Default behavior

    use List::SomeUtils ':all';

    use List::SomeUtils qw{ any firstidx };

Because historical changes to the API might make upgrading List::SomeUtils difficult for some projects, the legacy API is available via special import tags.

Junctions

There are two schools of thought for how to evaluate a junction on an empty list:

• Reduction to an identity (boolean)
• Result is undefined (three-valued)

In the first case, the result of the junction applied to the empty list is determined by a mathematical reduction to an identity depending on whether the underlying comparison is "or" or "and". Conceptually:

                    "any are true"      "all are true"
                    --------------      --------------
    2 elements:     A || B || 0         A && B && 1
    1 element:      A || 0              A && 1
    0 elements:     0                   1

In the second case, three-value logic is desired, in which a junction applied to an empty list returns "undef" rather than true or false

Junctions with a "_u" suffix implement three-valued logic. Those without are boolean.

all BLOCK LIST

all_u BLOCK LIST

Returns a true value if all items in LIST meet the criterion given through BLOCK. Sets $_ for each item in LIST in turn:

  print "All values are non-negative"
    if all { $_ >= 0 } ($x, $y, $z);

For an empty LIST, "all" returns true (i.e. no values failed the condition) and "all_u" returns "undef".

Thus, "all_u(@list)" is equivalent to "@list ? all(@list) : undef".

Note: because Perl treats "undef" as false, you must check the return value of "all_u" with "defined" or you will get the opposite result of what you expect.

any BLOCK LIST

any_u BLOCK LIST

Returns a true value if any item in LIST meets the criterion given through BLOCK. Sets $_ for each item in LIST in turn:

  print "At least one non-negative value"
    if any { $_ >= 0 } ($x, $y, $z);

For an empty LIST, "any" returns false and "any_u" returns "undef".

Thus, "any_u(@list)" is equivalent to "@list ? any(@list) : undef".

none BLOCK LIST

none_u BLOCK LIST

Logically the negation of "any". Returns a true value if no item in LIST meets the criterion given through BLOCK. Sets $_ for each item in LIST in turn:

  print "No non-negative values"
    if none { $_ >= 0 } ($x, $y, $z);

For an empty LIST, "none" returns true (i.e. no values failed the condition) and "none_u" returns "undef".

Thus, "none_u(@list)" is equivalent to "@list ? none(@list) : undef".

Note: because Perl treats "undef" as false, you must check the return value of "none_u" with "defined" or you will get the opposite result of what you expect.

notall BLOCK LIST

notall_u BLOCK LIST

Logically the negation of "all". Returns a true value if not all items in LIST meet the criterion given through BLOCK. Sets $_ for each item in LIST in turn:

  print "Not all values are non-negative"
    if notall { $_ >= 0 } ($x, $y, $z);

For an empty LIST, "notall" returns false and "notall_u" returns "undef".

Thus, "notall_u(@list)" is equivalent to "@list ? notall(@list) : undef".

one BLOCK LIST

one_u BLOCK LIST

Returns a true value if precisely one item in LIST meets the criterion given through BLOCK. Sets $_ for each item in LIST in turn:

    print "Precisely one value defined"
        if one { defined($_) } @list;

Returns false otherwise.

For an empty LIST, "one" returns false and "one_u" returns "undef".

The expression "one BLOCK LIST" is almost equivalent to "1 == true BLOCK LIST", except for short-cutting. Evaluation of BLOCK will immediately stop at the second true value.

Transformation

Makes a copy of the list and then passes each element from the copy to the BLOCK. Any changes or assignments to $_ in the BLOCK will only affect the elements of the new list. However, if $_ is a reference then changes to the referenced value will be seen in both the original and new list.

This function is similar to "map" but will not modify the elements of the input list:

  my @list = (1 .. 4);
  my @mult = apply { $_ *= 2 } @list;
  print "\@list = @list\n";
  print "\@mult = @mult\n";
  __END__
  @list = 1 2 3 4
  @mult = 2 4 6 8

Think of it as syntactic sugar for

  for (my @mult = @list) { $_ *= 2 }

Note that you must alter $_ directly inside BLOCK in order for changes to make effect. New value returned from the BLOCK are ignored:

  # @new is identical to @list.
  my @new = apply { $_ * 2 } @list;

  # @new is different from @list
  my @new = apply { $_ =* 2 } @list;

insert_after BLOCK VALUE LIST

Inserts VALUE after the first item in LIST for which the criterion in BLOCK is true. Sets $_ for each item in LIST in turn.

