NAME

aeintegratq - integrate changes into projects

SYNOPSIS

aeintegratq [ option... ] project‐name...

DESCRIPTION

The aeintegratq command is used to manage the integrations of one or more changes in one or more projects. Normally run via cron(1) or at(1) with the name of a single project, aeintegratq will manage all operations for integration even when -Build and -Test are required on multiple architectures. If a change review is revoked after the queue is running aeintegratq will notice the bad state and silently move on. If one or more changes are ended or passed after the queue is running, and -loop has been given, aeintegratq will notice the new change[s] and integrate them. Additional options allow the integrator full control over most aspects of queue management such as the order of integration of multiple changes.

OPTIONS

The following options are understood:

Option Summary

-h: Help, show usage information.
-H: Help, show usage plus all helpful comment information.
-a: run on Any machine (normally only IntegrationHost)
-s: run remote operations via ssh (default rsh)
-n: No action, just tell what would be done.
-ib s: Specify (remote) server for ibegin.
-ip s: Specify (remote) server for ipass.
-k: Keep the scripts and report files.
-K: Keep the temp file even if integration passes.
-loop: Loop to process more changes if they become available before aeintegratq completes. It will stop when there is nothing more to be done.
-M list: Minimum, run given changes -minimum
-P list: Precious, do not IFail changes in list, just stop.
-R list: Ready, specify order and subset, e.g. -R 29,45
-S stage: Pick up at given stage (diff|build|test|integrate)
-c change‐number: specify Change to integrate at Stage
-p project‐name: specify single Project name

NOTE: if custom options such as -P -R -S -c -p are given only a single project may be integrated since the options would be meaningless to the next project given.

Some options are present only for testing and investigation. Note that options are rarely required for normal operations.

Control Options

The following options are available for special needs. They control the order and disposition of each change awaiting_integration in a given project.

-R[eady] number1,number2...

This option is used to specify order or subset to integrate. Only those changes listed will be attempted, and in exactly the order given. This applies to queue looping if -loop is given. In particular note unless the list includes future changes, future loops will not integrate them.

Useful if a particular change must go in before another for some reason. Or if only integrating one or two changes when several are awaiting_integration in the given project. A single change may also be specified with the -c[hange] number option, which is common for other aegis commands. However the -R option allows a list and if given will override any -c given.

-P[recious] number1,number2...
-P[recious] all

This option is used to specify that a particular change or subset of changes should be considered precious. It neither implies order nor limits the queue run to that subset; it only means that the changes should be considered precious. Note that at least one number (or the keyword all) must be given.

The concept of precious means that if the given change were to fail anywhere in the integration process, then the process simply stops and leaves the problem change in the delta directory. The -IFail would not actually be executed. This is sometimes useful to diagnose a problem which only occurs during integrations. It is also useful if the failure is due to a transient problem such as unreliable machines on the network. In such a case the integration can be resumed after fixing the problem. See the stage options below.

If, on the other hand, a precious change makes it through the integration process successfully, the option has no effect.

-M[inimum] number1,number2... or all: Integrate the given change[s] with the -minimum option. Such changes will be put on the end of the queue so that the last integrations of a run will be a minimum. This feature allows practical use of minimum integrations without requiring -minimum on each and every integration. See the section below on Minimum integrations for more information. If -loop is given any change[s] specified as minimum will run at the end of the loop in which they are ready, they will not be pushed to the final loop.
-ib[server] server‐name or ""
-ip[server] server‐name or "": To specify a remote server on which to run -ibegin or 0fP respecively. These options are rarely needed, but may be useful if a project is hosted on a different file server and has a large baseline. By having the -ibegin run on that server the network traffic would be greatly reduced and for large projects and/or slow networks can greatly reduce the time required for -ibegin. The option form of giving an empty name depends on the output of df -k giving a parseable host name. If that is not true on your integration host architecture, you will have to specify the server name.
-display display‐value or "": To specify a valid X display for use during integration operations.

Stage Options

The following options allow [re]starting an integration which has already progressed through some stages. This is useful to deal with failed (precious) integrations, or to finish automatically an integration begun by hand.

