NAME

VERSION

SYNOPSIS

  use Mail::Audit; # or use Mail::Audit qw(...plugins...);
 
  my $mail = Mail::Audit->new( emergency => "~/emergency_mbox");
 
  $mail->pipe("listgate p5p")            if $mail->from =~ /perl5-porters/;
  $mail->accept("perl")                  if $mail->from =~ /perl/;
  $mail->reject("We do not accept spam") if $mail->rblcheck();
  $mail->ignore                          if $mail->subject =~ /boring/i;
 
  $mail->noexit(1);
  $mail->accept("~/Mail/Archive/%Y%m%d");
  $mail->noexit(0);
 
  $mail->accept()

DESCRIPTION

Mail::Audit was inspired by Tom Christiansen's audit_mail and deliverlib programs. It allows a piece of email to be logged, examined, accepted into a mailbox, filtered, resent elsewhere, rejected, replied to, and so on. It's designed to allow you to easily create filter programs to stick in a .forward file or similar.

Mail::Audit groks MIME; when appropriate, it subclasses MIME::Entity. Read the MIME::Tools man page for details.

CONSTRUCTOR

new

  my $mail = Mail::Audit->new(%option)
    

The constructor reads a mail message from "STDIN" (or, if the "data" option is set, from an array reference or \*GLOBref) and creates a "Mail::Audit" object from it.

Other options include the "accept", "reject" or "pipe" keys, which specify subroutine references to override the methods with those names.

You are encouraged to specify an "emergency" argument and check for the appearance of messages in that mailbox on a regular basis. If for any reason an "accept()" is unsuccessful, the message will be saved to the "emergency" mailbox instead. If no "emergency" mailbox is defined, messages will be deferred back to the MTA, where they will show up in your mailq.

You may also specify "log => $logfile" to write a debugging log. If you don't specify a log file, logs will be written to ~/mail-audit.log. You can set the verbosity of the log with the "loglevel" key. A higher loglevel will result in more lines being logged. The default level is 3. To get all internally generated logs, log at level 5. To get none, log at -1.

Usually, the delivery methods "accept", "pipe", and "resend" are final; Mail::Audit will terminate when they are done. If you specify "noexit => 1", "Mail::Audit" will not exit after completing the above actions, but continue running your script.

The "reject" delivery method is always final; "noexit" has no effect.

If you just want to print the message to STDOUT, $mail->print().

Percent (%) signs seen in arguments to "accept" and "pipe" do not undergo "strftime" interpolation by default. If you want this, use the "interpolate_strftime" option. You can override the "global" interpolate_strftime option by passing an overriding option to "accept" and "pipe".

By default, MIME messages are automatically recognized and parsed. This is potentially expensive; if you don't want MIME parsing, use the "nomime" option.

You can pass further MIME options in the "mimeoptions" variable: for example, if you want to output_to_core (man MIME::Parser) set "mimeoptions => {output_to_core=>1}".

DELIVERY METHODS

accept

  $mail->accept(\%option, @locations);
    

You can choose to accept the mail into a mailbox by calling the "accept" method; with no argument, this accepts to /var/mail/you. The mailbox is opened append-write, then locked "LOCK_EX", the mail written and then the mailbox unlocked and closed. If Mail::Audit sees that you have a maildir style system, where /var/mail/you is a directory, it'll deliver in maildir style. If the path you specify does not exist, Mail::Audit will assume mbox, unless it ends in /, which means maildir.

If multiple maildirs are given, Mail::Audit will use hardlinks to deliver to them, so that multiple hardlinks point to the same underlying file. (If the maildirs turn out to be on multiple filesystems, you get multiple files.)

If you don't want the "new/cur/tmp" structure of a classical maildir, set the one_for_all option, and you'll still get the unique filenames.

  accept( dir1, dir2, ..., { one_for_all => 1 });
    

If you want "%" signs to be expanded according to strftime(3), you can pass "accept" the option "interpolate_strftime":

  accept( file1, file2, ..., { interpolate_strftime => 1 });
    

"interpolate_strftime" is not enabled by default for two reasons: backward compatibility (though nobody I know has a % in any mail folder name) and username interpolation: many people like to save messages by their correspondent's username, and that username may contain a % sign. If you are one of these people, you should

  $username =~ s/%/%%/g;
    

If your arguments contain "/", "accept" will create arbitarily deep subdirectories accordingly. Untaint your input by saying

  $username =~ s,/,-,g;
    

By default, "accept" is final; Mail::Audit will terminate after successfully accepting the message. If you want to keep going, set "noexit". "accept" will return the filename(s) that it saved to.

  my  @pathnames = accept(file1, file2, ..., { noexit => 1 });
  my ($pathname) = accept(file1);
    

If for any reason "accept" is unable to write the message (eg. you're over quota), Mail::Audit will attempt delivery to the "emergency" mailbox. If "accept" was called with multiple destinations, the "emergency" action will only be taken if the message couldn't be delivered to any of the desired destinations. By default the "emergency" mailbox is set to the system mailbox. If we were unable to save to the emergency mailbox, the message will be deferred back into the MTA's queue. This happens whether or not "noexit" is set, so if you observe that some of your "accept"s somehow aren't getting run, check your mailq.

