widget or undef = Gtk2::ImageView->new

black bg : FALSE

fitting : TRUE

image tool : a Gtk2::ImageView::Tool::Dragger instance

interpolation mode : GDK_INTERP_BILINEAR

offset : (0, 0)

pixbuf : NULL

show cursor: TRUE

show frame : TRUE

transp : GTK_IMAGE_TRANSP_GRID

zoom : 1.0

boolean = $view->get_black_bg

$view->set_black_bg ($black_bg)

•

$black_bg (boolean)

If TRUE, the view uses a black background. If FALSE, the view uses the default (normally gray) background.

The default value is FALSE.

list = $view->get_check_colors

$view->damage_pixels ($rect)

•

$rect (Gtk2::Gdk::Rectangle)

Mark the pixels in the rectangle as damaged. That the pixels are damaged means that they have been modified and that the view must redraw them to ensure that the visible part of the image corresponds to the pixels in that image. Calling this method emits the ::pixbuf-changed signal.

This method must be used when modifying the image data:

    // Drawing something cool in the area 20,20 - 60,60 here...
    ...
    // And force an update
    $view->damage_pixels (Gtk2::Gdk::Rectangle->new(20, 20, 40, 40);

If the whole pixbuf has been modified then rect should be NULL to indicate that a total update is needed.

See also gtk_image_view_set_pixbuf().

view : a Gtk2::ImageView

view : a Gtk2::Gdk::Rectangle in image space coordinates to mark as damaged or NULL, to mark the whole pixbuf as damaged.

rectangle = $view->get_draw_rect

For example, if the widgets allocated size is 100, 100 and the pixbufs size is 50, 50 and the zoom factor is 1.0, then the pixbuf will be drawn centered on the widget. rect will then be (25,25)-[50,50].

This method is useful when converting from widget to image or zoom space coordinates.

boolean = $view->get_fitting

$view->set_fitting ($fitting)

•

$fitting (boolean)

Sets whether to fit or not. If TRUE, then the view will adapt the zoom so that the whole pixbuf is visible.

Setting the fitting causes the widget to immediately repaint itself.

Fitting is by default TRUE.

view : a Gtk2::ImageView

fitting : whether to fit the image or not

rectangle = $view->image_to_widget_rect ($rect_in)

•

$rect_in (Gtk2::Gdk::Rectangle)

Converts a rectangle in image space coordinates to widget space coordinates. If the view is not realized, or if it contains no pixbuf, then the conversion was unsuccessful, FALSE is returned and rect_out is left unmodified.

Note that this function may return a rectangle that is not visible on the widget.

interptype = $view->get_interpolation

$view->set_interpolation ($interp)

•

$interp (Gtk2::Gdk::InterpType)

Sets the interpolation mode of how the view. GDK_INTERP_HYPER is the slowest, but produces the best results. GDK_INTERP_NEAREST is the fastest, but provides bad rendering quality. GDK_INTERP_BILINEAR is a good compromise.

Setting the interpolation mode causes the widget to immidiately repaint itself.

The default interpolation mode is GDK_INTERP_BILINEAR.

view : a Gtk2::ImageView

interp : The Gtk2::Gdk::InterpType to use. One of GDK_INTERP_NEAREST, GDK_INTERP_BILINEAR and GDK_INTERP_HYPER.

string = Gtk2::ImageView->library_version

$view->set_offset ($x, $y, $invalidate=FALSE)

• $x (double)
• $y (double)
• $invalidate (boolean)

Sets the offset of where in the image the GtkImageView should begin displaying image data.

The offset is clamped so that it will never cause the GtkImageView to display pixels outside the pixbuf. Setting this attribute causes the widget to repaint itself if it is realized.

If invalidate is TRUE, the views entire area will be invalidated instead of redrawn immidiately. The view is then queued for redraw, which means that additional operations can be performed on it before it is redrawn.

The difference can sometimes be important like when you are overlaying data and get flicker or artifacts when setting the offset. If that happens, setting invalidate to TRUE could fix the problem. See the source code to GtkImageToolSelector for an example.

Normally, invalidate should always be FALSE because it is much faster to repaint immidately than invalidating.

view : a Gtk2::ImageView

x : X-component of the offset in zoom space coordinates.

y : Y-component of the offset in zoom space coordinates.

invalidate : whether to invalidate the view or redraw immediately, default=FALSE.

pixbuf or undef = $view->get_pixbuf

$view->set_pixbuf ($pixbuf, $reset_fit=TRUE)

• $pixbuf (Gtk2::Gdk::Pixbuf or undef)
• $reset_fit (boolean)

Sets the pixbuf to display, or NULL to not display any pixbuf. Normally, reset_fit should be TRUE which enables fitting. Which means that, initially, the whole pixbuf will be shown.

Sometimes, the fit mode should not be reset. For example, if GtkImageView is showing an animation, it would be bad to reset the fit mode for each new frame. The parameter should then be FALSE which leaves the fit mode of the view untouched.

This method should not be used if merely the contents of the pixbuf has changed. See gtk_image_view_damage_pixels() for that.