-S[tage] diff
-S[tage] build
-S[tage] test
-S[tage] integrate: Pick up the integration at the given stage. Requires -c[hange] number option to specify the change number.

Advanced Controls

The integrator may provide for special situations such as operations required after -Build and before -Test, or at the end of a queue run. Such capabilities are provided by hooks and strategies described below.

Hooks

There are a set of hooks available which are run, if present, before and after each stage of the integration. They can be used to help ensure that the integrator actually gets some sleep while managing large projects.

These hooks are searched for in the directory $HOME/integration_hooks. None need exist; aeintegratq will only pay attention to any that do exist. Hooks may be any form of executable (script, etc) and are called with 2 arguments: project‐name change‐number. They run as the integrator on the machine from which aeintegratq was started. They are named using the project name along with a suffix according to what place in the integration process you want them to run.

Note that if a hook for project foo exists it is also used for any branches under that project. For example, if you have provided foo.pre_ip, it will be run for foo.1 and foo.1.0 as well. If for some reason you want different (or no) action for project foo.1.0, then you would provide foo.1.0.pre_ip which does what you wish, including nothing, effectively overriding foo.pre_ip.

Here is how to map particular places in the integration process to hook suffixes.

run at time	extension
before attempting -Integrate_Begin	.pre_ib
after -Integrate_Begin completes	.ib
before attempting -Diff	.pre_d
after -Diff completes	.d
before attempting -Build	.pre_b
after -Build completes	.b
before attempting -Build on <arch>	.pre_<arch>b
after -Build on <arch> completes	.<arch>b
before attempting -Test	.pre_t
after -Test completes	.t
before attempting -IPass	.pre_ip
after -IPass completes	.ip
before attempting -IFail	.pre_if
after -IFail completes	.if

The hook program should exit with 0 if successful or 1 if not. A non‐zero exit causes the change being integrated to fail immediately unless it was marked precious.

Note that in most cases anything done via an .ip hook should probably be done instead by the ipass_notify command in the project attributes file (see aepattr(5) for more information), or the build_time_adjust_notify_command in the project configuration file (see aepconf(5) for more information), but the hook can provide a temporary way to keep going until the permanent solution can be implemented.

In addition two special hooks, aeintegratq.end and aeintegratq.fail, are recognized. They are called when aeintegratq finishes a queue run. They are called with 2 arguments like any other hook (project‐name change‐number) although both the project‐name and change‐number given are of the last change integrated and may be less than useful.

The .end hook is called if/when the queue run is finished and was successful. Note that this does not mean that no changes failed, only that no queue errors occurred. This hook might be used to invoke another queue run on a different project/branch, or possibly even on the same project, if other changes may have been ended and/or reviewed while the first run was in progress, see also the -loop option. These conditions arise quite often with flex time engineers. Another use of the .end hook is to automatically build a new package using the newly integrated project as source.

If queue errors were encountered, or a change failed that was marked precious, then the .fail hook is called. An obvious use of that hook would be an e‐mailed page to the integrator.

Strategy or Oops‐retry

Sometimes a persistent build problem will plague integrations. This can be very annoying if it ruins an overnight run, especially if the cure is simple when it happens. Examples of this can be timeouts due to a busy data server or other transient errors. Note that this applies only to -Build related problems.

To deal with such problems the integrator may provide a strategy script specific to a project. An executable program should be found in $HOME/strategy.<project_name>. The program will be run as the integrator with the delta directory as current directory. The program may do any commands necessary to clean up and/or diagnose the error. If the script finds the problem to be transient and fix‐able, it exits successfully (with 0 status) and aeintegratq will re‐launch the -Build and log the re‐try. Otherwise the script should exit with a 1 and the change will fail.

Multi‐Architecture integrations

For projects which build and test on multiple architectures, aeintegratq requires arch_hosts be installed and have available at least one machine of each architecture required. This is also true if the host from which aeintegratq is run is of a different architecture from the target architecture of the project being integrated.

If you wish to take advantage of multiple architecture automatic integrations, you can install arch_hosts or provide a more simple script which will return a machine name according to architecture and job type.