If this isn't how you want local delivery to happen, you'll need to override this method.

reject

  $mail->reject($reason);
    

This rejects the email; it will be bounced back to the sender as undeliverable. If a reason is given, this will be included in the bounce.

This is a final delivery method. The "noexit" option has no effect here.

resend

  $mail->resend($address, \%option)
    

Reinjects the email in its entirety to another address, using SMTP.

This is a final delivery method. Set "noexit" if you want to keep going.

Other options are all optional, and include host, port, and debug; see "smtpsend" in Mail::Internet

At this time this method is not overrideable by an argument to "new".

pipe

  $mail->pipe($program)
    

This opens a pipe to an external program and feeds the mail to it.

This is a final delivery method. Set "noexit" if you want to keep going. If "noexit" is set, the exit status of the pipe is returned.

ignore

  $mail->ignore;
    

This merely ignores the email, dropping it into the bit bucket for eternity.

This is a final delivery method. Set "noexit" if you want to keep going. (Calling ignore with "noexit" set is pretty pointless.)

reply

  $mail->reply(%option);
    

Sends an autoreply to the sender of the message. Return value: the recipient address of the reply.

Recognized content-related options are: from, subject, cc, bcc, body. The "To" field defaults to the incoming message's "Reply-To" and "From" fields. "body" should be a single multiline string.

Set the option "EVEN_IF_FROM_DAEMON" to send a reply even if the original message was from some sort of automated agent. What that set, only X-Loop will stop loops.

If you use this method, use KillDups to keep track of who you've autoreplied to, so you don't autoreply more than once.

 use Mail::Audit qw(KillDups);
 $mail->reply(body=>"I am on vacation") if not $self->killdups($mail->from);
    

"reply" is not considered a final delivery method, so execution will continue after completion.

HEADER MANAGEMENT METHODS

get_header

get

  my $header = $mail->get($header);
    

Retrieves the named header from the mail message.

add_header

put_header

  $mail->add_header($header => $value);
    

Inserts a new header into the mail message with the given value. "put_header" is an alias for this method.

replace_header

  $mail->replace_header($header => $value);
    

Removes the old header, adds a new one.

delete_header

  $mail->delete_header($header);
    

Guess.

MISCELLANEOUS METHODS

log

  $mail->log($priority => $message);
    

This method logs the given message if $priority is greater than the loglevel given during construction.

tidy

  $mail->tidy;
    

Tidies up the email as per Mail::Internet. If the message is a MIME message, nothing happens.

noexit

  $mail->noexit($bool);
    

This method sets the value of "noexit". If "noexit" is true, final delivery methods will not be considered final.

ATTRIBUTE METHODS

• from
• to
• subject
• cc
• bcc
• received
• body

  Returns a reference to an array of lines in the body of the email.

• header

  Returns the header as a single string.

• is_mime

  Am I a MIME message? If so, MIME::Entity methods apply. Otherwise, Mail::Internet methods apply.

• from_mailer

  Am I from a mailer-daemon? See procmailrc. This method returns the part of the header that matched. This method's implementation of the pattern is not identical to procmail's.

• from_daemon

  Am I from any sort of daemon? See procmailrc. This method returns the part of the header that matched. This method's implementation of the pattern is not identical to procmail's.

BUGS

CAVEATS

HISTORY

Meng Weng Wong <mengwong@pobox.com> turned a petite demure v2.0 into a raging bloated v2.1, adding MIME support, emergency recovery, filename interpolation, and autoreply features.

Ricardo SIGNES <rjbs@cpan.org> took over after Meng and tried to tame the beast, refactoring, documenting, and testing. Thanks to Listbox.com for sponsoring maintenance of this module!

SEE ALSO

• <http://www.perl.com/pub/a/2001/07/17/mailfiltering.html>
• Mail::Internet
• Mail::SMTP
• Mail::Audit::List
• Mail::Audit::PGP
• Mail::Audit::MAPS
• Mail::Audit::KillDups
• Mail::Audit::Razor
• Mail::Audit::Vacation

AUTHORS

• Simon Cozens
• Meng Weng Wong
• Ricardo SIGNES

COPYRIGHT AND LICENSE

This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.