|
Unix VPS
Support
FAQ
Network
Miscellaneous
|
| GMPf(3) | User Contributed Perl Documentation | GMPf(3) |
NAME
Math::GMPf - perl interface to the GMP library's floating point (mpf) functions.
DEPENDENCIES
This module needs the GMP C library - available from: http://gmplib.org
DESCRIPTION
A bigfloat module utilising the Gnu MP (GMP) library. Basically this module simply wraps all of the 'mpf' floating point functions provided by that library. The documentation below extensively plagiarises the GMP documentation at https://gmplib.org . See the Math::GMPf test suite for some examples of usage.
SYNOPSIS
use Math::GMPf qw(:mpf);
my $string = '.123542@2'; # mantissa = (.)12345
# exponent = 2
# my $string = '12.354'; # alternative string format
my $base = 10;
# Set the default precision to at least 80 bits.
Rmpf_set_default_prec(80);
# Create the Math::GMPf object
my $bn1 = Rmpf_init_set_str($string, $base);
# Create another Math::GMPf object that holds
# an initial value of zero, but with at least
# 131 bits of precision.
my $bn2 = Rmpf_init2(131);
# Create another Math::GMPf object that holds
# an initial value of zero, with default precision.
my $bn3 = Rmpf_init();
# Or just use the new() function:
my $bn4 = Math::GMPf->new(116.8129);
# Perform some operations ... see 'FUNCTIONS' below.
.
.
# print out the value held by $bn1 (in octal):
print Rmpf_get_str($bn1, 8, 0), "\n";
# print out the value held by $bn1 (in decimal):
print Rmpf_get_str($bn1, 10, 0);
# print out the value held by $bn1 (in base 29)
# using the (alternative) TRmpf_out_str()
# function. (This function doesn't print a newline.)
TRmpf_out_str(*STDOUT, 29, 0, $bn1);
MEMORY MANAGEMENT
Objects created with Rmpf_init* functions have been blessed into package Math::GMPf. They will therefore be automatically cleaned up by the DESTROY() function whenever they go out of scope. For each Rmpf_init* fnction there is a corresponding Rmpf_init*_nobless function. If you wish you can create unblessed objects using these functions. It will then be up to you to clean up the memory associated with these objects by calling Rmpf_clear($op), for each object. Alternatively the objects will be cleaned up when the script ends. I don't know why you would want to create unblessed objects. The point is that you can if you want to.
FUNCTIONS
See the GMP documentation at http://gmplib.org
These next 3 functions are demonstrated above:
$rop = Rmpf_init_set_str($str, $base); # 1 < abs($base) < 63
$rop = Rmpf_init2($bits); # $bits > 0
$str = Rmpf_get_str($r, $base, $digits); # 1 < abs($base) < 63
The third argument to Rmpf_get_str() specifies the number
of digits required to be output. Up to $digits digits
will be generated. Trailing zeros are not returned. No
more digits than can be accurately represented by OP are
ever generated. If $digits is 0 then that accurate
maximum number of digits are generated.
The following functions are simply wrappers around a GMP
function of the same name. eg. Rmpf_swap() is a wrapper around
mpf_swap() which is fully documented in the GMP manual at
http://gmplib.org.
"$rop", "$op1", "$op2", etc. are simply Math::GMPf objects
- the return value of one of the Rmpf_init* functions
(or their '_nobless' counterpart).
They are in fact references to GMP structures.
The "$rop" argument(s) contain the result(s) of the calculation
being done, the "$op" argument(s) being the input(s) into that
calculation.
Generally, $rop, $op1, $op2, etc. can be the same perl variable,
though usually they will be distinct perl variables referencing
distinct GMP structures.
Eg. something like Rmpf_add($r1, $r1, $r1),
where $r1 *is* the same reference to the same GMP structure,
would add $r1 to itself and store the result in $r1. Think of it
as $r1 += $r1. Otoh, Rmpf_add($r1, $r2, $r3), where each of the
arguments is a different reference to a different GMP structure
would add $r2 to $r3 and store the result in $r1. Think of it as
$r1 = $r2 + $r3. Mostly, the first argument is the argument that
stores the result and subsequent arguments provide the input values.
Exceptions to this can be found in some of the functions that
actually return a value.
