evals and "PDL::NiceSlice"

  $a = sequence 10;
  eval << 'EOE';

  use PDL::NiceSlice;
  $b = $a(0:5);

  EOE
  print $b;

Instead say:

  use PDL::NiceSlice;
  $a = sequence 10;
  eval << 'EOE';

  $b = $a(0:5);

  EOE
  print $b;

Source filters must be executed at compile time to be effective. And "PDL::NiceFilter" is just a source filter (although it is not necessarily obvious for the casual user).

Parentheses following a scalar variable name

  $a(1:4) .= 2;         # only use this syntax on piddles
  $sum += $a(,(1));

However, if the variable name is immediately preceded by a "&", for example

  &$a(4,5);

it will not be interpreted as a slicing expression. Rather, to avoid interfering with the current subref syntax, it will be treated as an invocation of the code reference $a with argumentlist "(4,5)".

The $a(ARGS) syntax collides in a minor way with the perl syntax. In particular, ``foreach $var(LIST)'' appears like a PDL slicing call. NiceSlice avoids translating the ``for $var(LIST)'' and ``foreach $var(LIST)'' constructs for this reason. Since you can't use just any old lvalue expression in the 'foreach' 'for' constructs -- only a real perl scalar will do -- there's no functionality lost. If later versions of perl accept ``foreach <lvalue-expr> (LIST)'', then you can use the code ref syntax, below, to get what you want.

The default method syntax

  $a->xchg(0,1)->(($pos)) .= 0;

Note that this conflicts with the use of normal code references, since you can write in plain Perl

  $sub = sub { print join ',', @_ };
  $sub->(1,'a');

NOTE: Once "use PDL::NiceSlice" is in effect (you can always switch it off with a line "no PDL::NiceSlice;" anywhere in the script) the source filter will incorrectly replace the above call to $sub with an invocation of the slicing method. This is one of the pitfalls of using a source filter that doesn't know anything about the runtime type of a variable (cf. the Implementation section).

This shouldn't be a major problem in practice; a simple workaround is to use the "&"-way of calling subrefs, e.g.:

  $sub = sub { print join ',', @_ };
  &$sub(1,'a');

When to use which syntax?

  $a->xchg(0,1)(0);

won't work. It can only be used directly following a valid perl variable name. Instead, use the default method syntax in such cases:

  $a->xchg(0,1)->(0);

Similarly, if you have a list of piddles @pdls:

  $b = $pdls[5]->(0:-1);

The argument list

  $a($pos-1:$end,myfunc(1,3)) .= 5;

There can even be other slicing commands in the arglist:

  $a(0:-1:$pdl($step)) *= 2;

NOTE: If you use function calls in the arglist make sure that you use parentheses around their argument lists. Otherwise the source filter will get confused since it splits the argument list on commas that are not protected by parentheses. Take the following example:

  sub myfunc { return 5*$_[0]+$_[1] }
  $a = sequence 10;
  $sl = $a(0:myfunc 1, 2);
  print $sl;
 PDL barfed: Error in slice:Too many dims in slice
 Caught at file /usr/local/bin/perldl, line 232, pkg main

The simple fix is

  $sl = $a(0:myfunc(1, 2));
  print $sl;
 [0 1 2 3 4 5 6 7]

Note that using prototypes in the definition of myfunc does not help. At this stage the source filter is simply not intelligent enough to make use of this information. So beware of this subtlety.

Another pitfall to be aware of: currently, you can't use the conditional operator in slice expressions (i.e., "?:", since the parser confuses them with ranges). For example, the following will cause an error:

  $a = sequence 10;
  $b = rand > 0.5 ? 0 : 1; # this one is ok
  print $a($b ? 1 : 2);    # error !
 syntax error at (eval 59) line 3, near "1,

For the moment, just try to stay clear of the conditional operator in slice expressions (or provide us with a patch to the parser to resolve this issue ;).

Modifiers

    $pdl(<slice>;<modifier>)

Four modifiers are currently implemented:

• "_" : flatten the piddle before applying the slice expression. Here is an example

     $b = sequence 3, 3;
     print $b(0:-2;_); # same as $b->flat->(0:-2)
   [0 1 2 3 4 5 6 7]
      

  which is quite different from the same slice expression without the modifier

     print $b(0:-2);
   [
    [0 1]
    [3 4]
    [6 7]
   ]
      

• "|" : sever the link to the piddle, e.g.

     $a = sequence 10;
     $b = $a(0:2;|)++;  # same as $a(0:2)->sever++
     print $b;
   [1 2 3]
     print $a; # check if $a has been modified
   [0 1 2 3 4 5 6 7 8 9]
      

• "?" : short hand to indicate that this is really a where expression

  As expressions like

    $a->where($a>5)
      

  are used very often you can write that shorter as

    $a($a>5;?)
      

  With the "?"-modifier the expression preceding the modifier is not really a slice expression (e.g. ranges are not allowed) but rather an expression as required by the where method. For example, the following code will raise an error:

    $a = sequence 10;
    print $a(0:3;?);
   syntax error at (eval 70) line 3, near "0:"
      

  That's about all there is to know about this one.

• "-" : squeeze out any singleton dimensions. In less technical terms: reduce the number of dimensions (potentially) by deleting all dims of size 1. It is equivalent to doing a reshape(-1). That can be very handy if you want to simplify the results of slicing operations:

    $a = ones 3, 4, 5;
    $b = $a(1,0;-); # easier to type than $a((1),(0))
    print $b->info;
   PDL: Double D [5]
      

  It also provides a unique opportunity to have smileys in your code! Yes, PDL gives new meaning to smileys.

