NAME

SYNOPSIS

DESCRIPTION

Prepending a P: onto hostname causes the connection to go through the telnet-passthru service rather than directly to the host. See PASSTHRU below.

Prepending an S: onto hostname removes the "extended data stream" option reported to the host. See -tn below for further information.

Prepending an N: onto hostname turns off TN3270E support for the session.

Prepending an L: onto hostname causes x3270 to first create a TLS tunnel to the host, and then create a TN3270 session inside the tunnel. (This function is supported only if x3270 was built with TLS support). Note that TLS-encrypted sessions using the TELNET START-TLS option are negotiated with the host automatically; for these sessions the L: prefix should not be used.

Prepending a Y: onto hostname causes x3270 to skip validation of host TLS certificates. This overrides any other configuration or command-line options.

Prepending an A: onto hostname is equivalent to setting the -nvt option; it forces an NVT-mode session instead of a 3270-mode session.

A specific Logical Unit (LU) name to use may be specified by prepending it to the hostname with an `@'. Multiple LU names to try can be separated by commas. An empty LU can be placed in the list with an extra comma. (Note that the LU name is used for different purposes by different kinds of hosts. For example, CICS uses the LU name as the Terminal ID.)

The hostname may optionally be placed inside square-bracket characters `[' and `]'. This will prevent any colon `:' characters in the hostname from being interpreted as indicating option prefixes or port numbers. This allows numeric IPv6 addresses to be used as hostnames.

On systems that support the forkpty library call, the hostname may be replaced with -e and a command string. This will cause x3270 to connect to a local child process, such as a shell.

The port to connect to defaults to telnet. This can be overridden with the -port option, or by appending a port to the hostname with a colon `:'. (For compatability with previous versions of x3270 and with tn3270(1), the port may also be specified as a second, separate argument.)

An optional accept name (a hostname to accept in the host's TLS certificate) may be specified by appending it to the hostname with an equals sign (`='). The accept name can also be specified with the -accepthostname option.

OPTIONS

-accepthostname name

Specifies a particular hostname to accept when validating the name presented in the server SSL certificate, instead of comparing to the name used to make the connection.

-activeicon

Specifies that the icon should be a miniature version of the screen image. See ICONS below.

-apl

Sets up APL mode. This is actually an abbreviation for several options. See APL SUPPORT below.

-cadir directory

Specifies a directory containing CA (root) certificates to use when verifying a certificate provided by the host. (OpenSSL only)

-cafile filename

Specifies a PEM-format file containing CA (root) certificates to use when verifying a certificate provided by the host. (OpenSSL only)

-cc range:value[,...]

Sets character classes.

-certfile filename

Specifies a file containing a client certificate to provide to the host. The default file type is PEM.

-clientcert name

Specifies the name of a client certificate to provide to the host. (MacOS only)

-certfiletype type

Specifies the type of the certificate file specified by -certfile. Type can be pem or asn1. (OpenSSL only)

-chainfile filename

Specifies a certificate chain file in PEM format, containing a certificate to provide to the host, as well as one or more intermediate certificates and the CA certificate used to sign that certificate. If -chainfile is specified, it overrides -certfile. (OpenSSL only)

-clear toggle

Sets the initial value of toggle to false.

-codepage name

Specifies an EBCDIC host code page.

-connecttimeout seconds

Specifies the time that x3270 will wait for a host connection to complete.

-devname name

Specifies a device name (workstation ID) for RFC 4777 support.

-efont name

Specifies a font for the emulator window.

-hostsfile file

Uses file as the hosts file, which allows aliases for host names and scripts to be executed at login. See ibm_hosts(1) for details.

-httpd [addr:]port

Specifies a port and optional address to listen on for HTTP connections. Addr can be specified as `*' to indicate 0.0.0.0; the default is 127.0.0.1. IPv6 numeric addresses must be specified inside of square brackets, e.g., [::1]:4080 to specify the IPv6 loopback address and TCP port 4080.

Note that this option is mutually-exclusive with the -scriptport option

-iconname name

Specifies an alternate title for the program icon.