Like I say, see the GMP manual for details. I hope it's
intuitively obvious or quickly becomes so. Also see the test
suite that comes with the distro for some examples of usage.
"$ui" means any integer that will fit into a C 'unsigned long int'.
"$si" means any integer that will fit into a C 'signed long int'.
"$double" means any number (not necessarily integer) that will fit
into a C 'double
"$bool" means a value (usually a 'signed long int') in which
the only interest is whether it's true or false.
"$str" simply means a string of symbols that represent a number,
eg "1234567890987654321234567@7" which might be a base 10 number,
or "zsa34760sdfgq123r5@11" which would have to represent at least
a base 36 number (because "z" is a valid digit only in bases 36
or higher). Valid bases for GMP numbers are 2 to 62 (inclusive).
########################
INITIALIZATION FUNCTIONS
Normally, a variable should be initialized once only or at least be
cleared, using `Rmpf_clear', between initializations.
'DESTROY' (which calls 'Rmpf_clear') is automatically called on
blessed objects whenever they go out of scope.
First read the section 'MEMORY MANAGEMENT' (above).
$bits = Rmpf_get_default_prec();
Return the current default default precision.
Rmpf_set_default_prec($bits);
Set the default precision to be *at least* $bits bits. All
subsequent calls to `Rmpf_init' will use this precision, but
previously initialized variables are unaffected.
$rop = Math::GMPf::new();
$rop = Math::GMPf->new();
$rop = new Math::GMPf();
$rop = Rmpf_init();
$rop = Rmpf_init_nobless();
Initialize $rop to 0. The precision of $rop is undefined
unless a default precision has already been established by
a call to `Rmpf_set_default_prec'.
$rop = Rmpf_init2($bits);
$rop = Rmpf_init2_nobless($bits);
Initialize $rop to 0 and set its precision to be
*at least* $bits bits.
$bits = Rmpf_get_prec($op);
Return the current precision of $op, in bits.
Rmpf_set_prec($rop, $bits);
Set the precision of $rop to be *at least* $bits bits.
The value in $rop will be truncated to the new precision.
This function requires internal reallocation of memory,
and so should not be used in a tight loop.
Rmpf_set_prec_raw($rop, $bits);
Set the precision of $rop to be *at least* $bits bits, without
changing the memory allocated. $bits must be no more than the
allocated precision for $rop, that being the precision when $rop
was initialized, or in the most recent `Rmpf_set_prec'.
The value in $rop is unchanged, and in particular if it had a
higher precision than $bits it will retain that higher precision
New values written to $rop will use the new value $bits.
Before calling `Rmpf_clear' (which will happen when a blessed
Math::GMPf object goes out of scope) or the full `Rmpf_set_prec',
another `Rmpf_set_prec_raw' call must be made to restore $rop to
its original allocated precision. Failing to do so will have
unpredictable results.
`Rmpf_get_prec' can be used before `Rmpf_set_prec_raw' to get the
original allocated precision. After `Rmpf_set_prec_raw' it
reflects the $bits value set.
`Rmpf_set_prec_raw' is an efficient way to use a Math::GMPf
object at different precisions during a calculation, perhaps to
gradually increase precision in an iteration, or just to use
various different precisions for different purposes during a
calculation.
####################
ASSIGNMENT FUNCTIONS
Rmpf_set($rop, $op);
Rmpf_set_ui($rop, $ui);
Rmpf_set_si($rop, $si);
Rmpf_set_d($rop, $double);
Rmpf_set_NV($rop, $nv); # $nv is $Config{nvtype}
Rmpf_set_IV($rop, $iv); # $iv is $Config{ivtype}
# (or $Config{uvtype}).
Rmpf_set_z($rop, $z); # $z is a Math::GMPz object.
Rmpf_set_q($rop, $q); # $q is a Math::GMPq object.
Set the value of $rop from the 2nd arg.
With Rmpf_set_IV, $iv must have its IOK flag set, or the
function will croak. Best to first check IOK_flag($iv), which
will return a non-zero value if and only if the IOK flag is set.
With Rmpf_set_NV, $nv must have its NOK flag set, or the
function will croak. Best to first check NOK_flag($nv), which
will return a non-zero value if and only if the NOK flag is set.