Minimum integrations

provides a minimum integration capability which may be used for various reasons. The term minimum may be a bit counter intuitive. One might think it means to do the minimum amount of work, however it actually means use a minimum of files from the baseline in populating the delta directory. Since no constructed files are put in the delta directory, this normally leads to actually building everything in the project from sources and, as such, might be considered the most robust of builds.

Note that any change which removes a file, whether by aerm or aemv, results in an implicit minimum integration. This is intended to ensure nothing in the project references the removed file.

A project may adopt a policy that a product release should be based on a minimum integration. Such a policy may be a reflection of local confidence, or lack thereof, in the project's DMT (Dependency Maintenance Tool) or build system. Or it may be based on a validation process wishing to make a simple statement on how the released package was produced.

Another, more transient, reason a to require a minimum integration might be when upgrading a third party library, compiler or maybe even OS level. Any of these events would signal the need for a minimum integration to ensure everything is rebuilt using the new resources. This can be done with minimum overhead using the -M option as described above.

The cost of a minimum integration varies according to type and size of the project. For very large projects, especially those building large numbers of binaries, the cost can be large. However large projects also require significant time to fully populate the delta directory. A minimum integration only copies those files under aegis control, skipping all “produced” files. In the case where a file upon which everything depends is changed, everything will be built anyway so the copy of the already built files is a waste of time. This means that sometimes a minimum can be as cheap as a normal integration.

Manual Tests

allows tests to be defined as manual which may be necessary if the test requires human interaction or some transient resource. Such tests can be problematic for automatic integrations and generally must have some means to pass without running during integrations. For this, and other, reasons most sites seek to avoid manual tests. There are a number of ways to code a test such that it will pass automatically during integrations. Just one example for shell script tests might be:

CSTATE=`aesub -p $AEGIS_PROJECT -c $AEGIS_CHANGE '${state}'`
if [ "$CSTATE" = "being_integrated" ]
then echo "`basename $0` passes during integration" exit 0
fi

Optional Support Programs

There are some programs which aeintegratq will use if they are installed.

• arch_hosts was mentioned previously. It is optional only if your projects and your file server are of a single architecture.

• aelogres may enhance the information provided in -IFail entries. Normally all you get is the last 10 lines of the log file, which is not bad if tests fail, but can be terrible for failed builds. If you provide a program named aelogres which knows how to extract a better succinct report of problems, the output of that program will be used instead of the simple tail. It is called with a -i option.

• sound_all_machines, if available, will be called when integrations either pass or fail. It can be helpful to announce the fact that an integration has finished. If it passed, developers will probably want to do an aed to bring their changes up to date. The audio announcement provides another timely hint.

The sound files are searched for in the /usr/local/com/sounds directory. They will have endings of _pass and _fail according to the results of a given attempt. Two sound files are required: integration_pass and integration_fail. Others will be used if provided to customize the sounds so that each developer may have one or more personal sounds. If a file named <developer>_pass is located, it will be used. If a set of files exist named <developer_pass.[0‐9] they will be used in random sequence. The same search rule applies to _fail sets. The sound_all_machines program may use a host list and play the sound file on each machine or, assuming that other audio capabilities exist, might do any form of announcement desired.

EXIT STATUS

The aeintegratq command will exit with a status of 1 on any error. The aeintegratq command will only exit with a status of 0 if there are no errors.

ENVIRONMENT VARIABLES

See aegis(1) for a list of environment variables which may affect this command. See aepconf(5) for the project configuration file's project_specific field for how to set environment variables for all commands executed by Aegis.

FILES

Control files are searched for in the $HOME directory. They are named strategy.<project>, They need not exist if no special action is necessary.

The hook scripts are searched for in the $HOME/integration_hooks directory. They are named <project>.<stage>. Also aeintegratq.end and aeintegratq.fail. These hooks also need not exist if no special action is desired.

COPYRIGHT

The aeintegratq program comes with ABSOLUTELY NO WARRANTY; This is free software and you are welcome to redistribute it under certain conditions;