-iconx x

Specifies the initial x coordinate for the program icon.

-icony y

Specifies the initial y coordinate for the program icon.

-im method

Specifies the name of the input method to use for multi-byte input. (Supported only when x3270 is compiled with DBCS support.)

-keyfile filename

Specifies a file containing the private key for the certificate file (specified via -certfile or -chainfile). The default file type is PEM. (OpenSSL only)

-keyfiletype type

Specifies the type of the private key file specified by -keyfile. Type can be pem or asn1. (OpenSSL only)

-keypasswd type:value

Specifies the password for the private key file (OpenSSL) or client certificate file (MacOS), if it is encrypted. The argument can be file:filename, specifying that the password is in a file, or string:string, specifying the password on the command-line directly. If the private key file is encrypted and no -keypasswd option is given, the password will be prompted for interactively.

-keymap name

Specifies a keymap name and optional modifiers. See KEYMAPS below.

-keypad

Turns on the keypad as soon as x3270 starts.

-km name

Specifies the local encoding method for multi-byte text. name is an encoding name recognized by the ICU library. (Supported only when x3270 is compiled with DBCS support, and necessary only when x3270 cannot figure it out from the locale.)

-loginmacro Action(arg...) ...

Specifies a macro to run at login time.

-model name

The model of 3270 display to be emulated. The model name is in two parts, either of which may be omitted:

The first part is the base model, which is either 3278 or 3279. 3278 specifies a monochrome (green on black) 3270 display; 3279 specifies a color 3270 display.

The second part is the model number, which specifies the number of rows and columns. Model 4 is the default.

Note: Technically, there is no such 3270 display as a 3279-4 or 3279-5, but most hosts seem to work with them anyway.

The default model for a color X display is 3279-4. For a monochrome X display, it is 3278-4.

-mono

Forces x3270 to believe it is running on a monochrome X display.

-noverifycert

For TLS connections, do not verify the host certificate.

-nvt

Start in NVT mode instead of waiting for the host to send data, and make the default terminal type xterm.

-once

Causes x3270 to exit after a host disconnects. This option has effect only if a hostname is specified on the command line.

-oversize colsxrows

Makes the screen larger than the default for the chosen model number. This option has effect only in combination with extended data stream support (controlled by the "x3270.extended" resource), and only if the host supports the Query Reply structured field. The number of columns multiplied by the number of rows must not exceed 16383 (3fff hex), the limit of 14-bit 3270 buffer addressing.

-port n

Specifies a different TCP port to connect to. n can be a name from /etc/services like telnet, or a number. This option changes the default port number used for all connections. (The positional parameter affects only the initial connection.)

-printerlu luname

Causes x3270 to automatically start a pr3287 printer session. If luname is ".", then the printer session will be associated with the interactive terminal session (this requires that the host support TN3270E). Otherwise, the value is used as the explicit LU name to associate with the printer session.

-proxy type:host[:port]

Causes x3270 to connect via the specified proxy, instead of using a direct connection. The host can be an IP address or hostname. The optional port can be a number or a service name. For a list of supported proxy types, see PROXY below.

-pt type

Specifies the preedit type for the multi-byte input method. Valid values are OverTheSpot, OffTheSpot, Root and OnTheSpot. The value for OverTheSpot can include an optional suffix, a signed number indicating the vertical distance in rows of the preedit window from the cursor position, e.g. OverTheSpot+1 or OverTheSpot-2. The default value is OverTheSpot+1. (Supported only when x3270 is compiled with DBCS support.)

-reconnect

Causes x3270 to automatically reconnect to the host if it ever disconnects. This option has effect only if a hostname is specified on the command line.

-sb

Turns on the scrollbar.

+sb

Turns the scrollbar off.

-scheme name

Specifes a color scheme to use in 3279 mode. This option has effect only in combination with 3279 emulation.

-script

Causes x3270 to read actions from standard input, with the results written to standard output. The protocol for these actions is documented in x3270-script(1).

-sl n

Specifies that n lines should be saved for scrolling back. The default is 4096.