Rmpf_set_str($rop, $str, $base);
Set the value of $rop from the string in $str. The string is of
the form `M@N' or, if the base is 10 or less, alternatively
`MeN'. `M' is the mantissa and `N' is the exponent. The mantissa
is always in the specified base. The exponent is either in the
specified base or, if base is negative, in decimal.
The argument $base may be in the ranges 2 to 62, or -62 to -2.
Negative values are used to specify that the exponent is in
decimal. For bases up to 36, case is ignored; upper-case and
lower-case letters have the same value; for bases 37 to 62,
upper-case letter represent the usual 10..35 while lower-case
letter represent 36..61.
Unlike the corresponding mpz function, the base will not be
determined from the leading characters of the string if base is 0.
This is so that numbers like `0.23' are not interpreted as octal.
This function croaks if the entire string is not a valid number
in base $base.
Rmpf_swap($rop1, $rop2);
Swap $rop1 and $rop2. Both the values and the
precisions of the two variables are swapped.
######################################
COMBINED INITIALIZATION AND ASSIGNMENT
NOTE: Do NOT use these functions if $rop has already
been initialised. Instead use the Rmpz_set* functions
in 'Assignment Functions' (above)
First read the section 'MEMORY MANAGEMENT' (above).
$rop = Math::GMPf->new($arg);
$rop = Math::GMPf::new($arg);
$rop = new Math::GMPf($arg);
Returns a Math::GMPf object with the value of $arg, with default
precision. $arg can be either a number (signed integer, unsigned
integer, signed fraction or unsigned fraction) or a string that
represents a numeric value. If $arg is a string, an optional
additional argument that specifies the base of the number can
be supplied to new(). If $arg is a string and no additional
argument is supplied, base 10 is assumed.
The base may be in the ranges 2..62, -62..-2. Negative
values are used to specify that the exponent is in decimal.
$rop = Rmpf_init_set($op);
$rop = Rmpf_init_set_nobless($op);
$rop = Rmpf_init_set_ui($ui);
$rop = Rmpf_init_set_ui_nobless($ui);
$rop = Rmpf_init_set_si($si);
$rop = Rmpf_init_set_si_nobless($si);
$rop = Rmpf_init_set_d($double);
$rop = Rmpf_init_set_d_nobless($double);
$rop = Rmpf_init_set_IV($IV); # $IV is perl IV
$rop = Rmpf_init_set_IV_nobless($IV);
$rop = Rmpf_init_set_NV($NV); # $NV is perl NV
$rop = Rmpf_init_set_NV_nobless($NV);
Initialise $rop and assign to it the value held by
the functions argument. See the 'Rmpf_set*'
functions above.
$rop = Rmpf_init_set_str($str, $base);
$rop = Rmpf_init_set_str_nobless($str, $base);
Initialise $rop and assign to it the base $base
value represented by $str. See the 'Rmpf_set_str'
documentation above for details.
####################
CONVERSION FUNCTIONS
$double = Rmpf_get_d($op);
$double = Rmpf_get_d_rndn($op)
Convert $op to a 'double. Rmpf_get_d will truncate if necessary
(i.e. round towards zero). Rmpf_get_d_rndn will round to
nearest, ties to even.
$NV = Rmpf_get_NV($op); # $NV is $Config{nvtype}
$NV = Rmpf_get_NV_rndn($op); # $NV is $Config{nvtype}
Convert $op to an NV. Rmpf_get_NV will truncate if necessary
(i.e. round towards zero). Rmpf_get_NV_rndn will round to
nearest, ties to even.
YMMV if nvtype is the IBM DoubleDouble.
$si = Rmpf_get_si($op);
$ui = Rmpf_get_ui($op);
Convert $op to a `signed long' or `unsigned long',
truncating any fraction part. If $op is too big for
the return type, the result is undefined.
$IV = Rmpf_get_IV($op);
If $op (truncated to an integer value) fits into either an
IV or a UV return that IV/UV value of (truncated) $op.
Otherwise die with an appropriate error message. To find
find out if the truncated value of $op will fit, use the
'Rmpf_fits_IV_p' function.