  my @list = qw/This is a list/;
  insert_after { $_ eq "a" } "longer" => @list;
  print "@list";
  __END__
  This is a longer list

insert_after_string STRING VALUE LIST

Inserts VALUE after the first item in LIST which is equal to STRING.

  my @list = qw/This is a list/;
  insert_after_string "a", "longer" => @list;
  print "@list";
  __END__
  This is a longer list

pairwise BLOCK ARRAY1 ARRAY2

Evaluates BLOCK for each pair of elements in ARRAY1 and ARRAY2 and returns a new list consisting of BLOCK's return values. The two elements are set to $a and $b. Note that those two are aliases to the original value so changing them will modify the input arrays.

  @a = (1 .. 5);
  @b = (11 .. 15);
  @x = pairwise { $a + $b } @a, @b;     # returns 12, 14, 16, 18, 20

  # mesh with pairwise
  @a = qw/a b c/;
  @b = qw/1 2 3/;
  @x = pairwise { ($a, $b) } @a, @b;    # returns a, 1, b, 2, c, 3

mesh ARRAY1 ARRAY2 [ ARRAY3 ... ]

zip ARRAY1 ARRAY2 [ ARRAY3 ... ]

Returns a list consisting of the first elements of each array, then the second, then the third, etc, until all arrays are exhausted.

Examples:

  @x = qw/a b c d/;
  @y = qw/1 2 3 4/;
  @z = mesh @x, @y;         # returns a, 1, b, 2, c, 3, d, 4

  @a = ('x');
  @b = ('1', '2');
  @c = qw/zip zap zot/;
  @d = mesh @a, @b, @c;   # x, 1, zip, undef, 2, zap, undef, undef, zot

"zip" is an alias for "mesh".

uniq LIST

distinct LIST

Returns a new list by stripping duplicate values in LIST by comparing the values as hash keys, except that undef is considered separate from ''. The order of elements in the returned list is the same as in LIST. In scalar context, returns the number of unique elements in LIST.

  my @x = uniq 1, 1, 2, 2, 3, 5, 3, 4; # returns 1 2 3 5 4
  my $x = uniq 1, 1, 2, 2, 3, 5, 3, 4; # returns 5
  # returns "Mike", "Michael", "Richard", "Rick"
  my @n = distinct "Mike", "Michael", "Richard", "Rick", "Michael", "Rick"
  # returns '', undef, 'S1', A5'
  my @s = distinct '', undef, 'S1', 'A5'
  # returns '', undef, 'S1', A5'
  my @w = uniq undef, '', 'S1', 'A5'

"distinct" is an alias for "uniq".

RT#49800 can be used to give feedback about this behavior.

singleton

Returns a new list by stripping values in LIST occurring more than once by comparing the values as hash keys, except that undef is considered separate from ''. The order of elements in the returned list is the same as in LIST. In scalar context, returns the number of elements occurring only once in LIST.

  my @x = singleton 1,1,2,2,3,4,5 # returns 3 4 5

Partitioning

Returns a list of the values of LIST after (and not including) the point where BLOCK returns a true value. Sets $_ for each element in LIST in turn.

  @x = after { $_ % 5 == 0 } (1..9);    # returns 6, 7, 8, 9

after_incl BLOCK LIST

Same as "after" but also includes the element for which BLOCK is true.

before BLOCK LIST

Returns a list of values of LIST up to (and not including) the point where BLOCK returns a true value. Sets $_ for each element in LIST in turn.

before_incl BLOCK LIST

Same as "before" but also includes the element for which BLOCK is true.

part BLOCK LIST

Partitions LIST based on the return value of BLOCK which denotes into which partition the current value is put.

Returns a list of the partitions thusly created. Each partition created is a reference to an array.

  my $i = 0;
  my @part = part { $i++ % 2 } 1 .. 8;   # returns [1, 3, 5, 7], [2, 4, 6, 8]

You can have a sparse list of partitions as well where non-set partitions will be undef:

  my @part = part { 2 } 1 .. 10;            # returns undef, undef, [ 1 .. 10 ]

Be careful with negative values, though:

  my @part = part { -1 } 1 .. 10;
  __END__
  Modification of non-creatable array value attempted, subscript -1 ...

