NAME

SYNOPSIS

INHERITANCE

STANDARD OPTIONS

background  font              selectBackground    cursor
foreground  selectForeground  disabledForeground  height
width

See the "options" manual entry for details on the standard options.

WIDGET-SPECIFIC OPTIONS

Name:	angle
Class:	Angle
Command-Line Switch:	-angle

Specifes the angle of slope from the inner edge to the outer edge of the tab. An angle of 0 specifies square tabs. Valid ranges are 0 to 45 degrees inclusive. Default is 15 degrees. If tabPos is e or w, this option is ignored.

Name:	backdrop
Class:	Backdrop
Command-Line Switch:	-backdrop

Specifies a background color to use when filling in the area behind the tabs.

Name:	bevelAmount
Class:	BevelAmount
Command-Line Switch:	-bevelamount

Specifes the size of tab corners. A value of 0 with angle set to 0 results in square tabs. A bevelAmount of 4, means that the tab will be drawn with angled corners that cut in 4 pixels from the edge of the tab. The default is 0.

Name:	command
Class:	Command
Command-Line Switch:	-command
Specifes the prefix of a Tcl command to invoke to change the view in the 
widget associated with the tabset. When a user selects a tab, a Tcl command 
is invoked. The actual command consists of this option followed by a space 
and a number. The number is the numerical index of the tab that has been 
selected.

Name:	equalTabs
Class:	EqualTabs
Command-Line Switch:	-equaltabs

Specifies whether to force tabs to be equal sized or not. A value of true means constrain tabs to be equal sized. A value of false allows each tab to size based on the text label size. The value may have any of the forms accepted by the Tcl_GetBoolean, such as true, false, 0, 1, yes, or no.

For horizontally positioned tabs (tabPos is either s or n), true forces all tabs to be equal width (the width being equal to the longest label plus any padX specified). Horizontal tabs are always equal in height.

For vertically positioned tabs (tabPos is either w or e), true forces all tabs to be equal height (the height being equal to the height of the label with the largest font). Vertically oriented tabs are always equal in width.

Name:	gap
Class:	Gap
Command-Line Switch:	-gap

Specifies the amount of pixel space to place between each tab. Value may be any pixel offset value. In addition, a special keyword overlap can be used as the value to achieve a standard overlap of tabs. This value may have any of the forms acceptable to Tk_GetPixels.

Name:	margin
Class:	Margin
Command-Line Switch:	-margin

Specifies the amount of space to place between the outside edge of the tabset and the outside edge of its tabs. If tabPos is s, this is the amount of space between the bottom edge of the tabset and the bottom edge of the set of tabs. If tabPos is n, this is the amount of space between the top edge of the tabset and the top edge of the set of tabs. If tabPos is e, this is the amount of space between the right edge of the tabset and the right edge of the set of tabs. If tabPos is w, this is the amount of space between the left edge of the tabset and the left edge of the set of tabs. This value may have any of the forms acceptable to Tk_GetPixels.

Name:	padX
Class:	PadX
Command-Line Switch:	-padx

Specifies a non-negative value indicating how much extra space to request for a tab around its label in the X-direction. When computing how large a window it needs, the tab will add this amount to the width it would normally need The tab will end up with extra internal space to the left and right of its text label. This value may have any of the forms acceptable to Tk_GetPixels.

Name:	padY
Class:	PadY
Command-Line Switch:	-pady

Specifies a non-negative value indicating how much extra space to request for a tab around its label in the Y-direction. When computing how large a window it needs, the tab will add this amount to the height it would normally need The tab will end up with extra internal space to the top and bottom of its text label. This value may have any of the forms acceptable to Tk_GetPixels.

Name:	raiseSelect
Class:	RaiseSelect
Command-Line Switch:	-raiseselect

Specifes whether to slightly raise the selected tab from the rest of the tabs. The selected tab is drawn 2 pixels closer to the outside edge of the tabset than the unselected tabs. A value of true says to raise selected tabs, a value of false turns this off. The default is false. The value may have any of the forms accepted by the Tcl_GetBoolean, such as true, false, 0, 1, yes, or no.