($double, $exp) = Rmpf_get_d_2exp($op);
Find $double and $exp such that $double * (2 ** $exp),
with 0.5<=abs($double)<1, is a good approximation to $op.
This is similar to the standard C function `frexp'.
$str = Rmpf_get_str($op, $base, $digits);
Convert $op to a string of digits in base $base. $base can
be 2 to 62. Up to $digits digits will be generated.
Trailing zeros are not returned. No more digits than can be
accurately represented by $op are ever generated. If $digits
is 0 then that accurate maximum number of digits are generated.
($man, $exp) = Rmpf_deref2($op, $base, $digits);
Returns the mantissa to $man (as a string of digits, prefixed with
a minus sign if $op is negative), and returns the exponent to $exp.
There's an implicit decimal point to the left of the first digit in
$man. The third argument to Rmpf_deref2() specifies the number of
digits required to be output in the mantissa. No more digits than
can be accurately represented by $op are ever generated. If $digits
is 0 then that accurate maximum number of digits are generated
####################
ARITHMETIC FUNCTIONS
Rmpf_add($rop, $op1, $op2);
Rmpf_add_ui($rop, $op, $ui);
$rop = 2nd arg + 3rd arg.
Rmpf_sub($rop, $op1, $op2);
Rmpf_sub_ui($rop, $op, $ui);
Rmpf_ui_sub($rop, $ui, $op);
$rop = 2nd arg - 3rd arg.
Rmpf_mul($rop, $op1, $op2);
Rmpf_mul_ui($rop, $op, $ui);
$rop = 2nd arg * 3rd arg.
Rmpf_div($rop, $op1, $op2);
Rmpf_ui_div($rop, $ui, $op);
Rmpf_div_ui($rop, $op, $ui);
$rop = 2nd arg / 3rd arg.
Rmpf_sqrt($rop, $op);
Rmpf_sqrt_ui($rop, $ui);
$rop = 2nd arg ** 0.5.
Rmpf_pow_ui($rop, $op, $ui);
$ROP = $OP ** $ui.
Rmpf_neg($rop, $op);
$rop = -$op.
Rmpf_abs($rop, $op);
$rop = abs($op).
Rmpf_mul_2exp($rop, $op, $ui);
$rop = $op * (2 ** $ui).
Rmpf_div_2exp($rop, $op, $ui);
$rop = $op / (2 ** $ui).
####################
COMPARISON FUNCTIONS
$si = Rmpf_cmp ($op1, $op2);
$si = Rmpf_cmp_ui($op, $ui);
$si = Rmpf_cmp_si($op, $si);
$si = Rmpf_cmp_d ($op, $double);
$si = Rmpf_cmp_NV($op, $nv); # $nv is $Config{nvtype}
$si = Rmpf_cmp_IV($op, $iv); # $nv is $Config{ivtype}
Compare 1st arg and 2nd arg. Return a positive value if
1st arg > 2nd arg, zero if 1st arg = 2nd arg, and a
negative value if 1st arg < 2nd arg.
NOTE:
Rmpf_cmp_IV() requires that the 2nd argument has its IOK
flag set, and Rmpf_cmp_NV() requires that the 2nd
argument has its NOK flag set.
Otherwise these functions croak.
Suggestion: first check the status of the flag using
IOK_flag($iv) or NOK_flag($nv),which return a non-zero
value if and only if the flag in question is set.
Rmpf_eq($op1, $op2, $bits);
Return non-zero if the first $bits bits of $op1 and $op2
are equal, zero otherwise. I.e., test if $op1 and $op2
are approximately equal.
Caution: Currently only whole limbs are compared, and only in an
exact fashion.
Rmpf_reldiff($rop, $op1, $op2);
$rop = abs($op1 - $op2) / $op1.
$si = Rmpf_sgn($op);
Returns either +1 or -1 (or 0 if $op is zero).
##########################
INPUT AND OUTPUT FUNCTIONS
$bytes_read = Rmpf_inp_str($rop, $base);
BEST TO USE TRmpf_inp_str INSTEAD.
Read a string in base $base from STDIN, and put the read
float in $rop. The string is of the form `M@N' or, if
$base is 10 or less, alternatively `MeN'. `M' is the
mantissa and `N' is the exponent. The mantissa is always
in the specified base. The exponent is either in the
specified base or, if $base is negative,in decimal. The
decimal point expected is taken from the current locale,
on systems providing `localeconv'. The argument $base may
be in the ranges 2 to 36, or -36 to -2. Negative values
are used to specify that the exponent is in decimal.