Negative values are only ok when they refer to a partition previously created:

  my @idx  = ( 0, 1, -1 );
  my $i    = 0;
  my @part = part { $idx[$i++ % 3] } 1 .. 8; # [1, 4, 7], [2, 3, 5, 6, 8]

Iteration

Creates an array iterator to return the elements of the list of arrays ARRAY1, ARRAY2 throughout ARRAYn in turn. That is, the first time it is called, it returns the first element of each array. The next time, it returns the second elements. And so on, until all elements are exhausted.

This is useful for looping over more than one array at once:

  my $ea = each_array(@a, @b, @c);
  while ( my ($a, $b, $c) = $ea->() )   { .... }

The iterator returns the empty list when it reached the end of all arrays.

If the iterator is passed an argument of '"index"', then it returns the index of the last fetched set of values, as a scalar.

each_arrayref LIST

Like each_array, but the arguments are references to arrays, not the plain arrays.

natatime EXPR, LIST

Creates an array iterator, for looping over an array in chunks of $n items at a time. (n at a time, get it?). An example is probably a better explanation than I could give in words.

Example:

  my @x = ('a' .. 'g');
  my $it = natatime 3, @x;
  while (my @vals = $it->())
  {
    print "@vals\n";
  }

This prints

  a b c
  d e f
  g

Searching

Performs a binary search on LIST which must be a sorted list of values. BLOCK must return a negative value if the current element (stored in $_) is smaller, a positive value if it is bigger and zero if it matches.

Returns a boolean value in scalar context. In list context, it returns the element if it was found, otherwise the empty list.

bsearchidx BLOCK LIST

bsearch_index BLOCK LIST

Performs a binary search on LIST which must be a sorted list of values. BLOCK must return a negative value if the current element (stored in $_) is smaller, a positive value if it is bigger and zero if it matches.

Returns the index of found element, otherwise "-1".

"bsearch_index" is an alias for "bsearchidx".

firstval BLOCK LIST

first_value BLOCK LIST

Returns the first element in LIST for which BLOCK evaluates to true. Each element of LIST is set to $_ in turn. Returns "undef" if no such element has been found.

"first_value" is an alias for "firstval".

onlyval BLOCK LIST

only_value BLOCK LIST

Returns the only element in LIST for which BLOCK evaluates to true. Sets $_ for each item in LIST in turn. Returns "undef" if no such element has been found.

"only_value" is an alias for "onlyval".

lastval BLOCK LIST

last_value BLOCK LIST

Returns the last value in LIST for which BLOCK evaluates to true. Each element of LIST is set to $_ in turn. Returns "undef" if no such element has been found.

"last_value" is an alias for "lastval".

firstres BLOCK LIST

first_result BLOCK LIST

Returns the result of BLOCK for the first element in LIST for which BLOCK evaluates to true. Each element of LIST is set to $_ in turn. Returns "undef" if no such element has been found.

"first_result" is an alias for "firstres".

onlyres BLOCK LIST

only_result BLOCK LIST

Returns the result of BLOCK for the first element in LIST for which BLOCK evaluates to true. Sets $_ for each item in LIST in turn. Returns "undef" if no such element has been found.

"only_result" is an alias for "onlyres".

lastres BLOCK LIST

last_result BLOCK LIST

Returns the result of BLOCK for the last element in LIST for which BLOCK evaluates to true. Each element of LIST is set to $_ in turn. Returns "undef" if no such element has been found.

"last_result" is an alias for "lastres".

indexes BLOCK LIST

Evaluates BLOCK for each element in LIST (assigned to $_) and returns a list of the indices of those elements for which BLOCK returned a true value. This is just like "grep" only that it returns indices instead of values:

  @x = indexes { $_ % 2 == 0 } (1..10);   # returns 1, 3, 5, 7, 9

firstidx BLOCK LIST

first_index BLOCK LIST

Returns the index of the first element in LIST for which the criterion in BLOCK is true. Sets $_ for each item in LIST in turn:

  my @list = (1, 4, 3, 2, 4, 6);
  printf "item with index %i in list is 4", firstidx { $_ == 4 } @list;
  __END__
  item with index 1 in list is 4

Returns "-1" if no such item could be found.

