NAME

SYNOPSIS

DESCRIPTION

OPTIONS

--altdate

Use alternative date and time text location. The date and time text will be moved from the upper right header section to the lower left corner. This option will have no effect if -nh, --noheader has been selected.

-b, --begin date

Begin the list output with a specific date / time defined by date instead of the begin being selected based on the number of entries to be shown. If date isn't available in the database then the closest later date will be used. date supports the following formats: YYYY-MM-DD HH:MM, YYYY-MM-DD and "today". This option can only be used with list outputs.

-c, --cache time

Update output file only if at least time minutes have passed since the previous file update. This option is ignored if stdout is used as output.

--config file

Use file as configuration file instead of using automatic configuration file search functionality.

-d, --days [limit]

Output traffic statistics on a daily basis for the last days. The length of the list will be limited to 30 entries unless configured otherwise or unless the optional limit parameter is used. All entries stored in the database will be shown if limit is set to 0.

--dbdir directory

Use directory as database directory instead of using the directory specified in the configuration file or the hardcoded default if no configuration file is available.

-D, --debug

Show additional debug output.

-e, --end date

End the list output with a specific date / time defined by date instead of the latest date / time in the database. If date isn't available in the database then the closest earlier date will be used. date supports the following formats: YYYY-MM-DD HH:MM and YYYY-MM-DD. This option can only be used with list outputs. The top list also requires --begin to be used at the same time with this option.

-5g, --fivegraph [limit] [height]

Output traffic statistics with a 5 minute resolution for the last 48 hours using a bar graph. The width of the graph can be modified using the optional limit parameter which represents the number of 5 minute entries with 12 entries for each hour. The smallest supported value is 288 (last 24 hours). Additionally, the height of the graph can be modified using the optional height parameter. The smallest supported height is 150 pixels.

-5, --fiveminutes [limit]

Output traffic statistics with a 5 minute resolution for the last hours. The length of the list will be limited to 24 entries unless configured otherwise or unless the optional limit parameter is used. All entries stored in the database will be shown if limit is set to 0.

--headertext text

Show text in image header section instead of automatically generated interface identification. text is limited to 64 characters and may not get completely shown if longer than the width of the image. Use with --altdate if maximal space is needed. This option will have no effect if -nh, --noheader has been selected.

-h, --hours [limit]

Output traffic statistics on a hourly basis. The length of the list will be limited to 24 entries unless configured otherwise or unless the optional limit parameter is used. All entries store in the database will be shown if the limit is set to 0.

-hg, --hoursgraph [mode]

Output traffic statistics on a hourly basis for the last 24 hours using a bar graph. The optional mode parameter can be used to override the configuration file setting. Available modes: 0 = 24 hour sliding window, 1 = graph begins from midnight.

-hs, --hsummary [graph]

Output traffic summary with the graph selected using the SummaryGraph setting in the configuration file next to it using a horizontal layout. The optional graph parameter can be used to override the configuration file setting. Available graphs: 0 = hours, 1 = 5 minutes.

-i, --iface interface

Use interface instead of default or configured interface. It is also possible to merge the information of two or more interfaces using the interface1+interface2+... syntax. All provided interfaces must be unique and must exist in the database when the merge syntax is used. Optionally, depending on the InterfaceMatchMethod configuration setting, interface can be replaced with alias previously set using vnstat --setalias. Merge syntax isn't supported when alias is used. The -i, --iface option is optional and interface can be used as parameter on the command line for selecting the used interface even without the option being explicitly used.

-L, --large

Use large fonts in output.

--limit limit

Set the maximum number of shown entries in list outputs to limit. Usage of --limit overrides the default list entry limit values and the optional limit parameter given directly for a list query. All entries stored in the database will be shown if limit is set to 0.

--locale locale

Use locale instead of using the locale setting specified in the configuration file or the system default if no configuration file is available.

