-editor

Run the font editor (itf). This can also be accessed by pressing Shift-F12.

--hooks, --no-hooks

Run hooks. Enabled by default.

--debug=FLAGS

Enable some debugging flags (separated by commas). You probably don't need this.

--version

Display version information and build date.

-h, --help

Print a summary of available options.

A filename supplied on the command line will be loaded at startup. Additionally, if either a file or directory name is given, the default module, sample, and instrument paths will be set accordingly.

USAGE

The F3 key will bring you to the sample list. Press enter here to open a file browser, navigate in the list using the up/down arrow keys, and hit enter again to load a sample. You will likely want to get some samples to work with. You can also "rip" from existing modules; see for example http://www.modarchive.org/ for a very large selection of modules. (Keep in mind, however, that some authors don't appreciate having their samples ripped!)

Now that you've loaded a sample, press F2 to get to the pattern editor. This is where the majority of the composition takes place. In short, the song is laid out vertically, with each row representing 1/16 note; to play multiple notes simultaneously, they are placed in different channels. The four sub-columns of each channel are the note, sample number, volume, and effect. A list of effects is available in the pattern editor help, but you can safely ignore that column for now. Assuming a US keymap, notes are entered with the keyboard as follows: (Note) C# D# F# G# A# C# D# F# G# A# C# D# | | || | | | || || | | | || | | | || || | | | || | | | | || | | | || || | | | || | | | || || | | | || | | (What you | |S||D| | |G||H||J| | |2||3| | |5||6||7| | |9||0| | type) | '-''-' | '-''-''-' | '-''-' | '-''-''-' | '-''-' | | Z| X| C| V| B| N| M| Q| W| E| R| T| Y| U| I| O| P| '--'--'--'--'--'--'--'--'--'--'--'--'--'--'--'--'--' (Note) C D E F G A B C D E F G A B C D E (Octave 0) (Octave 1) (Octave 2)

The "/" and "*" keys on the numeric keypad change octaves, and the current octave is displayed near the top of the screen. Try typing "qwerty" into the pattern - it will enter an ascending note sequence, and you'll hear the notes as they're entered. (of course, assuming you loaded a sample!) Press F6 to play your pattern, and F8 to stop.

Other important keys for the pattern editor include Ins/Del to shift notes up and down within a channel, Shift-Arrows to mark a block, Alt-C/Alt-P to copy and paste, and Alt-U to clear the mark. There are well over a hundred key bindings for the pattern editor; it is well worth the effort to learn them all eventually.

Now that you have something in your pattern, you'll need to set up an orderlist. Press F11 to switch to the orderlist page, and type 0 to add the pattern you created. Now press F5 to start playing. The song will begin at the first order, look up the pattern number and play that pattern, then advance to the next order, and so forth.

Of course, having only one pattern isn't all that interesting, so go back to the pattern editor and press the + key to change to the next pattern. Now you can write another four bars of music and add the new pattern to the orderlist, and the next time you play the song, your two patterns will play in sequence.

You may wish to give your song a title; press F12 and type a name in the box at the top. You can also adjust the tempo and a number of other settings on this page, but for now, most of them are fine at their default values.

To save your new song, press F10, type a filename, and hit enter. You can load it again later by pressing F9.

This tutorial has deliberately omitted the instrument editor (on F4), for the purposes of brevity and simplicity. You may want to experiment with it once you have a feel for how the program works. (Select "instruments" on F12 to enable instrument mode.)

HISTORY

Schism Tracker v0.031a was released in July 2003, though very little worked at that point, and it was more of a player with primitive editing capabilities. File saving was hard-coded to write to "test.it" in the current directory, and there was no way to load a sample.

The first version that was more or less usable was 0.15a, from December 2004.

From 2005 through 2009, Mrs. Brisby did most of the development, and implemented tons of features, including MIDI support, mouse support, and disk writing.

Storlek "took over" development again in 2009, and incrementally rewrote much of the code through 2015.

In 2016, Schism Tracker was moved to GitHub under shared maintainership. Since then, many people have contributed improvements and bug fixes to the codebase.

FILES

~/.schism/config

Program settings, stored in an INI-style format. Most options are accessible from within Schism Tracker's interface, but there are a few "hidden" options.

~/.schism/startup-hook, ~/.schism/exit-hook, ~/.schism/diskwriter-hook

Optional files to execute upon certain events. (Must be executable)

~/.schism/fonts/

font.cfg, and any .itf files found in this directory, are displayed in the file browser of the font editor.

AUTHORS

Additional code and data have been contributed by many others; refer to the file AUTHORS in the source distribution for a more complete list.

The keyboard diagram in this manual page was adapted from the one used in the documentation for Impulse Tracker, which in turn borrowed it from Scream Tracker 3.

COPYRIGHT

BUGS

INTERNETS

SEE ALSO