Decimal Versions

                                   # Prints     Equivalent to
  $v = version->new(      1.2);    # 1.2        v1.200.0
  $v = version->new(     1.02);    # 1.02       v1.20.0
  $v = version->new(    1.002);    # 1.002      v1.2.0
  $v = version->new(   1.0023);    # 1.0023     v1.2.300
  $v = version->new(  1.00203);    # 1.00203    v1.2.30
  $v = version->new( 1.002003);    # 1.002003   v1.2.3

All of the preceding examples are true whether or not the input value is quoted. The important feature is that the input value contains only a single decimal. See also "Alpha Versions".

IMPORTANT NOTE: As shown above, if your Decimal version contains more than 3 significant digits after the decimal place, it will be split on each multiple of 3, so 1.0003 is equivalent to v1.0.300, due to the need to remain compatible with Perl's own 5.005_03 == 5.5.30 interpretation. Any trailing zeros are ignored for mathematical comparison purposes.

Dotted-Decimal Versions

Unlike "Decimal Versions", Dotted-Decimal Versions have more than a single decimal point, e.g.:

                                   # Prints
  $v = version->new( "v1.200");    # v1.200.0
  $v = version->new("v1.20.0");    # v1.20.0
  $v = qv("v1.2.3");               # v1.2.3
  $v = qv("1.2.3");                # v1.2.3
  $v = qv("1.20");                 # v1.20.0

In general, Dotted-Decimal Versions permit the greatest amount of freedom to specify a version, whereas Decimal Versions enforce a certain uniformity.

Just like "Decimal Versions", Dotted-Decimal Versions can be used as "Alpha Versions".

Alpha Versions

  # Declaring
  use version 0.77; our $VERSION = version->declare("v1.2_3");

  # Parsing
  $v1 = version->parse("v1.2_3");
  $v1 = version->parse("1.002_003");

Note that you must quote the version when writing an alpha Decimal version. The stringified form of Decimal versions will always be the same string that was used to initialize the version object.

Regular Expressions for Version Parsing

$version::LAX

This regexp covers all of the legal forms allowed under the current version string parser. This is not to say that all of these forms are recommended, and some of them can only be used when quoted.

For dotted decimals:

    v1.2
    1.2345.6
    v1.23_4
    

The leading 'v' is optional if two or more decimals appear. If only a single decimal is included, then the leading 'v' is required to trigger the dotted-decimal parsing. A leading zero is permitted, though not recommended except when quoted, because of the risk that Perl will treat the number as octal. A trailing underscore plus one or more digits denotes an alpha or development release (and must be quoted to be parsed properly).

For decimal versions:

    1
    1.2345
    1.2345_01
    

an integer portion, an optional decimal point, and optionally one or more digits to the right of the decimal are all required. A trailing underscore is permitted and a leading zero is permitted. Just like the lax dotted-decimal version, quoting the values is required for alpha/development forms to be parsed correctly.

$version::STRICT

This regexp covers a much more limited set of formats and constitutes the best practices for initializing version objects. Whether you choose to employ decimal or dotted-decimal for is a personal preference however.

Both of the provided scalars are already compiled as regular expressions and do not contain either anchors or implicit groupings, so they can be included in your own regular expressions freely. For example, consider the following code:

        ($pkg, $ver) =~ /
                ^[ \t]*
                use [ \t]+($PKGNAME)
                (?:[ \t]+($version::STRICT))?
                [ \t]*;
        /x;

This would match a line of the form:

        use Foo::Bar::Baz v1.2.3;       # legal only in Perl 5.8.1+

where $PKGNAME is another regular expression that defines the legal forms for package names.

Equivalence between Decimal and Dotted-Decimal Versions

  5.6.0    == 5.006000
  5.005_04 == 5.5.40

The floating point number is taken and split first on the single decimal place, then each group of three digits to the right of the decimal makes up the next digit, and so on until the number of significant digits is exhausted, plus enough trailing zeros to reach the next multiple of three.

This was the method that version.pm adopted as well. Some examples may be helpful:

                            equivalent
  decimal    zero-padded    dotted-decimal
  -------    -----------    --------------
  1.2        1.200          v1.200.0
  1.02       1.020          v1.20.0
  1.002      1.002          v1.2.0
  1.0023     1.002300       v1.2.300
  1.00203    1.002030       v1.2.30
  1.002003   1.002003       v1.2.3

Quoting Rules

Additionally, if you quote your initializer, then the quoted value that goes in will be exactly what comes out when your $VERSION is printed (stringified). If you do not quote your value, Perl's normal numeric handling comes into play and you may not get back what you were expecting.