Unlike the corresponding `Math::GMPz' function, the
base will not be determined from the leading characters
of the string if $base is 0. This is so that numbers
like `0.23' are not interpreted as octal.
$bytes_read = TRmpf_inp_str($rop, $stream, $base);
As for Rmpf_inp_str, except that there's the capability to read
from somewhere other than STDIN.
To read from STDIN:
TRmpf_inp_str($rop, *stdin, $base);
To read from an open filehandle (let's call it $fh):
TRmpf_inp_str($rop, \*$fh, $base);
$bytes_written = Rmpf_out_str([$prefix,] $op, $base, $digits [, $suffix]);
BEST TO USE TRmpf_out_str INSTEAD.
Print $op to stdout, as a string of digits. Return the number of
bytes written, or if an error occurred, return 0. The mantissa is
prefixed with an `0.' and is in the given base, which may vary
from 2 to 62 or from -2 to -36. An exponent is then printed,
separated by an `e', or if the base is greater than 10 then by an
`@'. The exponent is always in decimal. The decimal point follows
the current locale, on systems providing localeconv. For bases in
the range 2..36, digits and lower-case letters are used; for
-2..-36, digits and upper-case letters are used; for 37..62, digits,
upper-case letters, and lower-case letters (in that significance
order) are used. Up to $digits will be printed from the mantissa,
except that no more digits than are accurately representable by $op
will be printed. $digits can be 0 to select that accurate maximum.
The optional last argument ($suffix) is a string (eg "\n") that
will be appended to the output. The optional first argument
($prefix) is a string that will be prepended to the output. Note
that either none, one, or both, of $prefix and $suffix may be
supplied. ($bytes_written does not include the number of bytes in
$suffix and $prefix.)
$bytes_written = TRmpf_out_str([$prefix,] $stream, $base, $digits, $op, [, $suffix]);
As for Rmpf_out_str, except that there's the capability to print
to somewhere other than STDOUT. Note that the order of the args
is different (to match the order of the mpf_out_str args).
To print to STDERR:
TRmpf_out_str(*stderr, $base, $digits, $op);
To print to an open filehandle (let's call it $fh):
TRmpf_out_str(\*$fh, $base, $digits, $op);
#######################
MISCELLANEOUS FUNCTIONS
Rmpf_ceil($rop, $op);
Rmpf_floor($rop, $op);
Rmpf_trunc($rop, $op);
Set $rop to $op rounded to an integer. `Rmpf_ceil' rounds to the
next higher integer, `mpf_floor' to the next lower, and
`Rmpf_trunc' to the integer towards zero.
$bool = Rmpf_integer_p($op);
Return non-zero if $op is an integer.
$bool = Rmpf_fits_ulong_p($op);
$bool = Rmpf_fits_slong_p($op);
$bool = Rmpf_fits_uint_p($op);
$bool = Rmpf_fits_sint_p($op);
$bool = Rmpf_fits_ushort_p($op);
$bool = Rmpf_fits_sshort_p($op);
$bool = Rmpf_fits_IV_p($op); # fits into a perl IV
Return non-zero if OP would fit in the respective type, when
truncated to an integer.
$si = IOK_flag($sv); # $sv is a perl scalar variable.
$si = NOK_flag($sv);
$si = POK_flag($sv);
Return 0 if $sv's IOK/NOK/POK flag is unset.
Else return 1.
If the IsUV flag is set, then IOK_flag() returns 2, thereby indicating
that both the IOK and IsUV flags are set (and that the integer value
held by $sv should therefore be treated as unsigned).
$iv = Math::GMPf::nok_pokflag(); # not exported
Returns the value of the nok_pok flag. This flag is
initialized to zero, but incemented by 1 whenever a
scalar that is both a float (NOK) and string (POK) is passed
to new() or to an overloaded operator. The value of the flag
therefore tells us how many times such events occurred . The
flag can be reset to 0 by running clear_nok_pok().
Math::GMPf::set_nok_pok($iv); # not exported
Resets the nok_pok flag to the value specified by $iv.