-m, --months [limit]

Output traffic statistics on a monthly basis for the last months. The length of the list will be limited to 12 entries unless configured otherwise or unless the optional limit parameter is used. All entries stored in the database will be shown if limit is set to 0.

-ne, --noedge

Remove darker edges from around the image.

-nh, --noheader

Remove header containing title and update time. Time of the previous update will still be visible in the lower right corner using a less visible color.

-nl, --nolegend

Remove legend containing rx and tx color mapping information from the image.

-o, --output file

Write image to file and exit. The used image format is selected by the given file extension of file. For example, "image.png" results in the file getting written using the png image format due to the ".png" extension having been used. Usage of png image format usually results in the smallest file size without loss of detail or introduction of compression artifacts. Alternatively, output can be directed to stdout by giving "-" as file in which case png image format is used.

-ru, --rateunit [mode]

Swap the configured rate unit. If rate has been configured to be shown in bytes then rate will be shown in bits if this option is present. In the same way, if rate has been configured to be shown in bits then rate will be shown in bytes when this option is present. Alternatively, mode with either 0 or 1 can be used as parameter for this option in order to select between bytes (0) and bits (1) regardless of the configuration file setting.

--scale percent

Scale output to given percent resulting in the image being either smaller or larger than the default size.

-S, --small

Use small fonts in output.

--style number

Modify the content and style of outputs. Setting number to 3 will show average traffic rate in all outputs where it is supported. Other values will show bar graphics instead.

-s, --summary

Output traffic statistics summary.

-t, --top [limit]

Output all time top traffic days. The length of the list will be limited to 10 entries unless configured otherwise or unless the optional limit parameter is used. All entries stored in the database will be shown if limit is set to 0. When used with --begin and optionally with --end, the list will be generated using the daily data instead of separate top entries. The availability of daily data defines the boundaries the date specific query can access.

--transparent [enabled]

Toggle background color transparency depending of the TransparentBg setting in the configuration file. Alternatively, 0 or 1 can be given as parameter enabled for this option in order to either disable (0) or enable (1) transparency regardless of the configuration file setting.

-v, --version

Show current version.

-vs, --vsummary [graph]

Output traffic summary with the graph selected using the SummaryGraph setting in the configuration file below it using a vertical layout. The optional graph parameter can be used to override the configuration file setting. Available graphs: 0 = hours, 1 = 5 minutes.

-y, --years [limit]

Output traffic statistics on a yearly basis for the last years. The list will show all entries by default unless configured otherwise or unless the optional limit parameter is used. All entries stored in the database will also be shown if limit is set to 0.

-?, --help

Show a command option summary.

FILES

/var/lib/vnstat/

Default database directory.

/etc/vnstat.conf

Config file that will be used unless $HOME/.vnstatrc exists. See vnstat.conf(5) for more information.

EXAMPLES

vnstati -s -i eth0 -o /tmp/vnstat.png

Output traffic summary for interface eth0 to file /tmp/vnstat.png.

vnstati -vs -i eth0+eth1+eth2 -o /tmp/vnstat.png

Output traffic summary with hourly data under the normal summary for a merge of interfaces eth0, eth1 and eth2 to file /tmp/vnstat.png.

vnstati -h -c 15 -o /tmp/vnstat_h.png

Output hourly traffic statistics for default interface to file /tmp/vnstat_h.png if the file has not been updated within the last 15 minutes.

vnstati -d -ne -nh -o -

Output daily traffic statistics without displaying the header section and edges for default interface to standard output (stdout).

vnstati -m --config /home/me/vnstat.cfg -i -o -

Output monthly traffic statistics for default interface specified in configuration file /home/me/vnstat.cfg to standard output (stdout).

RESTRICTIONS

Using long date output formats may cause misalignment in shown columns if the length of the date exceeds the fixed size allocation.

Scaling an image when background transparency is enabled may not result in transparency being retained.

AUTHOR

SEE ALSO