If you use a mathematic formula that resolves to a floating point number, you are dependent on Perl's conversion routines to yield the version you expect. You are pretty safe by dividing by a power of 10, for example, but other operations are not likely to be what you intend. For example:

  $VERSION = version->new((qw$Revision: 1.4)[1]/10);
  print $VERSION;          # yields 0.14
  $V2 = version->new(100/9); # Integer overflow in decimal number
  print $V2;               # yields something like 11.111.111.100

Perl 5.8.1 and beyond are able to automatically quote v-strings but that is not possible in earlier versions of Perl. In other words:

  $version = version->new("v2.5.4");  # legal in all versions of Perl
  $newvers = version->new(v2.5.4);    # legal only in Perl >= 5.8.1

What about v-strings?

  $vs1 = 1.2.3; # encoded as \1\2\3
  $vs2 = v1.2;  # encoded as \1\2

However, the use of bare v-strings to initialize version objects is strongly discouraged in all circumstances. Also, bare v-strings are not completely supported in any version of Perl prior to 5.8.1.

If you insist on using bare v-strings with Perl > 5.6.0, be aware of the following limitations:

1) For Perl releases 5.6.0 through 5.8.0, the v-string code merely guesses, based on some characteristics of v-strings. You must use a three part version, e.g. 1.2.3 or v1.2.3 in order for this heuristic to be successful.

2) For Perl releases 5.8.1 and later, v-strings have changed in the Perl core to be magical, which means that the version.pm code can automatically determine whether the v-string encoding was used.

3) In all cases, a version created using v-strings will have a stringified form that has a leading 'v' character, for the simple reason that sometimes it is impossible to tell whether one was present initially.

Version Object Internals

The internal structure of version objects is a blessed hash with several components:

    bless( {
      'original' => 'v1.2.3_4',
      'alpha' => 1,
      'qv' => 1,
      'version' => [
        1,
        2,
        3,
        4
      ]
    }, 'version' );

original

A faithful representation of the value used to initialize this version object. The only time this will not be precisely the same characters that exist in the source file is if a short dotted-decimal version like v1.2 was used (in which case it will contain 'v1.2'). This form is STRONGLY discouraged, in that it will confuse you and your users.

qv

A boolean that denotes whether this is a decimal or dotted-decimal version. See "is_qv()" in version.

alpha

A boolean that denotes whether this is an alpha version. NOTE: that the underscore can only appear in the last position. See "is_alpha()" in version.

version

An array of non-negative integers that is used for comparison purposes with other version objects.

Replacement UNIVERSAL::VERSION

For example:

  package Foo;
  $VERSION = 1.2;

  package Bar;
  $VERSION = "v1.3.5"; # works with all Perl's (since it is quoted)

  package main;
  use version;

  print $Foo::VERSION; # prints 1.2

  print $Bar::VERSION; # prints 1.003005

  eval "use foo 10";
  print $@; # prints "foo version 10 required..."
  eval "use foo 1.3.5; # work in Perl 5.6.1 or better
  print $@; # prints "foo version 1.3.5 required..."

  eval "use bar 1.3.6";
  print $@; # prints "bar version 1.3.6 required..."
  eval "use bar 1.004"; # note Decimal version
  print $@; # prints "bar version 1.004 required..."

IMPORTANT NOTE: This may mean that code which searches for a specific string (to determine whether a given module is available) may need to be changed. It is always better to use the built-in comparison implicit in "use" or "require", rather than manually poking at "class->VERSION" and then doing a comparison yourself.

The replacement UNIVERSAL::VERSION, when used as a function, like this:

  print $module->VERSION;

will also exclusively return the stringified form. See "Stringification" for more details.

Using modules that use version.pm

  package Example;
  use version;  $VERSION = qv('1.2.2');
  ...module code here...
  1;

Decimal versions always work

Code of the form:

  use Example 1.002003;
    

will always work correctly. The "use" will perform an automatic $VERSION comparison using the floating point number given as the first term after the module name (e.g. above 1.002.003). In this case, the installed module is too old for the requested line, so you would see an error like:

  Example version 1.002003 (v1.2.3) required--this is only version 1.002002 (v1.2.2)...
    