Math::GMPf::clear_nok_pok(); # not exported
Resets the nok_pok flag to 0.(Essentially the same
as running set_nok_pok(0).)
#######################
RANDOM NUMBER FUNCTIONS
In the random number functions, @r is an array of
Math::GMPf objects (one for each random number that is
required). $how_many is the number of random numbers you
want and must be equal to scalar(@r). $bits is simply the
number of random bits required. Before calling the random
number functions, $state must be initialised and seeded.
$state = Math::GMPz::rand_init($op); # $op is the seed.
Without Math::GMPz, you can't use this function. (There are
better alternatives listed immediately below, anyway.)
Initialises and seeds $state, ready for use with the random
number functions. However, $state has not been blessed into
any package, and therefore does not get cleaned up when it
goes out of scope. To avoid memory leaks you therefore need
to call 'Math::GMPz::rand_clear($state);' once you have
finished with it and before it goes out of scope. Also, it
uses the default algorithm. Consider using the following
initialisation and seeding routines - they provide a choice of
algorithm, and there's no need to call rand_clear() when
you've finished with them.
$state = fgmp_randinit_default();
This is the Math::GMPf interface to the gmp library function
'gmp_randinit_default'.
$state is blessed into package Math::GMPf::Random and will be
automatically cleaned up when it goes out of scope.
Initialize $state with a default algorithm. This will be a
compromise between speed and randomness, and is recommended for
applications with no special requirements. Currently this is
the gmp_randinit_mt function (Mersenne Twister algorithm).
$state = fgmp_randinit_mt();
This is the Math::GMPf interface to the gmp library function
'gmp_randinit_mt'.
Currently identical to fgmp_randinit_default().
$state = fgmp_randinit_lc_2exp($mpz, $ui, $m2exp);
This is the Math::GMPf interface to the gmp library function
'gmp_randinit_lc_2exp'. $mpz is a Math::GMP or Math::GMPz object,
so one of those modules is required in order to make use of this
function.
$state is blessed into package Math::GMPf::Random and will be
automatically cleaned up when it goes out of scope.
Initialize $state with a linear congruential algorithm
X = ($mpz*X + $ui) mod (2 ** $m2exp). The low bits of X in this
algorithm are not very random. The least significant bit will have a
period no more than 2, and the second bit no more than 4, etc. For
this reason only the high half of each X is actually used.
When a random number of more than m2exp/2 bits is to be generated,
multiple iterations of the recurrence are used and the results
concatenated.
$state = fgmp_randinit_lc_2exp_size($ui);
This is the Math::GMPf interface to the gmp library function
'gmp_randinit_lc_2exp_size'.
$state is blessed into package Math::GMPf::Random and will be
automatically cleaned up when it goes out of scope.
Initialize state for a linear congruential algorithm as per
gmp_randinit_lc_2exp. a, c and m2exp are selected from a table,
chosen so that $ui bits (or more) of each X will be used,
ie. m2exp/2 >= $ui.
If $ui is bigger than the table data provides then the function fails
and dies with an appropriate error message. The maximum value for $ui
currently supported is 128.
$state2 = fgmp_randinit_set($state1);
This is the Math::GMPf interface to the gmp library function
'gmp_randinit_set'.
$state2 is blessed into package Math::GMPf::Random and will be
automatically cleaned up when it goes out of scope.
Initialize $state2 with a copy of the algorithm and state from
$state1.
$state = fgmp_randinit_default_nobless();
$state = fgmp_randinit_mt_nobless();
$state = fgmp_randinit_lc_2exp_nobless($mpz, $ui, $m2exp);
$state2 = fgmp_randinit_set_nobless($state1);
As for the above comparable function, but $state is not blessed into
any package. (Generally not useful - but they're available if you
want them.)
fgmp_randseed($state, $mpz); # $mpz is a Math::GMPz or Math::GMP object
fgmp_randseed_ui($state, $ui);
These are the Math::GMPz interfaces to the gmp library functions
'gmp_randseed' and 'gmp_randseed_ui'.
Seed an initialised (but not yet seeded) $state with $mpz/$ui.
Either Math::GMP or Math::GMPz is required for 'gmp_randseed'.
