format()

• prefix

  The prefix of any links. In HTML mode, this is the path to the Wiki. The actual linked item itself will be appended to the prefix. This is useful to create full URIs:

          { prefix => 'http://example.com/wiki.pl?page=' }
      

• extended

  A boolean flag, false by default, to use extended linking semantics. This comes from the Everything Engine (http://everydevel.com/), which marks links with square brackets. An optional title may occur after the link target, preceded by an open pipe. These are valid extended links:

          [a valid link]
          [link|title]
      

  Where the linking semantics of the destination format allow it, the result will display the title instead of the URI. In HTML terms, the title is the content of an "A" element (not the content of its "HREF" attribute).

  You can use delimiters other than single square brackets for marking extended links by passing a value for "extended_link_delimiters" in the %tags hash when calling "format".

• implicit_links

  A boolean flag, true by default, to create links from StudlyCapsStringsNote that if you disable this flag, you should probably enable the "extended" one also, or there will be no way of creating links in your documents. To disable it, use the pair:

          { implicit_links => 0 }
      

• absolute_links

  A boolean flag, false by default, which treats any links that are absolute URIs (such as http://www.cpan.org/) specially. Any prefix will not apply and the URIs aren't quoted. Use this in conjunction with the "extended" option to detect the link.

  A link is any text that starts with a known schema followed by a colon and one or more non-whitespace characters. This is a distinct subset of what URI recognizes as a URI, but is a good first-order approximation. If you need to recognize more complex URIs, use the standard wiki formatting explained earlier.

  The recognized schemas are those defined in the "schema" value in the %tags hash. The defaults are "http", "https", "ftp", "mailto", and "gopher".

• nofollow_extended

  When used with the "extended" flag, any extended links will be turned into HTML tags with the "rel="nofollow"" attribute. By default, this option is off.

Wiki Format

Lists are indented text, by one tab or four spaces by default. You may disable indentation. In unordered lists, where each item has its own bullet point, each item needs a leading asterisk and space. Ordered lists consist of items marked with combination of one or more alphanumeric characters followed by a period and an optional space. Any indented text without either marking is code, handled literally. You can nest lists.

The following is valid Wiki formatting, with an extended link as marked.

        = my interesting text =

        ANormalLink
        [let the Sun shine|AnExtendedLink]

        == my interesting lists ==

            * unordered one
            * unordered two

            1. ordered one
            2. ordered two
                        a. nested one
                        b. nested two

            code one
            code two

        The first line of a normal paragraph.
        The second line of a normal paragraph.  Whee.

Tags

Line items

There are two classes of line items: simple tags, and tags that contain data. The simple tags are "newline" and "line". The module inserts a newline tag whenever it encounters a newline character ("\n"). It inserts a line tag whenever four or more dash characters ("----") occur at the start of a line. No whitespace is allowed. These default to the <br> and <hr> HTML tags, respectively. To override either, simply pass tags such as:

        my $html = format($text, { newline => "\n" });

The three line items are more complex, and require subroutine references. This category includes the "strong" and "emphasized" tags as well as "link"s. The first argument passed to the subref will be the data found in between the marks. The second argument is the $opts hash reference. The default action for a strong tag is equivalent to:

        my $html = format($text, { strong => sub { "<b>$_[0]</b>" } });

As of version 0.70, you can change the regular expressions used to find strong and emphasized tags:

        %tags = (
                strong_tag     => qr/\*(.+?)\*/,
                emphasized_tag => qr|(?<!<)/(.+?)/|,
        );

        $wikitext = 'this is *strong*, /emphasized/, and */emphasized strong/*';
        $htmltext = Text::WikiFormat::format( $wikitext, \%tags, {} );

Be aware that using forward slashes to mark anything leads to the hairy regular expression -- use something else. This interface is experimental and may change if I find something better. It's nice to be able to override those tags, though.

Finally, there are "extended_link_delimiters", which allow you to use delimiters other than single square brackets for marking extended links. Pass the tags as:

        my $html = format( $text, { extended_link_delimiters => [ '[[', ']]' ] });

This allows you to use double square brackets as UseMod supports:

        [[an extended link]]
        [[a titled extended link|title]]

Blocks

There are five default block types: "paragraph", "header", "code", "unordered", and "ordered". The parser usually finds these by indentation, either one or more tabs or four or more whitespace characters. (This does not include newlines, however.) Any line that does not fall in any of these three categories is a "paragraph".

Code, unordered, and ordered blocks do not require indentation, but the parser uses it to control nesting in lists. Be careful. To mark a block as requiring indentation, use the "indented" tag, which contains a reference to a hash:

        my $html = format($text, { 
                indented    => { map { $_ => 1 } qw( ordered unordered code )}
        });

Block entries in the tag hashes must contain array references. The first two items are the tags used at the start and end of the block. The last items contain the tags used at the start and end of each line. Where there needs to be more processing of individual lines, use a subref as the third item. This is how the module numbers ordered lines in HTML lists:

        my $html = format($text, { ordered => [ '<ol>', "</ol>\n",
                sub { qq|<li value="$_[2]">$_[0]</li>\n| } ] });

The first argument to these subrefs is the post-processed text of the line itself. (Processing removes the indentation and tokens used to mark this as a list and checks the rest of the line for other line formattings.) The second argument is the indentation level. The subsequent arguments are captured variables in the regular expression used to find this list type. The regexp for ordered lists is:

        qr/^([\dA-Za-z]+)\.\s*/;

The module processes indentation first, if applicable, and stores the indentation level (the length of the indentation removed). The line must contain one or more alphanumeric character followed by a single period and optional whitespace to be an ordered list item. The module saves the contents of this last group, the value of the list item, and passes it to the subref as the third argument.

Lists automatically start and end as necessary.

Because of the indentation issue, there is a specific blocks processing in a specific order. The "blockorder" tag governs this order. It contains a reference to an array of the names of the appropriate blocks to process. If you add a block type, be sure to add an entry for it in "blockorder":

        my $html = format($text, {
                escaped       => [ '', '', '', '' ],
                blocks        => {
                        invisible => qr!^--(.*?)--$!,
                },
                blockorder    =>
                        [qw( header line ordered unordered code paragraph invisible )],
        });

Finding blocks

Text::WikiFormat uses regular expressions to find blocks. These are in the %tags hash under the "blocks" key. To change the regular expression to find code block items, use:

        my $html     =  format($wikitext, {
                blocks   => { 
                        code => qr/^:\s+/,
                },
                indented => {
                        code => 1,
                },
        );

This will require indentation and a colon to mark code lines. A potential shortcut is to use the "indent" tag to match or to change the indentation marker.

Note: if you want to mark a block type as non-indented, you cannot use an empty regex such as "qr//". Use a mostly-empty, always-true regex such as "qr/^/" instead.

Finding Blocks in the Correct Order

As intrepid bug reporter Tom Hukins pointed out in CPAN RT bug #671, the order in which Text::WikiFormat searches for blocks varies by platform and version of Perl. Because some block-finding regular expressions are more specific than others, what you intend to be one type of block may turn into a different list type.

If you're adding new block types, be aware of this. The "blockorder" entry in %tags exists to force Text::WikiFormat to apply its regexes from most specific to least specific. It contains an array reference. By default, it looks for ordered lists first, unordered lists second, and code references at the end.