Launcher script

    #!/usr/bin/env perl
    use Dancer;
    use MyApp;
    dance;

In Dancer2 it is available as bin/app.psgi and looks like this:

    #!/usr/bin/env perl

    use strict;
    use warnings;
    use FindBin;
    use lib "$FindBin::Bin/../lib";

    use MyApp;
    MyApp->to_app;

So you need to remove the "use Dancer;" part, replace the "dance;" command by "MyApp->to_app;" (where MyApp is the name of your application), and add the following lines:

    use strict;
    use warnings;
    use FindBin;
    use lib "$FindBin::Bin/../lib";

There is a Dancer Advent Calendar <http://advent.perldancer.org> article covering the "to_app" keyword <http://advent.perldancer.org/2014/9> and its usage.

Configuration

Apps

For example, to set the appname directive explicitly:

"MyApp":

    package MyApp;
    use Dancer2;
    use MyApp::Admin

    hook before => sub {
        var db => 'Users';
    };

    get '/' => sub {...};

    1;

"MyApp::Admin":

    package MyApp::Admin;
    use Dancer2 appname => 'MyApp';

    # use a lexical prefix so we don't override it globally
    prefix '/admin' => sub {
        get '/' => sub {...};
    };

    1;

Without the appname directive, "MyApp::Admin" would not have access to variable "db". In fact, when accessing "/admin", the before hook would not be executed.

See Dancer2::Cookbook <https://metacpan.org/pod/Dancer2::Cookbook#Using-the-prefix-feature-to-split-your-application> for details.

2. To speed up an app in Dancer2, install the recommended modules listed in the "Performance Improvements" in Dancer2::Manual::Deployment section.

Request

Currently the following attributes pass directly to Plack::Request:

"address", "remote_host", "protocol", "port", "method", "user", "request_uri", "script_name", "content_length", "content_type", "content_encoding", "referer", and "user_agent".

If previous attributes returned undef for no value beforehand, they will return whatever Plack::Request defines now, which just might be an empty list.

For example:

    my %data = (
        referer    => request->referer,
        user_agent => request->user_agent,
    );

should be replaced by:

    my %data = (
        referer    => request->referer    || '',
        user_agent => request->user_agent || '',
    );

Plugins: plugin_setting

Routes

For example:

    get '0' => sub {
        return "not gonna fly";
    };

would return an error. The correct way to write this would be to use "get '/0'"

Route parameters

We have introduced "route_parameters" to retrieve parameter values from the route matching. Please refer to Dancer2::Manual for more information.

Tests

For example:

    use strict;
    use warnings;
    use Test::More tests => 2;
    use Plack::Test;
    use HTTP::Request::Common;

    {
        package App::Test; # or whatever you want to call it
        get '/' => sub { template 'index' };
    }

    my $test = Plack::Test->create( App::Test->to_app );
    my $res  = $test->request( GET '/' );

    ok( $res->is_success, '[GET /] Successful' );
    like( $res->content, qr{<title>Test2</title>}, 'Correct title' );

Other modules that could be used for testing are:

• Test::TCP
• Test::WWW::Mechanize::PSGI

Logs

The "logger_format" in the Logger role (Dancer2::Core::Role::Logger) is now "log_format".

"read_logs" can no longer be used, as with Dancer2::Test. Instead, Dancer2::Logger::Capture could be used for testing, to capture all logs to an object.

For example:

    use strict;
    use warnings;
    use Test::More import => ['!pass'];
    use Plack::Test;
    use HTTP::Request::Common;
    use Ref::Util qw<is_coderef>;

    {
        package App;
        use Dancer2;

        set log       => 'debug';
        set logger    => 'capture';

        get '/' => sub {
            debug 'this is my debug message';
            return 1;
        };
    }

    my $app = Dancer2->psgi_app;
    ok( is_coderef($app), 'Got app' );

    test_psgi $app, sub {
        my $cb = shift;

        my $res = $cb->( GET '/' );
        is $res->code, 200;

        my $trap = App->dancer_app->logger_engine->trapper;

        is_deeply $trap->read, [
            { level => 'debug', message => 'this is my debug message' }
        ];
    };

Exports: Tags

 use Dancer2 qw(:syntax);
 use Dancer2 qw(:tests);
 use Dancer2 qw(:script);

The "plackup" command should be used instead. It provides a development server and reads the configuration options in your command line utilities.