Rmpf_urandomb(@r, $state, $bits, $how_many);
Generate uniformly distributed random floats, all
between 0 and 1, with $bits significant bits in the mantissa.
Rmpf_random2(@r, $limbs, $exp, $how_many);
Generate random floats of at most $limbs limbs, with long
strings of zeros and ones in the binary representation.
The exponent of the number is in the interval -$exp to $exp.
This function is useful for testing functions and algorithms,
since this kind of random numbers have proven to be more
likely to trigger corner-case bugs. Negative random
numbers are generated when $limbs is negative.
$ui = fgmp_urandomb_ui($state, $bits);
This is the Math::GMPf interface to the gmp library function
'gmp_urandomb_ui'.
Return a uniformly distributed random number of $bits bits, ie. in
the range 0 to 2 ** ($bits - 1) inclusive. $bits must be less than or
equal to the number of bits in an unsigned long.
$ui2 = fgmp_urandomm_ui($state, $ui1);
This is the Math::GMPf interface to the gmp library function
'gmp_urandomm_ui'.
Return a uniformly distributed random number in the range 0 to
$ui1 - 1, inclusive.
fgmp_randclear($state);
Math::GMPz::rand_clear($state);
Destroys $state, as also does Math::GMPf::Random::DESTROY - three
identical functions.
Use only if $state is an unblessed object - ie if it was initialised
using Math::GMPz::rand_init() or one of the fgmp_randinit*_nobless
functions.
####################
OPERATOR OVERLOADING
Overloading works with numbers, strings (base 10 only),
Math::GMPf objects and, to a limited extent, Math::MPFR
objects (iff version 3.13 or later of Math::MPFR has been
installed). Strings are coerced into Math::GMPf objects
(with default precision).
The following operators are overloaded:
+ - * / ** sqrt (Return values have default precision)
+= -= *= /= **= ++ --(Precision remains unchanged)
< <= > >= == != <=>
!
abs (Return value has default precision)
int (on perl 5.8 only, NA on perl 5.6.
Return value has default precision.)
""
= (The copy that gets modified will have default precision.
The other copy retains the precision of the original)
NOTE: Making use of the '=' overloading is not recommended unless
you understand its caveats. See 'perldoc overload' and
read it thoroughly, including the documentation regarding
'copy constructors'.
Atempting to use the overloaded operators with objects that
have been blessed into some package other than 'Math::GMPf'
or 'Math::MPFR' (limited applications) will not work.
Math::MPFR objects can be used only with '+', '-', '*', '/'
and '**' operators, and will work only if Math::MPFR is at
version 3.13 or later - in which case the operation will
return a Math::MPFR object.
In those situations where the overload subroutine operates on 2
perl variables, then obviously one of those perl variables is
a Math::GMPf object. To determine the value of the other variable
the subroutine works through the following steps (in order),
using the first value it finds, or croaking if it gets
to step 6:
1. If the variable is a UV then that value is used. The variable
is considered to be a UV if the IOK and IsUV flags are set.
2. If the variable is an IV, then that value is used.
The variable is considered to be an IV if the IOK flag is set.
3. If the variable is a string (ie the POK flag is set) then the
base 10 value of that string is used. If the POK flag is set,
but the string is not a valid base 10 number, the subroutine
croaks with an appropriate error message.
4. If the variable is an NV, then that value is used. The
variable is considered to be a double if the NOK flag is set.
5. If the variable is a Math::GMPf object (or, for operators
specified above, a Math::MPFR object) then the value of that
object is used.
6. If none of the above is true, then the second variable is
deemed to be of an invalid type. The subroutine croaks with
an appropriate error message.
#####
OTHER
$GMP_version = Math::GMPf::gmp_v;
Returns the version of the GMP library (eg 4.1.3) being used by
Math::GMPf. The function is not exportable.
$GMP_cc = Math::GMPf::__GMP_CC;
$GMP_cflags = Math::GMPf::__GMP_CFLAGS;
If Math::GMPf has been built against gmp-4.2.3 or later,
returns respectively the CC and CFLAGS settings that were used
to compile the gmp library against which Math::GMPf was built.
(Values are as specified in the gmp.h that was used to build
Math::GMPf.)
