Constructing an arg_<xxx> data structure

struct arg_int* arg_int0("f", "foo", "<int>", "the foo factor")
struct arg_int* arg_int1("f", "foo", "<int>", "the foo factor")
struct arg_int* arg_intn("f", "foo", "<int>", 2, 4, "the foo factor")

where arg_int0() and arg_int1() are merely abbreviated forms of arg_intn(). They are provided for convenience when defining command line options that have either zero-or-one occurrences (mincount=0,maxcount=1) or exactly one occurrence (mincount=1,maxcount=1) respectively.

The shortopts="f" parameter defines the option's short form tag (eg -f). Multiple alternative tags may be defined by concatenating them (eg shortopts="abc" defines options -a, -b and -c as equivalent). Specify shortopts=NULL when no short option is required.

The longopts="foo" parameter defines the option's long form tag (eg --foo). Multiple alternative long form tags may be separated by commas (eg longopts="size,limit" defines --size and --limit). Do not include any whitespace in the longopts string. Specify longopts=NULL when no long option is required.

If both shortopts and longopts are NULL then the option is an untagged argument.

The datatype="<int>" parameter is a descriptive string that denotes the argument data type in error messages, as in --foo=<int>. Specifying datatype=NULL indicates the default datatype should be used. Specifying datatype="" effectively disables the datatype display.

The mincount=2 and maxcount=3 parameters specify the minimum and maximum number of occurrences of the option on the command line. If the command line option does not appear the required number of times then the parser reports a syntax error.

The glossary="the foo factor" parameter is another descriptive string. It appears only in the glossary table that is generated automatically by the arg_print_glossary function (described later).

-f, --foo=<int> the foo factor

Specifying a NULL glossary string causes that option to be omitted from the glossary table.

LITERAL COMMAND LINE OPTIONS

struct arg_lit
   {
   struct arg_hdr hdr;  /* internal argtable header */
   int count;           /* number of matching command line options */
   };

Literal options take no argument values. Upon a successful parse, count is guaranteed to be within the mincount and maxcount limits specified at construction.

INTEGER COMMAND LINE OPTIONS

Argtable accepts command line integers in decimal (eg 123), hexadecimal (eg 0xFF12), octal (eg 0o123) and binary (eg 0b0101110) formats. It also accepts integers that are suffixed by "KB" (x1024), "MB" (x1048576) or "GB" (x1073741824). All characters are case insensitive

struct arg_int
   {
   struct arg_hdr hdr;  /* internal argtable header */
   int count;           /* number of values returned in ival[] */
   int *ival;           /* array of parsed integer values */
   };

Upon a successful parse, count is guaranteed to be within the mincount and maxcount limits set for the option at construction with the appropriate values store in the ival array. The parser will not accept any values beyond that limit.

Hint: It is legal to set default values in the ival array prior to calling the arg_parse function. Argtable will not alter ival entries for which no command line argument is received.

Hint: Untagged numeric arguments are not recommended because GNU getopt mistakes negative values (eg -123) for tagged options (eg -1 -2 -3). Tagged arguments (eg -x -123, --tag=-123) do not suffer this problem.

REAL/DOUBLE COMMAND LINE OPTIONS

struct arg_dbl
   {
   struct arg_hdr hdr;  /* internal argtable header */
   int count;           /* number of values returned in dval[] */
   double *dval;        /* array of parsed double values */
   };

Same as arg_int except the parsed values are stored in dval as doubles.

STRING COMMAND LINE OPTIONS

struct arg_str
   {
   struct arg_hdr hdr;  /* internal argtable header */
   int count;           /* number of strings returned in sval[] */
   const char **sval;   /* array of pointers to parsed argument strings */
   };

Same as arg_int except pointers to the parsed strings are returned in sval rather than a separate copy of the string. Indeed, these pointers actually reference the original string buffers stored in argv[], so their contents should not be altered. However, it is legal to initialise the string pointers in the sval array to reference user-supplied default strings prior to calling arg_parse. Argtable will only alter the contents of sval when matching command line arguments are detected.

