GSP
Quick Navigator
Search Site

Unix VPS
A - Starter
B - Basic
C - Preferred
D - Commercial
MPS - Dedicated
Previous VPSs
* Sign Up! *

Support
Contact Us
Online Help
Handbooks
Domain Status
Man Pages

FAQ
Virtual Servers
Pricing
Billing
Technical

Network
Facilities
Connectivity
Topology Map

Miscellaneous
Server Agreement
Year 2038
Credits
 

USA Flag

 

 

Man Pages
tpm2_pcrread(1) General Commands Manual tpm2_pcrread(1)

tpm2_pcrread(1) - List PCR values.

tpm2_pcrread [OPTIONS] PCR_LIST_OR_ALG

tpm2_pcrread(1) - Displays PCR values. Without any arguments, tpm2_pcrread(1) outputs all PCRs and their hash banks. One can use specify the hash algorithm or a pcr list as an argument to filter the output.

To only output PCR banks with a given algorithm, specify the hashing algorithm as the argument. Algorithms should follow the “formatting standards”, see section “Algorithm Specifiers”. Also, see section “Supported Hash Algorithms” for a list of supported hash algorithms.

To output a list of PCR banks (sha1, sha256, etc) and ids (0, 1, 2 etc) specify a PCR selection list as the argument as specified via section “PCR Bank Specifiers”.

Also read NOTES section below.

Output is written in a YAML format to stdout, with each algorithm followed by a PCR index and its value. As a simple example assume just sha1 and sha256 support and only 1 PCR. The output would be:


$ tpm2_pcrread sha1:0+sha256:0
sha1 :
  0  : 0000000000000000000000000000000000000003
sha256 :
  0  : 0000000000000000000000000000000000000000000000000000000000000003

•
-o, --output=FILE:

The output file to write the PCR values in binary format, optional.

•
-F, --pcrs_format=FORMAT:

Format selection for the binary blob in the PCR output file. `values' will output a binary blob of the PCR values. `serialized' will output a binary blob of the PCR values in the form of serialized data structure in little endian format. Optional. Default is `values'.

This collection of options are common to many programs and provide information that many users may expect.
•
-h, --help=[man|no-man]: Display the tools manpage. By default, it attempts to invoke the manpager for the tool, however, on failure will output a short tool summary. This is the same behavior if the “man” option argument is specified, however if explicit “man” is requested, the tool will provide errors from man on stderr. If the “no-man” option if specified, or the manpager fails, the short options will be output to stdout.

To successfully use the manpages feature requires the manpages to be installed or on MANPATH, See man(1) for more details.

•
-v, --version: Display version information for this tool, supported tctis and exit.
•
-V, --verbose: Increase the information that the tool prints to the console during its execution. When using this option the file and line number are printed.
•
-Q, --quiet: Silence normal tool output to stdout.
•
-Z, --enable-errata: Enable the application of errata fixups. Useful if an errata fixup needs to be applied to commands sent to the TPM. Defining the environment TPM2TOOLS_ENABLE_ERRATA is equivalent.

The TCTI or “Transmission Interface” is the communication mechanism with the TPM. TCTIs can be changed for communication with TPMs across different mediums.

To control the TCTI, the tools respect:

1.
The command line option -T or --tcti
2.
The environment variable: TPM2TOOLS_TCTI.

Note: The command line option always overrides the environment variable.

The current known TCTIs are:

•
tabrmd - The resource manager, called tabrmd (https://github.com/tpm2-software/tpm2-abrmd). Note that tabrmd and abrmd as a tcti name are synonymous.
•
mssim - Typically used for communicating to the TPM software simulator.
•
device - Used when talking directly to a TPM device file.
•
none - Do not initalize a connection with the TPM. Some tools allow for off-tpm options and thus support not using a TCTI. Tools that do not support it will error when attempted to be used without a TCTI connection. Does not support ANY options and MUST BE presented as the exact text of “none”.

The arguments to either the command line option or the environment variable are in the form:

<tcti-name>:<tcti-option-config>

Specifying an empty string for either the <tcti-name> or <tcti-option-config> results in the default being used for that portion respectively.

When a TCTI is not specified, the default TCTI is searched for using dlopen(3) semantics. The tools will search for tabrmd, device and mssim TCTIs IN THAT ORDER and USE THE FIRST ONE FOUND. You can query what TCTI will be chosen as the default by using the -v option to print the version information. The “default-tcti” key-value pair will indicate which of the aforementioned TCTIs is the default.

Any TCTI that implements the dynamic TCTI interface can be loaded. The tools internally use dlopen(3), and the raw tcti-name value is used for the lookup. Thus, this could be a path to the shared library, or a library name as understood by dlopen(3) semantics.

This collection of options are used to configure the various known TCTI modules available:
•
device: For the device TCTI, the TPM character device file for use by the device TCTI can be specified. The default is /dev/tpm0.

Example: -T device:/dev/tpm0 or export TPM2TOOLS_TCTI=“device:/dev/tpm0”

•
mssim: For the mssim TCTI, the domain name or IP address and port number used by the simulator can be specified. The default are 127.0.0.1 and 2321.

