NAME

SYNOPSIS

 *** Probes ***

 +SSH

 binary = /usr/bin/ssh-keyscan # mandatory
 forks = 5
 offset = 50%
 step = 300
 timeout = 15

 # The following variables can be overridden in each target section
 /^influx_.+/ = influx_location = In the basement
 keytype = dsa
 pings = 5
 port = 5000

 # [...]

 *** Targets ***

 probe = SSH # if this should be the default probe

 # [...]

 + mytarget
 # probe = SSH # if the default probe is something else
 host = my.host
 /^influx_.+/ = influx_location = In the basement
 keytype = dsa
 pings = 5
 port = 5000

DESCRIPTION

The Probe asks the given host n-times for it's public key, where n is the amount specified in the config File.

As part of the initialization, the probe asks 127.0.0.1 for it's public key and tries to parse the output. Make sure you have SSH running on the localhost as well.

VARIABLES

binary

The location of your ssh-keyscan binary.

Example value: /usr/bin/ssh-keyscan

This setting is mandatory.

forks

Run this many concurrent processes at maximum

Example value: 5

Default value: 5

offset

If you run many probes concurrently you may want to prevent them from hitting your network all at the same time. Using the probe-specific offset parameter you can change the point in time when each probe will be run. Offset is specified in % of total interval, or alternatively as 'random', and the offset from the 'General' section is used if nothing is specified here. Note that this does NOT influence the rrds itself, it is just a matter of when data acquisition is initiated. (This variable is only applicable if the variable 'concurrentprobes' is set in the 'General' section.)

Example value: 50%

step

Duration of the base interval that this probe should use, if different from the one specified in the 'Database' section. Note that the step in the RRD files is fixed when they are originally generated, and if you change the step parameter afterwards, you'll have to delete the old RRD files or somehow convert them. (This variable is only applicable if the variable 'concurrentprobes' is set in the 'General' section.)

Example value: 300

timeout

How long a single 'ping' takes at maximum

Example value: 15

Default value: 5

Supported target-specific variables:

/^influx_.+/

This is a tag that will be sent to influxdb and has no impact on the probe measurement. The tag name will be sent without the "influx_" prefix, which will be replaced with "tag_" instead. Tags can be used for filtering.

Example value: influx_location = In the basement

keytype

Type of key, used in ssh-keyscan -t keytype

Example value: dsa

Default value: rsa

pings

How many pings should be sent to each target, if different from the global value specified in the Database section. Note that the number of pings in the RRD files is fixed when they are originally generated, and if you change this parameter afterwards, you'll have to delete the old RRD files or somehow convert them.

Example value: 5

port

Port to use when testing the ssh connection -p port

Example value: 5000

Default value: 22

AUTHORS