Translator options

Processing Wildcards

option any_attribute

By default, the "anyAttribute" specification is ignored. When "TAKE_ALL" is given, all attributes which are fulfilling the name-space requirement added to the returned data-structure. As key, the absolute element name will be used, with as value the related unparsed XML element.

In the current implementation, if an explicit attribute is also covered by the name-spaces permitted by the anyAttribute definition, then it will also appear in that list (and hence the handler will be called as well).

Use XML::Compile::Schema::compile(any_attribute) to write your own handler, to influence the behavior. The handler will be called for each attribute, and you must return list of pairs of derived information. When the returned is empty, the attribute data is lost. The value may be a complex structure.

option any_element

By default, the "any" definition in a schema will ignore all elements from the container which are not used. Also in this case "TAKE_ALL" is required to produce "any" results. "SKIP_ALL" will ignore all results, although this are being processed for validation needs.

option any_type CODE

By default, the elements which have type "xsd:anyType" will return an XML::LibXML::Element when there are sub-elements. Otherwise, it will return the textual content.

If you pass your own CODE reference, you can change this behavior. It will get called with the path, the node, and the default handler. Be awayre the $node may actually be a string already.

   $schema->compile(READER => ..., any_type => \&handle_any_type);
   sub handle_any_type($$$)
   { my ($path, $node, $handler) = @_;
     ref $node or return $node;
     $node;
   }

Mixed elements

In this example, the "a" container is marked to be mixed: <a id="5"> before <b>2</b> after </a>

Often the "mixed" option is bending one of both ways: either the element is needed as text, or the element should be parsed and the text ignored. The reader has various options to avoid the need of processing raw XML::LibXML nodes.

[1.00] When the return is a HASH, that HASH will also contain the "_MIXED_ELEMENT_MODE" key, to help people understand what happens. This is not possible for all modes, only for some.

With XML::Compile::Schema::compile(mixed_elements) set to

ATTRIBUTES (the default)

a HASH is returned, the attributes are processed. The node is found as XML::LibXML::Element with the key '_'. Above example will produce $r = { id => 5, _ => $xmlnode };

TEXTUAL

Like the previous, but now the textual representation of the content is returned with key '_'. Above example will produce $r = { id => 5, _ => ' before 2 after '};

STRUCTURAL

will remove all mixed-in text, and treat the element as normal element. The example will be transformed into $r = { id => 5, b => 2 };

XML_NODE

return the XML::LibXML::Node itself. The example: $r = $xmlnode;

XML_STRING

return the mixed node as XML string, just as in the source. Be warned that it is rather expensive: the string was parsed and then stringified again, which is costly for large nodes. Result: $r = '<a id="5"> before <b>2</b> after </a>';

CODE reference

the reference is called with the XML::LibXML::Node as first argument. When a value is returned (even undef), then the right tag with the value will be included in the translators result. When an empty list is returned by the code reference, then nothing is returned (which may result in an error if the element is required according to the schema)

When some of your mixed elements need different behavior from other elements, then you have to go play with the normal hooks in specific cases.

Schema hooks

The "before" hooks receives an XML::LibXML::Node object and the path string. It must return a new (or same) XML node which will be used from then on. You probably can best modify a node clone, not the original as provided by the user. When "undef" is returned, the whole node will disappear.

This hook offers a predefined "PRINT_PATH".

hooks executed as replacement

Your "replace" hook should return a list of key-value pairs. To produce it, it will get the XML::LibXML::Element, the translator settings as HASH, the path, and the localname.

This hook has a predefined "SKIP", which will not process the found element, but simply return the string "SKIPPED" as value. This way, a whole tree of unneeded translations can be avoided.

[1.51] The predefined hook "XML_NODE" will not attempt to parse the selected element, but returns the XML::LibXML::Element node instead. This may break on some schema-contained validations.

Sometimes, the Schema spec is such a mess, that XML::Compile cannot automatically translate it. I have seen cases where confusion over name-spaces is created: a choice between three elements with the same name but different types. Well, in such case you may use XML::LibXML::Simple to translate a part of your tree. Simply

 use XML::LibXML::Simple  qw/XMLin/;
 $schema->addHook
   ( action  => 'READER'
   , type    => 'tns:xyz'     # or pack_type($tns,'xyz')
  #  path    => qr!/company$! # by element name
   , replace =>
       sub { my ($xml, $args, $path, $type, $r) = @_;
             ($type => XMLin($xml, ...));
           }
   );

hooks for post-processing, after the data is collected

Your code reference gets called with three parameters: the XML node, the data collected and the path. Be careful that the collected data might be a SCALAR (for simpleType). Return a HASH or a SCALAR. "undef" may work, unless it is the value of a required element you throw awy.

This hook also offers a predefined "PRINT_PATH". Besides, it has "INCLUDE_PATH", "XML_NODE", "NODE_TYPE", "ELEMENT_ORDER", and "ATTRIBUTE_ORDER", which will result in additional fields in the HASH, respectively containing the NODE which was processed (an XML::LibXML::Element), the type_of_node, the element names, and the attribute names. The keys start with an underscore "_".

Typemaps

Typemap to Class

Usually, an XML type will be mapped on a Perl class. The Perl class implements the "fromXML" method as constructor.

 $schema->addTypemaps($sometype => 'My::Perl::Class');

 package My::Perl::Class;
 ...
 sub fromXML
 {   my ($class, $data, $xmltype) = @_;
     my $self = $class->new($data);
     ...
     $self;
 }

Your method returns the data which will be included in the result tree of the reader. You may return an object, the unmodified $data, or "undef". When "undef" is returned, this may fail the schema parser when the data element is required.

In the simpelest implementation, the class stores its data exactly as the XML structure:

 package My::Perl::Class;
 sub fromXML
 {   my ($class, $data, $xmltype) = @_;
     bless $data, $class;
 }

 # The same, even shorter:
 sub fromXML { bless $_[1], $_[0] }

Typemap to Object

Another option is to implement an object factory: one object which creates other objects. In this case, the $xmltype parameter can come of use, to have one object spawning many different other objects.

 my $object = My::Perl::Class->new(...);
 $schema->typemap($sometype => $object);

 package My::Perl::Class;
 sub fromXML
 {   my ($object, $xmltype, $data) = @_;
     return Some::Other::Class->new($data);
 }

This object factory may be a very simple solution when you map XML onto objects which are not under your control; where there is not way to add the "fromXML" method.

Typemap to CODE

The light version of an object factory works with CODE references.

 $schema->typemap($t1 => \&myhandler);
 sub myhandler
 {   my ($backend, $data, $type) = @_;
     return My::Perl::Class->new($data)
         if $backend eq 'READER';
     $data;
 }

 # shorter
 $schema->typemap($t1 => sub {My::Perl::Class->new($_[1])} );

Typemap implementation

Internally, the typemap is simply translated into an "after" hook for the specific type. After the data was processed via the usual mechanism, the hook will call method "fromXML" on the class or object you specified with the data which was read. You may still use "before" and "replace" hooks, if you need them.

Syntactic sugar:

  $schema->typemap($t1 => 'My::Package');
  $schema->typemap($t2 => $object);

is comparible to

  $schema->typemap($t1 => sub {My::Package->fromXML(@_)});
  $schema->typemap($t2 => sub {$object->fromXML(@_)} );

with some extra checks.