NAME

SYNOPSIS

#include <liblogging/stdlog.h>
const char* stdlog_version(void);
int stdlog_init(int options);
void stdlog_deinit();
stdlog_channel_t stdlog_open(const char *ident,
          const int options, const int facility,
          const char *channelspec);
int stdlog_log(stdlog_channel_t channel, const int severity,
               const char *fmt, ...);
int stdlog_log_b(stdlog_channel_t channel, const int severity,
               char *buf, const size_t lenbuf,
               const char *fmt, ...);
int stdlog_vlog(stdlog_channel_t channel, const int severity,
               const char *fmt, va_list ap);
int stdlog_vlog_b(stdlog_channel_t channel, const int severity,
               char *buf, const size_t lenbuf,
               const char *fmt, va_list ap);
void stdlog_close(stdlog_channel_t channel);
size_t stdlog_get_msgbuf_size(void);
const char *stdlog_get_dflt_chanspec(void);

DESCRIPTION

stdlog_init() is used to initialize the logging system. It must only be called once during the lifetime of a process. If no special options are desired, stdlog_init() is optional. If it is not called, the first call to any of the other calls will initiate it. This feature is primarily for backward compatibility with how the legacy syslog(3) API worked. It does not play well with multi-threaded applications. With them, call stdlog_init() explicitly from the startup thread. The parameter options contains one or more of the library options specified in their own section below.

stdlog_deinit(void) is used to clean up resources including closing file handles at library exit. No library calls are permitted after it has been called. It's usage is optional if no cleanup is required (this will leave resource leaks which will be reported by tools like valgrind).

stdlog_open() is used to open a log channel which can be used in consecutive calls to stdlog_log(). The string given to ident is used to identify the message source. It's handling is depending on the output driver. For example, the file: and syslog: drivers prepend it to the message, while the journal: driver ignores it (as the journal automatically identifies messages based on the application who submits them. In general, you can think of it as being equivalent to the ident specified in the traditional openlog(3) call. The value given in options controls handling of the channel. It can be used to override options set during stdlog_init(). Note that for signal-safeness you need to specify STDLOG_SIGSAFE. The facility field contains a facility similar to the traditional syslog facility. Again, it is driver-dependent on how this field is actually used. The channelspec filed is a channel specification string, which allows to control the destination of this channel. To use the default output channel specification, provide NULL to channelspec. Doing so is highly suggested if there is no pressing need to do otherwise.

stdlog_close() is used to close the associated channel. The channel specifier must not be used after stdlog_close() has been called. If done so, unpredictable behavior will happen, as the memory it points to has been free'ed.

stdlog_log() is the equivalent to the syslog(3) call. It offers a similar interface, but there are notable differences. The channel parameter is used to specify the log channel to use to. Use NULL to select the default channel. This is sufficient for most applications. The severity field contains a syslog-like severity. The remaining arguments are a format, as in printf(3) and any arguments required by the format. Note that some restrictions apply to the format in signal-safe mode (described below). The stdlog_log() supports log message sizes of slightly less than 4KiB. The exact size depends on the log driver and parameters specified in stdlog_open(). The reason is that the log drivers may need to add headers and trailers to the message text, and this is done inside the same 4KiB buffer that is also used for the actual message text. For example, the "syslog:" driver adds a traditional syslog header, which among others contains the ident string provided by stdlog_open(). If the complete log message does not fit into the buffer, it is silently truncated. The formatting buffer is allocated on the stack.

Note that the 4Kib buffer size is a build time default. As such, distributions may change it. To obtain the size limit that the linked in instance of libloggin-stdlog was build with, use stdlog_get_msgbuf_size(). You may also use the stdlogctl(1) utility to find out the build time settings for the installed version of liblogging-stdlog.

stdlog_log_b() is almost equivalent to stdlog_log(), except that the caller can provide a formatting work buffer. This is done via the buf and buflen parameters. This permits to use both smaller and larger buffer sizes. For embedded systems (or signal handlers), this may be convenient to reduce the amount of stack space required. Also, it is useful if very large messages are to be logged. Note that while there is no upper limit on the buffer size per se, the log drivers may have some limits. In general, up to 64KiB of buffer should work with all drivers.

The stdlog_vlog() and stdlog_vlog_b() calls are equivalent to stdlog_log() and stdlog_log_b() except that they take a va_list argument.

Use stdlog_get_dflt_chanspec() to obtain the default channel specification. This must be called only after stdlog_init() has been called.