If reset_fit is TRUE, the zoom-changed signal is emitted, otherwise not. The pixbuf-changed signal is also emitted.

The default pixbuf is NULL.

view : a Gtk2::ImageView

pixbuf : The pixbuf to display.

reset_fit : Whether to reset fitting or not.

boolean = $view->get_show_cursor

$view->set_show_cursor ($show_cursor)

•

$show_cursor (boolean)

Sets whether to show the mouse cursor when the mouse is over the widget or not. Hiding the cursor is useful when the widget is fullscreened.

The default value is TRUE.

view : a Gtk2::ImageView

show_cursor : whether to show the cursor or not

boolean = $view->get_show_frame

$view->set_show_frame ($show_frame)

•

$show_frame (boolean)

Sets whether to draw a frame around the image or not. When TRUE, a one pixel wide frame is shown around the image. Setting this attribute causes the widget to immediately repaint itself.

The default value is TRUE.

tool = $view->get_tool

$view->set_tool ($tool)

•

$tool (Gtk2::ImageView::Tool)

Set the image tool to use. If the new tool is the same as the current tool, then nothing will be done. Otherwise Gtk2::ImageView::Tool::pixbuf_changed() is called so that the tool has a chance to generate initial data for the pixbuf.

Setting the tool causes the widget to immediately repaint itself.

The default image tool is a Gtk2::ImageView::Tool::Dragger instance. See also Gtk2::ImageView::Tool.

view : a Gtk2::ImageView

tool : The image tool to use (must not be NULL)

$view->set_transp ($transp, $transp_color=0x000000)

• $transp (Gtk2::ImageView::Transp)
• $transp_color (integer)

Sets how the view should draw transparent parts of images with an alpha channel. If transp is GTK_IMAGE_TRANSP_COLOR, the specified color will be used. Otherwise the transp_color argument is ignored. If it is GTK_IMAGE_TRANSP_BACKGROUND, the background color of the widget will be used. If it is GTK_IMAGE_TRANSP_GRID, then a grid with light and dark gray boxes will be drawn on the transparent parts.

Calling this method causes the widget to immediately repaint. It also causes the pixbuf-changed signal to be emitted. This is done so that other widgets (such as GtkImageNav) will have a chance to render a view of the pixbuf with the new transparency settings.

view : a Gtk2::ImageView

transp : The Gtk2::ImageView::Transp to use when drawing transparent images, default GTK_IMAGE_TRANSP_GRID.

transp_color : Color to use when drawing transparent images, default 0x000000.

rectangle = $view->get_viewport

The current viewport is defined as the rectangle, in zoomspace coordinates as the area of the loaded pixbuf the Gtk2::ImageView is currently showing.

double = $view->get_zoom

$view->zoom_in

view : a Gtk2::ImageView

$view->zoom_out

view : a Gtk2::ImageView

$view->set_zoom ($zoom)

•

$zoom (double)

Sets the zoom of the view.

Fitting is always disabled after this method has run. The zoom-changed signal is unconditionally emitted.

view : a Gtk2::ImageView

zoom : the new zoom factor

enum Gtk2::Gdk::InterpType

• 'nearest' / 'GDK_INTERP_NEAREST'
• 'tiles' / 'GDK_INTERP_TILES'
• 'bilinear' / 'GDK_INTERP_BILINEAR'
• 'hyper' / 'GDK_INTERP_HYPER'

enum Gtk2::Gdk::ScrollDirection

• 'up' / 'GDK_SCROLL_UP'
• 'down' / 'GDK_SCROLL_DOWN'
• 'left' / 'GDK_SCROLL_LEFT'
• 'right' / 'GDK_SCROLL_RIGHT'

enum Gtk2::ImageView::Transp

• 'color' / 'GTK_IMAGE_TRANSP_COLOR'
• 'background' / 'GTK_IMAGE_TRANSP_BACKGROUND'
• 'grid' / 'GTK_IMAGE_TRANSP_GRID'

enum Gtk2::ScrollType

• 'none' / 'GTK_SCROLL_NONE'
• 'jump' / 'GTK_SCROLL_JUMP'
• 'step-backward' / 'GTK_SCROLL_STEP_BACKWARD'
• 'step-forward' / 'GTK_SCROLL_STEP_FORWARD'
• 'page-backward' / 'GTK_SCROLL_PAGE_BACKWARD'
• 'page-forward' / 'GTK_SCROLL_PAGE_FORWARD'
• 'step-up' / 'GTK_SCROLL_STEP_UP'
• 'step-down' / 'GTK_SCROLL_STEP_DOWN'
• 'page-up' / 'GTK_SCROLL_PAGE_UP'
• 'page-down' / 'GTK_SCROLL_PAGE_DOWN'
• 'step-left' / 'GTK_SCROLL_STEP_LEFT'
• 'step-right' / 'GTK_SCROLL_STEP_RIGHT'
• 'page-left' / 'GTK_SCROLL_PAGE_LEFT'
• 'page-right' / 'GTK_SCROLL_PAGE_RIGHT'
• 'start' / 'GTK_SCROLL_START'
• 'end' / 'GTK_SCROLL_END'