GENERAL

--help

displays usage information.

--version

displays version and copyright information.

--monitor [delay|once]

continually updates phone status to stderr. Optional delay parameter sets the refresh interval to delay seconds. Default is 1. once means the output will be printed only once.

--shell

runs interactive session that will allow to run sequent gnokii commands without a need to reconnect for the sequent commands.

DIALING

--getspeeddial location

reads speed dial from the specified location.

--setspeeddial number memory_type location

specify speed dial. location number 1 is usually reserved for voice mailbox number and it is unavailable as speed dial.

--dialvoice number

initiate voice call. On success print the callid identifier to be used with the --hangup command. The --monitor command can be used to show the callid.

With model = AT direct dialing from phonebooks is supported with careful use of shell quoting, for example: gnokii --dialvoice ">SM42" # dial the number in location 42 of SM memory gnokii --dialvoice '>"Home"' # dial the number if string matches exactly a contact name (note the use of single and double quotes)

--senddtmf string

send DTMF sequence.

--answercall callid

answer an incoming call. callid is a small integer number used to identify one of the incoming calls. The --monitor command can be used to show the callid.

--hangup callid

hangup an incoming call or an already established call. callid is a small integer number used to identify one of the incoming calls. If you initiated the call with --dialvoice this is the number printed by that command. The --monitor command can be used to show the callid.

--divert {--op|-o} {register|enable|query|disable|erasure} {--type|-t} {all|busy|noans|outofreach|notavail} {--call|-c} {all|voice|fax|data} [{--timeout|-m} time_in_seconds] [{--number|-n} number]

Manage call diverting/forwarding.

--op specifies one of the operations: register enable query disable erasure

--type specifies one of the event types: busy noans outofreach notavail unconditional all

--call specifies one of the call types: voice fax data all

--timeout is the number of seconds an incoming call will ring before being forwarded to the registered number (use with --type noans)

--number is the phone number to which calls are to be forwarded

PHONE SETTINGS

--getdisplaystatus

shows what icons are displayed.

--displayoutput

show texts displayed in phone's screen.

--getprofile [number]

show settings for selected(all) profile(s).

--setprofile

sets settings for selected(all) profile(s).

--getactiveprofile

reads the active profile.

--setactiveprofile profile_no

sets active profile to the profile number profile_no.

--netmonitor {reset|off|field|devel|next|nr}

setting/querying netmonitor mode.

--reset [soft|hard]

resets the phone. By default a soft reset is performed. Depending on phone, the hard option also deletes everything in the internal memory and restores the factory settings.

TODO

--gettodo start_number [end_number|end] [-v|--vCal]

get the notes with numbers from start_number to end_number from ToDo list. end is a keyword that denotes 'everything till the end'.

-v | --vCal - output in vCalendar 1.0 format

--writetodo vcalfile start_number [end_number|end]

write the notes with numbers from start_number to end_number from vCalendar file vcalfile to ToDo list. More than one note a time can be saved. end is a keyword that denotes 'everything till the end'.

number - location of the note in the vCalendar file

--deletealltodos

delete all notes from the ToDo list.

CALENDAR

--getcalendarnote start_number [end_number|end] [-v|--vCal]

get the notes with numbers from start_number to end_number from calendar. end is a keyword that denotes 'everything till the end'.

-v | --vCal - output in vCalendar 1.0 format

--writecalendarnote vcalfile start_number [end_number|end]

write the notes with numbers from start_number to end_number from vCalendar file vcalfile to a phone calendar. More than one note a time can be saved. end is a keyword that denotes 'everything till the end'.

number - location of the note in the vCalendar file

--deletecalendarnote start_number [end_number|end]

delete the notes with numbers from start_number to end_number from calendar. end is a keyword that denotes 'everything till the end'.

SMS

--getsms memory_type start [end] [-f|--file file] [-F|--force-file file] [-a|--append-file file] [-d|--delete]

gets SMS messages from specified memory type starting at entry start and ending at end and print them to stdout by default. end can be a number or the string 'end'. If end is not specified only one location - start is read.

For the memory types you usually use IN (Inbox) and OU (Outbox) for Nokias and SM (SIM card) and ME (phone memory) for other brands, except for modern Motorolas that prefer MT (combined SIM and phone memory); in any case the --showsmsfolderstatus command shows the list of memory types available in your phone with their descriptions and message counts (each part of multipart messages is counted separately).

-f | --file file - save messages to file in mbox format. If file already exists, user is prompted whether to overwrite it

-F | --force-file file - save messages to file in mbox format. If file already exists, it is overwritten without asking

-a | --append-file file - save messages to file in mbox format. If file already exists, messages are added to the end

-d | --delete - delete message after reading.

--deletesms memory_type start [end]

deletes SMS messages from specified memory type starting at entry start and ending at end. If end is not specified only one location - start is deleted.