-scriptport [addr:]port

Specifies a port and optional address to listen on for scripting connections. Addr can be specified as `*' to indicate 0.0.0.0; the default is 127.0.0.1. IPv6 numeric addresses must be specified inside of square brackets, e.g., [::1]:4081 to specify the IPv6 loopback address and TCP port 4081.

Note that this option is mutually-exclusive with the -httpd option

-scriptportonce

Allows x3270 to accept only one script connection. When that connection is broken, x3270 will exit.

-secure

Disables run-time features that could compromise system security (user-specified file names and actions, etc.).

-set toggle

Sets the initial value of toggle to true.

-socket

Causes the emulator to create a Unix-domain socket when it starts, for use by script processes to send actions to the emulator. The socket is named /tmp/x3sck.pid. The -p option of x3270if causes it to use this socket, instead of pipes specified by environment variables.

-tn name

Specifies the terminal name to be transmitted over the telnet connection. The default name is IBM-model_name-E, for example, IBM-3279-4-E for a color X display, or IBM-3278-4-E for a monochrome X display.

Some hosts are confused by the -E suffix on the terminal name, and will ignore the extra screen area on models 3, 4 and 5. Prepending an S: on the hostname, or setting the "x3270.extended" resource to "false", removes the -E from the terminal name when connecting to such hosts.

The name can also be specified with the "x3270.termName" resource.

-trace

Turns on data stream tracing at startup. Unlike turning it on from a menu option, there is no pop-up to confirm the file name, which defaults to /tmp/x3trc.pid.

-tracefile file

Specifies a file to save data stream and event traces into. If the name starts with `>>', data will be appended to the file. If the value stdout is given, then traces will be written to standard output. If the value none is given, then traces will be piped directly to the monitor window, and no file will be created.

-tracefilesize size

Places a limit on the size of a trace file. If this option is not specified, or is specified as 0 or none, the trace file size will be unlimited. The minimum size is 64 Kbytes. The value of size can have a K or M suffix, indicating kilobytes or megabytes respectively. When the trace file reaches the size limit, it will be renamed with a `-' appended and a new file started.

-user name

Specifies the user name for RFC 4777 support.

-v

Display the version and build options for x3270 and exit.

-verifycert

For TLS connections, verify the host certificate, and do not allow the connection to complete unless it can be validated. (This is the default setting.) This option is overridden by a Y: prepended to the hostname when connecting.

After reading resource definitions from the X server and any standandard X11 resource definition files ($HOME/.Xdefaults, etc.), x3270 will read definitions from the file $HOME/.x3270pro. This file contains local customizations and is also used to save changed options by the Save Changed Options in File menu option.

Note that -xrm options override any definitions in the .x3270pro file.

STATUS LINE

comm status

The first symbol is always a 4. If x3270 is in TN3270E mode, the second symbol is a B; otherwise it is an A. If x3270 is disconnected, the third symbol is a question mark. Otherwise, if x3270 is in SSCP-LU mode, the third symbol is an S. Otherwise it is blank.

keyboard lock

If the keyboard is locked, an "X" symbol and a message field indicate the reason for the keyboard lock.

shift

Three characters indicate the keyboard modifier status. "M" indicates the Meta key, "A" the Alt key, and an up-arrow or "^" indicates the Shift key.

compose

The letter "C" indicates that a composite character is in progress. If another symbol follows the "C", it is the first character of the composite.

typeahead

The letter "T" indicates that one or more keystrokes are in the typeahead buffer.

temporary keymap

The letter "K" indicates that a temporary keymap is in effect.

reverse

The letter "R" indicates that the keyboard is in reverse field entry mode.

insert mode

A thick caret "^" or the letter "I" indicates that the keyboard is in insert mode.

printer session

The letter "P" indicates that a pr3287 session is active.

script

The letter "S" indicates that a script is active.

LU name

The LU name associated with the session, if there is one.

timing

A clock symbol and a time in seconds indicate the time it took to process the last AID or the time to connect to a host. This display is optional.

cursor position

The cursor row and column are optionally displayed, zero padded and separated by a "/". Location 001/001 is at the upper left, which is different from the row and columns parameters used with various actions, where the upper left corner is row 0, column 0.