Name:	start
Class:	Start
Command-Line Switch:	-start

Specifies the amount of space to place between the left or top edge of the tabset and the starting edge of its tabs. For horizontally positioned tabs, this is the amount of space between the left edge of the tabset and the left edge of the first tab. For vertically positioned tabs, this is the amount of space between the top of the tabset and the top of the first tab. This value may change if the user performs a MButton-2 scroll on the tabs. This value may have any of the forms acceptable to Tk_GetPixels.

Name:	state
Class:	State
Command-Line Switch:	-state

Sets the active state of the tabset. Specifying normal allows all tabs to be selectable. Specifying disabled disables the tabset causing all tabs to be drawn in the disabledForeground color.

Name:	tabBorders
Class:	TabBorders
Command-Line Switch:	-tabborders

Specifies whether to draw the borders of tabs that are not selected. Specifying true (the default) draws these borders, specifying false draws only the border around the selected tab. The value may have any of the forms accepted by the Tcl_GetBoolean, such as true, false, 0, 1, yes, or no.

Name:	tabPos
Class:	TabPos
Command-Line Switch:	-tabpos

Specifies the location of the set of tabs in relation to another widget. Must be n, s, e, or w. Defaults to s. North tabs open downward, South tabs open upward. West tabs open to the right, east tabs open to the left.

DESCRIPTION

A tabset is a widget that contains a set of Tab buttons. It displays these tabs in a row or column depending on it tabpos. When a tab is clicked on, it becomes the only tab in the tab set that is selected. All other tabs are deselected. The Tcl command prefix associated with this tab (through the command tab configure option) is invoked with the tab index number appended to its argument list. This allows the tabset to control another widget such as a Notebook.

TABS

Tabs can be controlled in their location along the edges, the angle that tab sides are drawn with, gap between tabs, starting margin of tabs, internal padding around labels in a tab, the font, and its text or bitmap.

WIDGET-SPECIFIC METHODS

pathName option ?arg arg ...?

option and the args determine the exact behavior of the command.

Many of the widget commands for a tabset take as one argument an indicator of which tab of the tabset to operate on. These indicators are called indexes and may be specified in any of the following forms:

number

Specifies the tab numerically, where 0 corresponds to the first tab in the tab set, 1 to the second, and so on.

select

Specifies the currently selected tab's index. If no tab is currently selected, the value -1 is returned.

end

Specifes the last tab in the tabset's index. If the tabset is empty this will return -1.

pattern

If the index doesn't satisfy any of the above forms, then this form is used. Pattern is pattern-matched against the label of each tab in the tabset, in order from the first to the last tab, until a matching entry is found. The rules of Tcl_StringMatch are used.

The following commands are possible for tabset widgets:

EXAMPLE

package require Iwidgets 4.0
# Define a proc that knows how to select an item 
# from a list given an index from the tabset -command callback.
  proc selectItem { item } {
    .l selection clear [.l curselection]
    .l selection set $item
    .l see $item
}
    

# Define a proc that knows how to select a tab 
# given a y pixel coordinate from the list..
  proc selectTab { y } {
    set whichItem [.l nearest $y]
    .ts select $whichItem
}
    

# Create a listbox with two items (one and two) 
# and bind button 1 press to the selectTab procedure.
  listbox .l -selectmode single -exportselection false
  .l insert end one
  .l insert end two
  .l selection set 0
  pack .l
  bind .l <ButtonPress-1> { selectTab %y }
    

# Create a tabset, set its -command to call selectItem
# Add two labels to the tabset (one and two).
  iwidgets::tabset .ts -command selectItem
  .ts add -label 1
  .ts add -label 2
  .ts select 0
  pack .ts -fill x -expand no
    

AUTHOR

KEYWORDS