--sendsms destination [--smsc message_center_number | --smscno message_center_index] [-r|--report] [-8|--8bit] [-C|--class n] [-v|--validity n] [-i|--imelody] [-a|--animation file;file;file;file] [-o|--concat this;total;serial] [-w|--wappush url]

sends an SMS message to destination via message_center_number or SMSC number taken from phone memory from address message_center_index. If this argument is omitted SMSC number is taken from phone memory from location 1. Message text is taken from STDIN. Meaning of other optional parameters:

-r | --report - request for delivery report

-8 | --8bit - set 8bit coding

-C | --class n - Class Message n, where n can be 0..3

-v | --validity n - validity in minutes

-i | --imelody - send iMelody within SMS

-a | --animation file;file;file;file - send animation message

-o | --concat this;total;serial - send this part of all total parts identified by serial

-w | --wappush url - send wappush to the given url

Sample usage:

echo "This is a test message" | gnokii --sendsms +48501123456 -r

--savesms [--sender from] [--smsc message_center_number | --smscno message_center_index] [--folder folder_id] [--location number] [--sent | --read] [--deliver] [--datetime YYMMDDHHMMSS]

saves SMS messages to phone. Messages are read from STDIN. You can specify the following optional arguments:

--sender - set the sender number (only --deliver)

--smsc message_center_number - set the SMSC number (only --deliver)

--smscno message_center_index - SMSC number taken from phone memory from address message_center_index (only --deliver)

--folder folder_id - folder ID where to save the SMS to (only valid for newer phones, i.e. 6210/6510 series). For legal values see --getsms.

--location number - save the message to location number

--sent | --read - mark the message saved/read depending on --deliver

--deliver - set the message type to SMS_Deliver

--datetime YYMMDDHHMMSS - sets datetime of delivery, i.e. 031123185713 would set message delivery time to 23rd November 2003, 6:57:13 PM

--getsmsc [start_number [end_number]] [-r|--raw]

show the SMSC parameters from specified location(s) or for all locations.

-r | --raw - output in a format suitable for --setsmsc

--setsmsc

set SMSC parameters read from STDIN. See --raw output of --getsmsc for syntax.

--createsmsfolder name

create SMS folder with name name.

--deletesmsfolder number

delete folder # number of 'My Folders'.

--showsmsfolderstatus

list SMS folder names with memory types and total number of messages available.

--smsreader

keeps reading incoming SMS and saves them into the mailbox.

MMS

--getmms memory_type start [end] [{--pdu|--raw} file] [-o|--overwrite]

gets MMS messages from specified memory type starting at entry start and ending at end. Default output format is human readable, alternative output formats are --pdu which is the binary format of MMS as received by the phone from the network and --raw which saves the data as read from the phone.

When the -o or --overwrite option is used, existing files are overwritten without asking.

--deletemms memory_type start [end]

deletes MMS messages from specified memory type starting at entry start and ending at end. If end is not specified only one location - start is deleted.

LOGOS

--sendlogo {caller|op|picture} destination logofile [network_code]

send the logofile to destination as operator or CLI logo.

--setlogo op [logofile [network_code]]

--setlogo startup [logofile]

--setlogo caller [logofile [caller_group_number [group_name]]]

set or clear operator, startup or caller logo.

--setlogo {dealer|text} [text]

set or clear welcome note.

--getlogo op [logofile [network_code]]

--getlogo startup [logofile [network_code]]

--getlogo caller [caller_group_number [logofile [network_code]]]

get operator, startup or caller logo.

--getlogo {dealer|text}

get welcome note.

--viewlogo logofile

print the logofile as ASCII art. Formats that are automatically detected are: NOL, NGG, NSM, NLM, BMP, I61, GGP, XPM. The OTA format can be used only if the filename ends with the .otb extension.

Format of network_code parameter is 3 digits MCC, a space, 2 digits MNC surrounded by single or double quotes, eg. "123 45".

RINGTONES

--sendringtone destination rtttlfile

send the rtttlfile to destination as ringtone.

--setringtone rtttlfile

set the rtttlfile as ringtone (on 6110).

PHONEBOOK

--getphonebook memory_type start_number [end_number|end] [[-r|--raw]|[-v|--vcard]|[-l|--ldif]]

reads specified memory location from phone. If end_number is not specified only one location - start is read. If instead of end_number the text end is specified then gnokii will read from start_number until it encounters a non-existant location. Valid memory types are ME, SM, FD, ON, EN, DC, RC, MC, LD:

ME Internal memory of the mobile equipment

SM SIM card memory

FD Fixed dial numbers

ON Own numbers

EN Emergency numbers

DC Dialled numbers

RC Received calls

MC Missed calls

LD Last dialed numbers

Normally you get human readable output. Please note, that it is not compatible with expected input by --writephonebook. You can use -v or --vcard switch to get output in vCard format or -l or --ldif switch to get output in ldif format or -r or --raw switch to get the raw output which is explained below. You can use it then with --writephonebook.