Engines

• Engines receive a logging callback

  Engines now receive a logging callback named "log_cb". Engines can use it to log anything in run-time, without having to worry about what logging engine is used.

  This is provided as a callback because the logger might be changed in run-time and we want engines to be able to always reach the current one without having a reference back to the core application object.

  The logger engine doesn't have the attribute since it is the logger itself.

• Engines handle encoding consistently

  All engines are now expected to handle encoding on their own. User code is expected to be in internal Perl representation.

  Therefore, all serializers, for example, should deserialize to the Perl representation. Templates, in turn, encode to UTF-8 if requested by the user, or by default.

  One side-effect of this is that "from_yaml" will call YAML's "Load" function with decoded input.

Templating engine changes

Whereas in Dancer1, the following were equivalent for Template::Toolkit:

    template 'foo/bar'
    template '/foo/bar'

In Dancer2, when using Dancer2::Template::TemplateToolkit, the version with the leading slash will try to locate "/foo/bar" relative to your filesystem root, not relative to your Dancer application directory.

The Dancer2::Template::Simple engine is unchanged in this respect.

Whereas in Dancer1, template engines have the methods:

    $template_engine->view('foo.tt')
    $template_engine->view_exists('foo.tt')

In Dancer2, you should instead write:

    $template_engine->view_pathname('foo.tt')
    $template_engine->pathname_exists($full_path)

You may not need these unless you are writing a templating engine.

Serializers

You no longer need to implement the "loaded" method. It is simply unnecessary.

Sessions

Now the Simple session engine is turned on by default, unless you specify a different one.

Configuration

You cannot set the public directory with "setting" now. Instead you will need to call "config":

    # before
    setting( 'public_dir', 'new_path/' );

    # after
    config->{'public_dir'} = 'new_path';

warnings

The "warnings" configuration option, along with the environment variable "DANCER_WARNINGS", have been removed and have no effect whatsoever.

They were added when someone requested to be able to load Dancer without the warnings pragma, which it adds, just like Moose, Moo, and other modules provide.

If you want this to happen now (which you probably shouldn't be doing), you can always control it lexically:

    use Dancer2;
    no warnings;

You can also use Dancer2 within a narrower scope:

    { use Dancer2 }
    use strict;
    # warnings are not turned on

However, having warnings turned it is very recommended.

server_tokens

The configuration "server_tokens" has been introduced in the reverse (but more sensible, and Plack-compatible) form as "no_server_tokens".

"DANCER_SERVER_TOKENS" changed to "DANCER_NO_SERVER_TOKENS".

engines

If you want to use Template::Toolkit instead of the built-in simple templating engine you used to enable the following line in the config.yml file.

    template: "template_toolkit"

That was enough to get started. The start_tag and end_tag it used were the same as in the simple template <% and %> respectively.

If you wanted to further customize the Template::Toolkit you could also enable or add the following:

    engines:
      template_toolkit:
         encoding:  'utf8'
         start_tag: '[%'
         end_tag:   '%]'

In Dancer 2 you can also enable Template::Toolkit with the same configuration option:

    template: "template_toolkit"

But the default start_tag and end_tag are now [% and %], so if you used the default in Dancer 1 now you will have to explicitly change the start_tag and end_tag values. The configuration also got an extra level of depth. Under the "engine" key there is a "template" key and the "template_toolkit" key comes below that. As in this example:

    engines:
      template:
        template_toolkit:
          start_tag: '<%'
          end_tag:   '%>'

In a nutshell, if you used to have

    template: "template_toolkit"

You need to replace it with

    template: "template_toolkit"
    engines:
      template:
        template_toolkit:
          start_tag: '<%'
          end_tag:   '%>'

Session engine

The session engine is configured in the "engine" section.