Returns undef if Math::GMPf has been built against an earlier
version of the gmp library.
(These functions are in @EXPORT_OK and are therefore exportable
by request. They are not listed under the ":mpf" tag.)
$major = Math::GMPf::__GNU_MP_VERSION;
$minor = Math::GMPf::__GNU_MP_VERSION_MINOR;
$patchlevel = Math::GMPf::__GNU_MP_VERSION_PATCHLEVEL;
Returns respectively the major, minor, and patchlevel numbers
for the GMP library version used to build Math::GMPf. Values are
as specified in the gmp.h that was used to build Math::GMPf.
(These functions are in @EXPORT_OK and are therefore exportable
by request. They are not listed under the ":mpf" tag.)
################
FORMATTED OUTPUT
NOTE: The format specification can be found at:
http://gmplib.org/manual/Formatted-Output-Strings.html#Formatted-Output-Strings
However, the use of '*' to take an extra variable for width and
precision is not allowed in this implementation. Instead, it is
necessary to interpolate the variable into the format string - ie,
instead of:
Rmpf_printf("%*Zd\n", $width, $mpz);
we need:
Rmpf_printf("%${width}Zd\n", $mpz);
$si = Rmpf_printf($format_string, $var);
This function changed with the release of Math-GMPz-0.27.
Now (unlike the GMP counterpart), it is limited to taking 2
arguments - the format string, and the variable to be formatted.
That is, you can format only one variable at a time.
If there is no variable to be formatted, then the final arg
can be omitted - a suitable dummy arg will be passed to the XS
code for you. ie the following will work:
Rmpf_printf("hello world\n");
Returns the number of characters written, or -1 if an error
occurred.
$si = Rmpf_fprintf($fh, $format_string, $var);
This function (unlike the GMP counterpart) is limited to taking
3 arguments - the filehandle, the format string, and the variable
to be formatted. That is, you can format only one variable at a time.
If there is no variable to be formatted, then the final arg
can be omitted - a suitable dummy arg will be passed to the XS
code for you. ie the following will work:
Rmpf_fprintf($fh, "hello world\n");
Other than that, the rules outlined above wrt Rmpf_printf apply.
Returns the number of characters written, or -1 if an error
occurred.
$si = Rmpf_sprintf($buffer, $format_string, $var, $buflen);
This function (unlike the GMP counterpart) is limited to taking
4 arguments - the buffer, the format string, the variable to be
formatted and the size of the buffer. If there is no variable to
be formatted, then the third arg can be omitted - a suitable
dummy arg will be passed to the XS code for you. ie the following
will work:
Rmpf_sprintf($buffer, "hello world", 12);
$buffer must be large enough to accommodate the formatted string.
The formatted string is placed in $buffer.
Returns the number of characters written, or -1 if an error
occurred.
$si = Rmpf_snprintf($buffer, $bytes, $format_string, $var, $buflen);
Form a null-terminated string in $buffer. No more than $bytes
bytes will be written. To get the full output, $bytes must be
enough for the string and null-terminator. $buffer must be large
enough to accommodate the string and null-terminator, and is
truncated to the length of that string (and null-terminator).
The return value is the total number of characters which ought
to have been produced, excluding the terminating null.
If $si >= $bytes then the actual output has been truncated to
the first $bytes-1 characters, and a null appended.
This function (unlike the GMP counterpart) is limited to taking
5 arguments - the buffer, the maximum number of bytes to be
returned, the format string, the variable to be formatted and
the size of the buffer.
If there is no variable to be formatted, then the 4th arg can
be omitted - a suitable dummy arg will be passed to the XS code
for you. ie the following will work:
Rmpf_snprintf($buffer, 6, "hello world", 12);
###############################
###############################
BUGS
You can get segfaults if you pass the wrong type of argument to the functions - so if you get a segfault, the first thing to do is to check that the argument types you have supplied are appropriate.
LICENSE
This program is free software; you may redistribute it and/or modify it under the same terms as Perl itself. Copyright 2006-2021 Sisyphus
AUTHOR
Sisyphus <sisyphus at(@) cpan dot (.) org>
| 2022-02-28 | perl v5.32.1 |
Visit the GSP FreeBSD Man Page Interface.
Output converted with ManDoc.