ICONS

mwm

The size of the icon is limited by the "Mwm.iconImageMaximum" resource, which defaults to 50x50. The image will be clipped at the bottom and right. The icon cannot accept keyboard input.

olwm

The full screen image of all 3270 models can be displayed on the icon. However, the icon cannot be resized, so if the model is later changed with an x3270 menu option, the icon image will be corrupted. The icon cannot accept keyboard input.

twm and tvtwm

The full screen image of all 3270 models can be displayed on the icon, and the icon can be resized. The icon can accept keyboard input.

However, twm does not put labels on application-supplied icon windows. You can have x3270 add its own label to the icon by setting the "x3270.labelIcon" resource to true. The default font for icon labels is 8x13; you may change it with the "x3270.iconLabelFont" resource.

KEYMAPS

The keymap may also be specified as a comma-separated list of names. Later definitions override earlier ones. This is used to specify both a primary keyboard type and a set of modifiers. The modifiers defined include:

ow

(OpenWindows) Swaps the middle and right mouse button definitions, so the middle button performs the "Extend" function and the right-hand button performs the "Paste" function. Also changes the cut and paste actions to use the OpenWindows CLIPBOARD.

apl

Allows entry of APL characters (see APL SUPPORT below).

finnish7

Replaces the bracket, brace and bar keys with common Finnish characters.

norwegian7

Replaces the bracket, brace and bar keys with common Norwegian characters.

A temporary keymap can also be specified while x3270 is running with the Keymap action. When the action Keymap(n) is executed, temporary keymap n is added to or deleted from the current keymap. Multiple temporary keymaps can be active simultaneously. The action Keymap(None) restores the original keymap. Note: When Keymap() is specified as part of a list of multiple actions in a keymap, it must be the last action in the list.

The temporary keymap hebrew is provided to allow entry of Hebrew characters.

The X Toolkit translation mechanism is used to provide keyboard emulation. It maps events into actions. The best documentation can be found with X toolkit documents, but the following should suffice for simple customization.

An Xt event consists of (at least) four fields. The first is called a modifier. It may be any combination of Meta, Shift and Ctrl. If it is prefaced by !, it means those modifiers only. The second field is the specific event, in x3270 usually just <Key>. The third field is the detail field, which gives the actual key. The name of the key may be determined using the xev program or with the "Trace X Events" menu option. The last field is the action, which is the internal emulator function. A complete list of actions may be found later in the manual.

There are three levels of translation tables in x3270. The first is a defined by the resource x3270.keymap.base. It defines alphabetic, numeric, function keys, and such basic functions as Enter and Delete. It allows a minimal useful functionality. It is generally compiled in x3270, but can be overridden.

The second level is a keyboard specific table, which is selected by the x3270.keymap resource, and defined by the x3270.keymap.name resource (where name is the value of the x3270.keymap resource). This keymap defines actions for such things as keypad keys, and keys unique to certain keyboards. Several predefined keymaps are included with x3270.

The third level is a user customizable table which may be used to augment or override key definitions. This keymap is defined by the x3270.keymap.name.user resource.

In addition, keymaps may be defined for use in 3270 mode or NVT mode only. These keymaps use the suffixes .3270 and .nvt in their names, respectively. If a keymap x3270.keymap.name.mode is defined, it will augment the keymap x3270.keymap.name when x3270 is in the given mode. If a keymap x3270.keymap.name.user.mode is defined, it will augment the keymap x3270.keymap.name.user when x3270 is in the given mode.

The default translation table x3270.keymap.base is:

The default 3270-mode table x3270.keymap.base.3270 adds the following definitions:

Meta is the diamond shaped key on a sun_k4, "Alt" on an NCD, "Extend Char" on an HP. The following xmodmap command must be used on the NCD to allow use the the "Alt" key:

The left mouse button may be used to make a selection. Clicking once unselects the current selection. Clicking twice selects the word under the mouse cursor. Clicking three times selects the line under the mouse cursor. Clicking and dragging selects a rectangular area of the display.