--writephonebook [-o|--overwrite] [-f|--find-free] [-m|--memory-type|--memory memory_type] [-n|--memory-location|--location number] [[-v|--vcard]|[-l|--ldif]]

reads data from stdin and writes to phonebook. Uses the format as provided by the output of the getphonebook command using --raw or --vcard or --ldif. Default is raw format (see below for details) and alternate formats are vCard and ldif. Default --getphonebook output format is not compatible with --writephonebook.

With --memory-type memory_type and --memory-location number you can set a memory type and a location if the input data doesn't specify them.

When the -o or --overwrite option is used, existing entries at a given location are overwritten.

When the -f or --find-free option is given, gnokii tries to find a free location. In this case, you can omit the location field in the input data.

The raw phonebook format is very simple. Each line represents one entry. Fields are separated by semicolons. Semicolons aren't allowed inside a field. The fields have to be in this order (the subentries are optional, ie. you can repeat all subentry field multiple times, but they have to be alltogether in the given order):

name

number

memory_type

entry_location

caller_group_number

subentry_type

subentry_number_type

subentry_id

subentry_text

Possible values of caller_group_number and the corresponding caller groups are (these are defaults, you are able to change these manually in your phone):

0 Family

1 VIP

2 Friends

3 Colleagues

4 Other

5 No group

Possible subentry types are described in the gnokii/common.h file:

7 subentry is the name

8 subentry is the email address

9 subentry is the postal address (snail mail)

10 subentry is the note (text field)

11 subentry is the number

12 subentry is the ringtone

19 subentry is the date (used for DC, RD, LD)

26 subentry is the pointer (pointer to the other memory)

27 subentry is the logo (bitmap)

28 subentry is the logo switch

30 subentry is the group (octect)

44 subentry is the URL

47 subentry is the location (octect)

51 subentry is the image (file id)

55 subentry is the ringtoneadv (file id or ringtone)

56 subentry is the userid

63 subentry is the pttaddress

67 subentry is the extgroup

69 subentry is the video (file id)

70 subentry is the firstname

71 subentry is the lastname

74 subentry is the postaladdress

75 subentry is the extendedaddress

76 subentry is the street

77 subentry is the city

78 subentry is the stateprovince

79 subentry is the zipcode

50 subentry is the country

82 subentry is the formalname

84 subentry is the jobtitle

85 subentry is the company

86 subentry is the nickname

87 subentry is the birthday

Possible subentry number types are described in the gnokii/common.h file:

2 number is the home phone number

3 number is the mobile phone number

4 number is the fax number

6 number is the work phone number

10 number is the general number

For the subentry types that don't care about number type (as text files) this should be set to 0.

--deletephonebook memory_type start_number [end_number|end]

delete entries with start_number to end_number from the phone book in memory_type. end is a keyword that denotes 'everything till the end'.

WAP

--getwapbookmark number

reads the specified WAP bookmark from phone

--writewapbookmark name URL

write WAP bookmark to phone

--deletewapbookmark number

delete WAP bookmark from phone

--getwapsetting number [-r|--raw]

read WAP setting from phone

--writewapsetting

reads data from stdin and writes it to phone. Hint: see syntax from --getwapsetting -r option

--activatewapsetting number

activate WAP setting number

DATE, TIME AND ALARM

--setdatetime [YYYY [MM [DD [HH [MM]]]]]

set the date and the time of the phone.

--getdatetime

shows current date and time in the phone.

--setalarm HH MM

set the alarm of the phone.

--getalarm

shows current alarm.

SECURITY

--identify

get IMEI, manufacturer, model, product name and revision.

--entersecuritycode {PIN|PIN2|PUK|PUK2|SEC}

asks for the code and sends it to the phone. Code is read from terminal or from stdin.

--getsecuritycode

shows the currently set security code.

--getsecuritycodestatus

show if a security code is needed.

--getlocksinfo

show information about the (sim)locks of the phone: the lock data, whether a lock is open or closed, whether it is a user or factory lock and the number of unlock attempts.

FILE

--getfilelist remote_path

lists files from the given directory. Use A:\* or B:\* to get the root directory from either phone memory or card memory.

--getfiledetailsbyid [id]

lists file details or directory contents from the entry identified by id. If no identifier is given, list the root directory contents.

--getfileid remote_filename

gets id of the file.

--getfile remote_filename [local_filename]

gets file identified by name and path from the phone and stores it at the local computer.

--getfilebyid id [local_filename]

gets file identified by id from the phone and stores it at the local computer.

--getallfiles remote_path

gets all files from the remote path.

--putfile local_filename remote_filename

stores the file in the phone memory or on the memory card.

--deletefile remote_filename

removes the file from the phone.

--deletefilebyid id

removes the file from the phone.

MISC

--keysequence

emulates pressing keys on phone keyboard. Input is read from stdin.

Supported keys (any other char is ignored):