REGULAR EXPRESSION COMMAND LINE OPTIONS

struct arg_rex
   {
   struct arg_hdr hdr;  /* internal argtable header */
   int count;           /* number of strings returned in sval[] */
   const char **sval;   /* array of pointers to parsed argument strings */
   };

Similar to arg_str except the string argument values are only accepted if they match a predefined regular expression. Regular expressions are useful for matching command line keywords, particularly if case insensitive strings or pattern matching is required. The regular expression is defined by the pattern parameter passed to the arg_rex constructor and evaluated using regex. Its behaviour can be controlled via standard regex bit flags. These are passed to argtable via the flags parameter in the arg_rex constructor. However the only two of the standard regex flags are relevant to argtable, namely REG_EXTENDED (use extended regular expressions rather than basic ones) and REG_ICASE (ignore case). These flags may be logically ORed if desired. See regex(3) for more details of regular expression matching.

Restrictions: Argtable does not support arg_rex functionality under Microsoft Windows platforms because the Microsoft compilers do include the necessary regex support as standard.

FILENAME COMMAND LINE OPTIONS

struct arg_file
   {
   struct arg_hdr hdr;      /* internal argtable header */
   int count;               /* number of filename strings returned */
   const char **filename;   /* pointer to full filename string */
   const char **basename;   /* pointer to filename excluding leading path */
   const char **extension;  /* pointer to the filename extension */ 
   };

Similar to arg_str but the argument strings are presumed to refer to filenames hence some additional parsing is done to separate out the filename's basename and extension (if they exist). The three arrays filename[], basename[], extension[] each store up to maxcount entries, and the i'th entry of each of these arrays refer to different components of the same string buffer.

For example, -o /home/heitmann/mydir/foo.txt would be parsed as:

filename[i]  = "/home/heitmann/mydir/foo.txt"
basename[i]  =                      "foo.txt"
extension[i] =                         ".txt"

If the filename has no leading path then the basename is the same as the filename. If no extension could be identified then it is given as NULL. Extensions are considered as all text from the last dot in the filename.

Hint: Argtable only ever treats the filenames as strings and never attempts to open them as files or perform any directory lookups on them.

DATE/TIME COMMAND LINE OPTIONS

struct arg_date
   {
   struct arg_hdr hdr;  /* internal argtable header */
   const char *format;  /* user-supplied date format string that was passed to constructor */
   int count;           /* number of datestamps returned in tmval[] */
   struct tm *tmval;    /* array of datestamps */
   };

Accepts a timestamp string from the command line and converts it to struct tm format using the system strptime function. The time format is defined by the format string passed to the arg_date constructor, and is passed directly to strptime. See strptime(3) for more details on the format string.

Restrictions: Argtable does not support arg_date functionality under Microsoft Windows because the Microsoft compilers do include the necessary strptime support as standard.

REMARK OPTIONS

struct arg_rem
   {
   struct arg_hdr hdr;  /* internal argtable header */
   };

The arg_rem struct is a dummy struct in the sense it does not represent a command line option to be parsed. Instead it provides a means to include additional datatype and glossary strings in the output of the arg_print_syntax, arg_print_syntaxv, and arg_print_glossary functions. As such, arg_rem structs may be used in the argument table to insert additional lines of text into the glossary descriptions or to insert additional text fields into the syntax description.

END-OF-TABLE OPTION

struct arg_end
   {
   struct arg_hdr hdr;  /* internal argtable header */
   int count;           /* number of errors returned */
   int *error;          /* array of error codes */
   void **parent;       /* pointers to the erroneous command line options */
   const char **argval; /* pointers to the erroneous command line argument values */
   };

Every argument table must have an arg_end structure as its last entry.
It marks the end of an argument table and stores the error codes generated
by the parser as it processed the argument table.
The maxerrors parameter passed to the arg_end constructor
specifies the maximum number of errors that the structure can store.
Any further errors are discarded and replaced with the single error code
ARG_ELIMIT which is later reported to the user by the message "too many errors".
A maxerrors limit of 20 is quite reasonable.

The arg_print_errors function will print the errors stored
in the arg_end struct in the same order as they occurred,
so there is no need to understand the internals of the arg_end struct.

int arg_nullcheck (void **argtable)

int arg_parse (int argc, char **argv, void **argtable)

void arg_print_option (FILE *fp, const char *shortopts, const char *longopts, const char *datatype, const char *suffix)

void arg_print_syntax (FILE *fp, void **argtable, const char *suffix)

void arg_print_syntaxv (FILE *fp, void **argtable, const char *suffix)

void arg_print_glossary (FILE *fp, void **argtable, const char *format)

void arg_print_glossary_gnu (FILE *fp, void **argtable)

void arg_print_errors (FILE *fp, struct arg_end *end, const char *progname)

void arg_freetable (void ** argtable, size_t n)