OPTIONS

The following options can be given:

FACILITIES

STDLOG_KERN     - kernel messages
STDLOG_USER     - random user-level messages
STDLOG_MAIL     - mail system
STDLOG_DAEMON   - system daemons
STDLOG_AUTH     - security/authorization messages
STDLOG_SYSLOG   - messages generated internally by syslogd
STDLOG_LPR      - line printer subsystem
STDLOG_NEWS     - network news subsystem
STDLOG_UUCP     - UUCP subsystem
STDLOG_CRON     - clock daemon
STDLOG_AUTHPRIV - security/authorization messages (private)
STDLOG_FTP      - ftp daemon
STDLOG_LOCAL0   - reserved for application use
STDLOG_LOCAL1   - reserved for application use
STDLOG_LOCAL2   - reserved for application use
STDLOG_LOCAL3   - reserved for application use
STDLOG_LOCAL4   - reserved for application use
STDLOG_LOCAL5   - reserved for application use
STDLOG_LOCAL6   - reserved for application use
STDLOG_LOCAL7   - reserved for application use

Regular applications should use facilities in the STDLOG_LOCALx range. Non-privileged applications may not be able to use all of the system-defined facilities. Note that it is also safe to refer to application specific facilities via

STDLOG_LOCAL0 + offset

if offset is in the range of 0 to 7.

SEVERITY

STDLOG_EMERG   - system is unusable
STDLOG_ALERT   - action must be taken immediately
STDLOG_CRIT    - critical conditions
STDLOG_ERR     - error conditions
STDLOG_WARNING - warning conditions
STDLOG_NOTICE  - normal but significant condition
STDLOG_INFO    - informational
STDLOG_DEBUG   - debug-level messages

These reflect the traditional syslog severity mappings. Note that different output drivers may have different needs and may map severities into a smaller set.

THREAD- AND SIGNAL-SAFENESS

These calls are not thread- or signal-safe:

For stdlog_log(), stdlog_vlog(), stdlog_log_b(), and stdlog_vlog_b(), it depends:

For stdlog_log_b() and stdlog_vlog_b() the caller must also ensure that the provided formatting buffer supports the desired thread- and signal-safeness. For example, if a static buffer is used, thread-safeness is not given. For signal-safeness, typically a buffer allocated on the signal handler's stack is needed.

For multi-threaded applications, it is highly recommended to initialize the library via stdlog_init() on the main thread before any other threads are started.

Thread- and signal-safeness, if given, does not require different channels. It is perfectly fine to use the same channel in multiple threads. Note however that interrupted system calls will not be retried. An error will be returned instead. This may happen if a thread is inside a stdlog_log() call while an async signal handler using that same call is activated. Depending on timing, the first call may or may not complete successfully. It is the caller's chore to check return status and do retries if necessary.

Finally, thread- and signal-safeness depend on the log driver. At the time of this writing, the "syslog:" and "file:" drivers are thread- and signal-safe while the current "journal:" driver is thread- but not signal-safe. To the best of our knowledge, the systemd team is working on making the API we depend on signal-safe. If this is done, the driver itself is also signal-safe (the restriction results from the journal API).

CHANNEL SPECIFICATIONS

If no channel specification is given, the default is "syslog:". The default channel can be set via the LIBLOGGING_STDLOG_DFLT_LOG_CHANNEL environment variable.

Not all output channel drivers are available on all platforms. For example, the "journal:" driver is not available on BSD. It is highly suggested that application developers never hard-code any channel specifiers inside their code but rather permit the administrator to configure these. If there is no pressing need to select different channel drivers, it is suggested to rely on the default channel spec, which always can be set by the system administrator.

RETURN VALUE

Note that the traditional syslog(3) API does not return any success state, so any failures are silently ignored. In most cases, this works sufficiently reliably. If this level of reliability is sufficient, the return code of stdlog_log() does not need to be checked. This is probably the case for most applications.

If finding out about the success of the logging operation is vital to the application, the return code can be checked. Note that you must not try to find out the exact failure cause. If the return is non-zero, something in the log system did not work correctly. It is suggested that the logging operation is re-tried in this case, and if it fails again it is suggested that the channel is closed and re-opened and then the operation re-tried. During failures, partial records may be logged. This is the same what could happen with syslog(3). Again, in general it should not be necessary to check the return code of stdlog_log().

The stdlog_deinit() and stdlog_close() calls do not return any status.

EXAMPLES

stdlog_log(NULL, STDLOG_NOTICE, "New session %d of user %s",
           sessid, username);

Being thread- and signal-safe requires a little bit more of setup:

/* on main thread */
status = stdlog_init(STDLOG_SIGSAFE);
/* here comes the rest of the code, including worker
 * thread startup.
 */
/* And do this in threads, signal handlers, etc: */
stdlog_log(NULL, STDLOG_NOTICE, "New session %d of user %s",
           sessid, username);

If you need just a small formatting buffer (or a large one), you can provide the memory yourself:

char buf[512];
stdlog_log_b(NULL, STDLOG_NOTICE, buf, sizeof(buf),
             "New session %d of user %s", sessid, username);

SEE ALSO

COPYRIGHT

AUTHOR