Example: -T mssim:host=localhost,port=2321 or export TPM2TOOLS_TCTI=“mssim:host=localhost,port=2321”

•
abrmd: For the abrmd TCTI, the configuration string format is a series of simple key value pairs separated by a `,' character. Each key and value string are separated by a `=' character.
•
TCTI abrmd supports two keys:
1.
`bus_name' : The name of the tabrmd service on the bus (a string).
2.
`bus_type' : The type of the dbus instance (a string) limited to `session' and `system'.

Specify the tabrmd tcti name and a config string of bus_name=com.example.FooBar:


\--tcti=tabrmd:bus_name=com.example.FooBar

Specify the default (abrmd) tcti and a config string of bus_type=session:


\--tcti:bus_type=session

NOTE: abrmd and tabrmd are synonymous.

PCR bank specifiers (common/pcr.md)

Supported hash algorithms are:
•
0x4 or sha1 for TPM_ALG_SHA1
•
0xB or sha256 for TPM_ALG_SHA256 (default)
•
0xC or sha384 for TPM_ALG_SHA384
•
0xD or sha512 for TPM_ALG_SHA512
•
0x12 or sm3_256 for TPM_ALG_SM3_256

NOTE: Your TPM may not support all algorithms.

Options that take algorithms support “nice-names”.

There are two major algorithm specification string classes, simple and complex. Only certain algorithms will be accepted by the TPM, based on usage and conditions.

These are strings with no additional specification data. When creating objects, non-specified portions of an object are assumed to defaults. You can find the list of known “Simple Specifiers Below”.

•
rsa
•
ecc

•
aes
•
camellia

•
sha1
•
sha256
•
sha384
•
sha512
•
sm3_256
•
sha3_256
•
sha3_384
•
sha3_512

•
hmac
•
xor

•
rsassa
•
rsapss
•
ecdsa
•
ecdaa
•
ecschnorr

•
oaep
•
rsaes
•
ecdh

•
ctr
•
ofb
•
cbc
•
cfb
•
ecb

•
null

Objects, when specified for creation by the TPM, have numerous algorithms to populate in the public data. Things like type, scheme and asymmetric details, key size, etc. Below is the general format for specifying this data: <type>:<scheme>:<symmetric-details>

This portion of the complex algorithm specifier is required. The remaining scheme and symmetric details will default based on the type specified and the type of the object being created.
•
aes - Default AES: aes128
•
aes128<mode> - 128 bit AES with optional mode (ctr|ofb|cbc|cfb|ecb). If mode is not specified, defaults to null.
•
aes192<mode> - Same as aes128<mode>, except for a 192 bit key size.
•
aes256<mode> - Same as aes128<mode>, except for a 256 bit key size.
•
ecc - Elliptical Curve, defaults to ecc256.
•
ecc192 - 192 bit ECC
•
ecc224 - 224 bit ECC
•
ecc256 - 256 bit ECC
•
ecc384 - 384 bit ECC
•
ecc521 - 521 bit ECC
•
rsa - Default RSA: rsa2048
•
rsa1024 - RSA with 1024 bit keysize.
•
rsa2048 - RSA with 2048 bit keysize.
•
rsa4096 - RSA with 4096 bit keysize.

Next, is an optional field, it can be skipped.

Schemes are usually Signing Schemes or Asymmetric Encryption Schemes. Most signing schemes take a hash algorithm directly following the signing scheme. If the hash algorithm is missing, it defaults to sha256. Some take no arguments, and some take multiple arguments.

These scheme specifiers are followed by a dash and a valid hash algorithm, For example: oaep-sha256.
•
oaep
•
ecdh
•
rsassa
•
rsapss
•
ecdsa
•
ecschnorr

This scheme specifier is followed by a count (max size UINT16) then followed by a dash(-) and a valid hash algorithm. * ecdaa For example, ecdaa4-sha256. If no count is specified, it defaults to 4.

This scheme specifier takes NO arguments. * rsaes

This field is optional, and defaults based on the type of object being created and it’s attributes. Generally, any valid Symmetric specifier from the Type Specifiers list should work. If not specified, an asymmetric objects symmetric details defaults to aes128cfb.

tpm2_create -C parent.ctx -G rsa2048:rsaes -u key.pub -r key.priv

/tpm2_create -C parent.ctx -G ecc256:ecdaa4-sha384 -u key.pub -r key.priv 


tpm2_pcrread

    


tpm2_pcrread sha1

    


tpm2_pcrread -o pcrs sha1:16,17,18+sha256:16,17,18

    


tpm2_pcrread

The maximum number of PCR that can be dumped at once is associated with the maximum length of a bank.

On most TPMs, it means that this tool can dump up to 24 PCRs at once.

Tools can return any of the following codes:
•
0 - Success.
•
1 - General non-specific error.
•
2 - Options handling error.
•
3 - Authentication error.
•
4 - TCTI related error.
•
5 - Non supported scheme. Applicable to tpm2_testparams.

Github Issues (https://github.com/tpm2-software/tpm2-tools/issues)

See the Mailing List (https://lists.01.org/mailman/listinfo/tpm2)
tpm2-tools
Search for    or go to Top of page |  Section 1 |  Main Index

Powered by GSP Visit the GSP FreeBSD Man Page Interface.
Output converted with ManDoc.