The middle mouse button may be used to paste a selection.

The right mouse button may also be used for selections, selecting the rectangular area between the current position and where the left button was last pressed.

On color X displays, the "x3270.selectBackground" resource is used to distinguish the selected text from the rest of the screen. On monochrome X displays, selected text is in reverse video. (It can be distinguished from a block cursor because the block cursor covers slightly less than an entire character position on the screen.)

The left mouse button, when pressed with the "Shift" key held down, moves the 3270 cursor to the where the mouse cursor is pointing.

This is the complete list of keymap-callable actions. Other actions are defined for use by scripts and are documented in x3270-script(1); still others are defined for internal use by x3270 and are not documented here. Note that when an action with no parameters is used in a keymap, the parentheses and empty argument list are still required.

Actions marked with an asterisk (*) may block, sending data to the host and possibly waiting for a response.

Note that certain parameters to x3270 actions (such as the names of files and keymaps) are subject to substitutions:

The character ~ at the beginning of a string is replaced with the user's home directory. A ~ character followed by a username is replaced with that user's home directory.

Environment variables are substituted using the Unix shell convention of $name or ${name}.

Two special pseudo-environment variables are supported. ${TIMESTAMP} is replaced with a microsecond-resolution timestamp; ${UNIQUE} is replaced with a string guaranteed to make a unique filename (the process ID optionally followed by a dash and a string of digits). ${UNIQUE} is used to form trace file names.

THE PRINTTEXT ACTION

Multiple arguments can include keywords to control the output of PrintText():

file,filename

Save the output in a file.

html

Save the output as HTML. This option implies file.

rtf

Save the output as RichText. This option implies file. The font defaults to Courier New and the point size defaults to 8. These can be overridden by the printTextFont and printTextSize resources, respectively.

string

Return the output as a string. This can only be used from scripts.

modi

Render modified fields in italics.

caption,text

Add the specified text as a caption above the output. Within text, the special sequence %T% will be replaced with a timestamp.

secure

Disables the pop-up dialog.

command,command

Directs the output to a command. This allows one or more of the other keywords to be specified, while still sending the output to the printer.

MACROS AND SCRIPTS

The String Action

The simplest method for macros is provided via the String() action, which can be bound to any key in a keymap. The arguments to String() are one or more double-quoted strings which are inserted directly as if typed. The C backslash conventions are honored as follows. (Entries marked * mean that after sending the AID code to the host, x3270 will wait for the host to unlock the keyboard before further processing the string.)

\b	Left()
\exxxx	EBCDIC character in hex
\f	Clear()*
\n	Enter()*
\pan	PA(n)*
\pfnn	PF(nn)*
\r	Newline()
\t	Tab()
\T	BackTab()
\uxxxx	Unicode character in hex
\xxxxx	Unicode character in hex

Note that the numeric values for the \e, \u and \x sequences can be abbreviated to 2 digits. Note also that EBCDIC codes greater than 255 and some Unicode character codes represent DBCS characters, which will work only if x3270 is built with DBCS support and the host allows DBCS input in the current field.

An example keymap entry would be:

Note: The strings are in ASCII and converted to EBCDIC, so beware of inserting control codes. Also, a backslash before a p may need to be doubled so it will not be removed when a resource file is read.

There is also an alternate form of the String() action, HexString(), which is used to enter non-printing data. The argument to HexString() is a string of hexadecimal digits, two per character. A leading 0x or 0X is optional. In 3270 mode, the hexadecimal data represent EBCDIC characters, which are entered into the current field. In NVT mode, the hexadecimal data represent ASCII characters, which are sent directly to the host.

The Script Action

This action causes x3270 to start a child process which can execute x3270 actions. Standard input and output from the child process are piped back to x3270. The Script() action is fully documented in x3270-script(1).