• "session_name" changed to "cookie_name".
• "session_domain" changed to "cookie_domain".
• "session_expires" changed to "cookie_duration".
• "session_secure" changed to "is_secure".
• "session_is_http_only" changed to "is_http_only".

Dancer2 also adds two attributes for session:

• "cookie_path" The path of the cookie to create for storing the session key. Defaults to "/".
• "session_duration" Duration in seconds before sessions should expire, regardless of cookie expiration. If set, then SessionFactories should use this to enforce a limit on session validity.

See Dancer2::Core::Role::SessionFactory for more detailed documentation for these options, or the particular session engine for other supported options.

  session: Simple

  engines:
    session:
      Simple:
        cookie_name: dance.set
        cookie_duration: '24 hours'
        is_secure: 1
        is_http_only: 1

Plack Middleware

In Dancer1 you could set up Plack Middleware using a "plack_middlewares" key in your "config.yml" file. Under Dancer2 you will instead need to invoke middleware using Plack::Builder, as demonstrated in Dancer2::Manual::Deployment.

Keywords

In Dancer1, keywords could be imported individually into a package:

    package MyApp;
    use Dancer qw< get post params session >;

    get '/foo' { ... };

Any keywords you did't export could be called explicitly:

    package MyApp;
    use Dancer qw< get post params session >;
    use List::Util qw< any >;

    Dancer::any sub { ... };

Dancer2's DSL is implemented differently. Keywords only exist in the namespace of the package which "use"s Dancer2, i.e. there is no "Dancer2::any", only e.g. "MyApp::any".

If you only want individual keywords, you can write a shim as follows:

    package MyApp::DSL;
    use Dancer2 appname => 'MyApp';

    use Exporter qw< import >;

    our @EXPORT = qw< get post ... >

Then in other packages:

    package MyApp;

    use MyApp::DSL qw< get post >;

    MyApp::DSL::any sub { ... };

appdir

This keyword does not exist in Dancer2. However, the same information can be found in "config->{'appdir'}".

load

This keyword is no longer required. Dancer2 loads the environment automatically and will not reload any other environment when called with load. (It's a good thing.)

param_array

This keyword doesn't exist in Dancer2.

session

In Dancer a session was created and a cookie was sent just by rendering a page using the "template" function. In Dancer2 one needs to actually set a value in a session object using the "session" function in order to create the session and send the cookie.

The session keyword has multiple states:

• No arguments

  Without any arguments, the session keyword returns a Dancer2::Core::Session object, which has methods for read, write, and delete.

      my $session = session;
      $session->read($key);
      $session->write( $key => $value );
      $session->delete($key);
      

• Single argument (key)

  If a single argument is provided, it is treated as the key, and it will retrieve the value for it.

      my $value = session $key;
      

• Two arguments (key, value)

  If two arguments are provided, they are treated as a key and a value, in which case the session will assign the value to the key.

      session $key => $value;
      

• Two arguments (key, undef)

  If two arguments are provided, but the second is undef, the key will be deleted from the session.

      session $key => undef;
      

In Dancer 1 it wasn't possible to delete a key, but in Dancer2 we can finally delete:

    # these two are equivalent
    session $key => undef;

    my $session = session;
    $session->delete($key);

You can retrieve the whole session hash with the "data" method:

    $session->data;

To destroy a session, instead of writing:

    session->destroy

In Dancer2, we write:

    app->destroy_session if app->has_session

If you make changes to the session in an "after" hook, your changes will not be written to storage, because writing sessions to storage also takes place in an (earlier) "after" hook.