Combining modifiers

  $c = $a(0;-|); # squeeze and sever

Other combinations are just as useful, e.g. ";_|" to flatten and sever. The sequence in which modifiers are specified is not important.

A notable exception is the "where" modifier ("?") which must not be combined with other flags (let me know if you see a good reason to relax this rule).

Repeating any modifier will raise an error:

  $c = $a(-1:1;|-|); # will cause error
 NiceSlice error: modifier | used twice or more

Modifiers are still a new and experimental feature of "PDL::NiceSlice". I am not sure how many of you are actively using them. Please do so and experiment with the syntax. I think modifiers are very useful and make life a lot easier. Feedback is welcome as usual. The modifier syntax will likely be further tuned in the future but we will attempt to ensure backwards compatibility whenever possible.

Argument formats

• ranges

  You can access ranges using the usual ":" separated format:

    $a($start:$stop:$step) *= 4;
      

  Note that you can omit the trailing step which then defaults to 1. Double colons ("::") are not allowed to avoid clashes with Perl's namespace syntax. So if you want to use steps different from the default you have to also at least specify the stop position. Examples:

    $a(::2);   # this won't work (in the way you probably intended)
    $a(:-1:2); # this will select every 2nd element in the 1st dim
      

  Just as with slice negative indices count from the end of the dimension backwards with "-1" being the last element. If the start index is larger than the stop index the resulting piddle will have the elements in reverse order between these limits:

    print $a(-2:0:2);
   [8 6 4 2 0]
      

  A single index just selects the given index in the slice

    print $a(5);
   [5]
      

  Note, however, that the corresponding dimension is not removed from the resulting piddle but rather reduced to size 1:

    print $a(5)->info
   PDL: Double D [1]
      

  If you want to get completely rid of that dimension enclose the index in parentheses (again similar to the slice syntax):

    print $a((5));
   5
      

  In this particular example a 0D piddle results. Note that this syntax is only allowed with a single index. All these will be errors:

    print $a((0,4));  # will work but not in the intended way
    print $a((0:4));  # compile time error
      

  An empty argument selects the whole dimension, in this example all of the first dimension:

    print $a(,(0));
      

  Alternative ways to select a whole dimension are

    $a = sequence 5, 5; 
    print $a(:,(0));
    print $a(0:-1,(0));
    print $a(:-1,(0));
    print $a(0:,(0));
      

  Arguments for trailing dimensions can be omitted. In that case these dimensions will be fully kept in the sliced piddle:

    $a = random 3,4,5;
    print $a->info;
   PDL: Double D [3,4,5]
    print $a((0))->info;
   PDL: Double D [4,5]
    print $a((0),:,:)->info;  # a more explicit way
   PDL: Double D [4,5]
    print $a((0),,)->info;    # similar
   PDL: Double D [4,5]
      

• dummy dimensions

  As in slice, you can insert a dummy dimension by preceding a single index argument with '*'. A lone '*' inserts a dummy dimension of order 1; a '*' followed by a number inserts a dummy dimension of that order.

• piddle index lists

  The second way to select indices from a dimension is via 1D piddles of indices. A simple example:

    $a = random 10;
    $idx = long 3,4,7,0;
    $b = $a($idx);
      

  This way of selecting indices was previously only possible using dice ("PDL::NiceSlice" attempts to unify the "slice" and "dice" interfaces). Note that the indexing piddles must be 1D or 0D. Higher dimensional piddles as indices will raise an error:

    $a = sequence 5, 5;
    $idx2 = ones 2,2;
    $sum = $a($idx2)->sum;
   piddle must be <= 1D at /home/XXXX/.perldlrc line 93
      

  Note that using index piddles is not as efficient as using ranges. If you can represent the indices you want to select using a range use that rather than an equivalent index piddle. In particular, memory requirements are increased with index piddles (and execution time may be longer). That said, if an index piddle is the way to go use it!

As you might have expected ranges and index piddles can be freely mixed in slicing expressions:

  $a = random 5, 5;
  $b = $a(-1:2,pdl(3,0,1));

piddles as indices in ranges

  $a = sequence 5, 5;
  $rg = pdl(1,-1,3);
  print $a($rg(0):$rg(1):$rg(2),2);
 [
  [11 14]
 ]
  print $a($rg+1,:$rg(0));
 [
  [2 0 4]
  [7 5 9]
 ]

The next one raises an error

  print $a($rg+1,:$rg(0:1));
 multielement piddle where only one allowed at XXX/Core.pm line 1170.

The problem is caused by using the 2-element piddle "$rg(0:1)" as the stop index in the second argument ":$rg(0:1)" that is interpreted as a range by "PDL::NiceSlice". You can use multielement piddles as index piddles as described above but not in ranges. And "PDL::NiceSlice" treats any expression with unprotected ":"'s as a range. Unprotected means as usual "not occurring between matched parentheses".

Conditional operator

The "DATA" file handle

Possible interaction with Inline::Pdlpp

    # use with Inline modules
  use PDL;
  use PDL::NiceSlice;
  use Inline Pdlpp;

  $a = sequence(10);
  print $a(0:5);

  __END__

  __Pdlpp__

  ... inline stuff

Otherwise switch "PDL::NiceSlice" explicitly off around the Inline::Pdlpp code:

  use PDL::NiceSlice;

  $a = sequence 10;
  $a(0:3)++;
  $a->inc;

  no PDL::NiceSlice; # switch off before Pdlpp code
  use Inline Pdlpp => "Pdlpp source code";

The cleaner solution is to always stick with the "DATA" way of including your "Inline" code as in the first example. That way you keep your nice Perl code at the top and all the ugly Pdlpp stuff etc at the bottom.

Bug reports