The macros Resource

An alternate method of defining macros is the "x3270.macros" resource. This resource is similar to a keymap, but instead of defining keyboard mappings, it associates a list of X actions with a name. These names are displayed on a Macros menu that appears when x3270 is connected to a host. Selecting one of the names on the menu executes the X actions associated with it. Typically the actions are String() calls, but any action may be specified. Here is a sample macros resource definition, which would result in a four-entry Macros menu:

You can also define a different set of macros for each host. If there is a resource named `x3270.macros.somehost', it defines the macros menu for when x3270 is connected to somehost.

The -script Option

This facility allows x3270 to operate under the complete control of a script. x3270 accepts actions from standard input, and prints results on standard output. The -script option is fully documented in x3270-script(1).

COMPOSITE CHARACTERS

The mappings between these pairs of ordinary keys and the symbols they represent is controlled by the "x3270.composeMap" resource; it gives the name of the map to use. The maps themselves are named "x3270.composeMap.name". The default is "latin1", which gives mappings for most of the symbols in the ISO 8859-1 Latin-1 character set that are not in the 7-bit ASCII character set.

Note: The default keymap defines the "Multi_key" keysym as the "Compose" key. If your keyboard lacks such a key, you may set up your own "Compose" key with a keymap that maps some other keysym onto the Compose() action.

APL SUPPORT

APL characters are supported only in the special 3270 font.

Keyboard entry of APL characters is supported through the apl keymap modifier. This modifier defines the "Alt" key as an APL shift key, with a typical APL keyboard layout, e.g., "Alt" pressed with the A key results in the APL "alpha" symbol. Overstruck characters such as "quad-quote" are not defined as single keystrokes; instead they are entered as composites (see COMPOSITE CHARACTERS above). A special composite map, apl, is provided for this purpose.

Note: Some keyboards do not define the "Alt" key as a modifier, so keymaps that use the "Alt" key will not function. On a Sun for example, this can be remedied with the command:

For convenience, an -apl option is defined, which is an abbreviation for the following resource definitions:

There are a number of APL characters that are similar in appearance to non-APL characters. In particular, the APL "stile", "slope," "tilde" and "quotedot" characters are similar to the EBCDIC "bar", "backslash," "tilde" and "exclaim" characters. The APL characters are entered with the "Alt" key, and have slightly different appearances.

The complete list of special APL keysyms is as follows. Entries marked with an asterisk (*) represent simple aliases for standard EBCDIC characters. Entries marked with an (S) represent Sharp APL charatcers.

XIM SUPPORT

The input method is selected by the XMODIFIERS environment variable or the -im command-line option.

The preedit type is specified by the -pt command-line option, with a default of OverTheSpot+1.

SCREEN PRINTING

The PrintText() action (usually assigned to the key <Meta>p) sends the current screen image to the printer as ASCII characters. The default command used to print the data is controlled by the "x3270.printTextCommand" resource; the default is lpr. You may also use a keymap definition to pass a print command the PrintText() action itself. The command receives the screen text as its standard input. For example, the following keymap will save the screen text in a file:

The PrintWindow() action (usually assigned to the key <Meta>b) sends the current screen image to the printer as a bitmap. The default command used to print the data is controlled by the "x3270.printWindowCommand" resource; the default is

You may also use a keymap definition to pass a print command to the PrintWindow() action itself. If the command contains the text "%d", the window ID of x3270 will be substituted before it is run. For example, the following keymap will pop up a duplicate of the current screen image:

If the command for PrintWindow() or PrintText() begins with an "@" character, the initial pop-up menu to confirm the print command is not displayed and the command cannot be edited.

BUGS

PASSTHRU

PROXY

The special types socks4a and socks5d can also be used to force the proxy server to do the hostname resolution for the SOCKS protocol. Note that only the http and socks5 proxies support a username and password.

FILES

ENVIRONMENT VARIABLES

SEE ALSO

COPYRIGHTS

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

*

Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

*

Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

*

Neither the names of Paul Mattes, Don Russell, Dick Altenbern, Jeff Sparkes, GTRC nor the names of their contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY PAUL MATTES, DON RUSSELL, DICK ALTENBERN, JEFF SPARKES AND GTRC "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL PAUL MATTES, DON RUSSELL, DICK ALTENBERN, JEFF SPARKES OR GTRC BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

VERSION