"first_index" is an alias for "firstidx".

onlyidx BLOCK LIST

only_index BLOCK LIST

Returns the index of the only element in LIST for which the criterion in BLOCK is true. Sets $_ for each item in LIST in turn:

    my @list = (1, 3, 4, 3, 2, 4);
    printf "uniqe index of item 2 in list is %i", onlyidx { $_ == 2 } @list;
    __END__
    unique index of item 2 in list is 4

Returns "-1" if either no such item or more than one of these has been found.

"only_index" is an alias for "onlyidx".

lastidx BLOCK LIST

last_index BLOCK LIST

Returns the index of the last element in LIST for which the criterion in BLOCK is true. Sets $_ for each item in LIST in turn:

  my @list = (1, 4, 3, 2, 4, 6);
  printf "item with index %i in list is 4", lastidx { $_ == 4 } @list;
  __END__
  item with index 4 in list is 4

Returns "-1" if no such item could be found.

"last_index" is an alias for "lastidx".

Sorting

Returns the list of values sorted according to the string values returned by the KEYFUNC block or function. A typical use of this may be to sort objects according to the string value of some accessor, such as

  sort_by { $_->name } @people

The key function is called in scalar context, being passed each value in turn as both $_ and the only argument in the parameters, @_. The values are then sorted according to string comparisons on the values returned. This is equivalent to

  sort { $a->name cmp $b->name } @people

except that it guarantees the name accessor will be executed only once per value. One interesting use-case is to sort strings which may have numbers embedded in them "naturally", rather than lexically.

  sort_by { s/(\d+)/sprintf "%09d", $1/eg; $_ } @strings

This sorts strings by generating sort keys which zero-pad the embedded numbers to some level (9 digits in this case), helping to ensure the lexical sort puts them in the correct order.

nsort_by BLOCK LIST

Similar to sort_by but compares its key values numerically.

Counting and calculation

Counts the number of elements in LIST for which the criterion in BLOCK is true. Sets $_ for each item in LIST in turn:

  printf "%i item(s) are defined", true { defined($_) } @list;

false BLOCK LIST

Counts the number of elements in LIST for which the criterion in BLOCK is false. Sets $_ for each item in LIST in turn:

  printf "%i item(s) are not defined", false { defined($_) } @list;

minmax LIST

Calculates the minimum and maximum of LIST and returns a two element list with the first element being the minimum and the second the maximum. Returns the empty list if LIST was empty.

The "minmax" algorithm differs from a naive iteration over the list where each element is compared to two values being the so far calculated min and max value in that it only requires 3n/2 - 2 comparisons. Thus it is the most efficient possible algorithm.

However, the Perl implementation of it has some overhead simply due to the fact that there are more lines of Perl code involved. Therefore, LIST needs to be fairly big in order for "minmax" to win over a naive implementation. This limitation does not apply to the XS version.

mode LIST

Calculates the most common items in the list and returns them as a list. This is effectively done by string comparisons, so references will be stringified. If they implement string overloading, this will be used.

If more than one item appears the same number of times in the list, all such items will be returned. For example, the mode of a unique list is the list itself.

This function returns a list in list context. In scalar context it returns a count indicating the number of modes in the list.

Tassilo von Parseval

Brian McCauley suggested the inclusion of apply() and provided the pure-Perl implementation for it.

Eric J. Roode asked me to add all functions from his module "List::SomeUtil" into this one. With minor modifications, the pure-Perl implementations of those are by him.

The bunch of people who almost immediately pointed out the many problems with the glitchy 0.07 release (Slaven Rezic, Ron Savage, CPAN testers).

A particularly nasty memory leak was spotted by Thomas A. Lowery.

Lars Thegler made me aware of problems with older Perl versions.

Anno Siegel de-orphaned each_arrayref().

David Filmer made me aware of a problem in each_arrayref that could ultimately lead to a segfault.

Ricardo Signes suggested the inclusion of part() and provided the Perl-implementation.

Robin Huston kindly fixed a bug in perl's MULTICALL API to make the XS-implementation of part() work.

Jens Rehsack

Special thanks goes to David Golden who spent a lot of effort to develop a design to support current state of CPAN as well as ancient software somewhere in the dark. He also contributed a lot of patches to refactor the API frontend to welcome any user of List::SomeUtils - from ancient past to recently last used.

Toby Inkster provided a lot of useful feedback for sane importer code and was a nice sounding board for API discussions.

Peter Rabbitson provided a sane git repository setup containing entire package history.