Dotted-Decimal version work sometimes

With Perl >= 5.6.2, you can also use a line like this:

  use Example 1.2.3;
    

and it will again work (i.e. give the error message as above), even with releases of Perl which do not normally support v-strings (see "What about v-strings?" above). This has to do with that fact that "use" only checks to see if the second term looks like a number and passes that to the replacement UNIVERSAL::VERSION. This is not true in Perl 5.005_04, however, so you are strongly encouraged to always use a Decimal version in your code, even for those versions of Perl which support the Dotted-Decimal version.

Object Methods

new()

Like many OO interfaces, the new() method is used to initialize version objects. If two arguments are passed to "new()", the second one will be used as if it were prefixed with "v". This is to support historical use of the "qw" operator with the CVS variable $Revision, which is automatically incremented by CVS every time the file is committed to the repository.

In order to facilitate this feature, the following code can be employed:

  $VERSION = version->new(qw$Revision: 2.7 $);
    

and the version object will be created as if the following code were used:

  $VERSION = version->new("v2.7");
    

In other words, the version will be automatically parsed out of the string, and it will be quoted to preserve the meaning CVS normally carries for versions. The CVS $Revision$ increments differently from Decimal versions (i.e. 1.10 follows 1.9), so it must be handled as if it were a Dotted-Decimal Version.

A new version object can be created as a copy of an existing version object, either as a class method:

  $v1 = version->new(12.3);
  $v2 = version->new($v1);
    

or as an object method:

  $v1 = version->new(12.3);
  $v2 = $v1->new(12.3);
    

and in each case, $v1 and $v2 will be identical. NOTE: if you create a new object using an existing object like this:

  $v2 = $v1->new();
    

the new object will not be a clone of the existing object. In the example case, $v2 will be an empty object of the same type as $v1.

qv()

An alternate way to create a new version object is through the exported qv() sub. This is not strictly like other q? operators (like qq, qw), in that the only delimiters supported are parentheses (or spaces). It is the best way to initialize a short version without triggering the floating point interpretation. For example:

  $v1 = qv(1.2);         # v1.2.0
  $v2 = qv("1.2");       # also v1.2.0
    

As you can see, either a bare number or a quoted string can usually be used interchangeably, except in the case of a trailing zero, which must be quoted to be converted properly. For this reason, it is strongly recommended that all initializers to qv() be quoted strings instead of bare numbers.

To prevent the "qv()" function from being exported to the caller's namespace, either use version with a null parameter:

  use version ();
    

or just require version, like this:

  require version;
    

Both methods will prevent the import() method from firing and exporting the "qv()" sub.

For the subsequent examples, the following three objects will be used:

  $ver   = version->new("1.2.3.4"); # see "Quoting Rules"
  $alpha = version->new("1.2.3_4"); # see "Alpha Versions"
  $nver  = version->new(1.002);     # see "Decimal Versions"

Normal Form

For any version object which is initialized with multiple decimal places (either quoted or if possible v-string), or initialized using the qv() operator, the stringified representation is returned in a normalized or reduced form (no extraneous zeros), and with a leading 'v':

  print $ver->normal;         # prints as v1.2.3.4
  print $ver->stringify;      # ditto
  print $ver;                 # ditto
  print $nver->normal;        # prints as v1.2.0
  print $nver->stringify;     # prints as 1.002,
                              # see "Stringification"
    

In order to preserve the meaning of the processed version, the normalized representation will always contain at least three sub terms. In other words, the following is guaranteed to always be true:

  my $newver = version->new($ver->stringify);
  if ($newver eq $ver ) # always true
    {...}
    

Numification

Although all mathematical operations on version objects are forbidden by default, it is possible to retrieve a number which corresponds to the version object through the use of the $obj->numify method. For formatting purposes, when displaying a number which corresponds a version object, all sub versions are assumed to have three decimal places. So for example:

  print $ver->numify;         # prints 1.002003004
  print $nver->numify;        # prints 1.002
    

Unlike the stringification operator, there is never any need to append trailing zeros to preserve the correct version value.

Stringification

The default stringification for version objects returns exactly the same string as was used to create it, whether you used "new()" or "qv()", with one exception. The sole exception is if the object was created using "qv()" and the initializer did not have two decimal places or a leading 'v' (both optional), then the stringified form will have a leading 'v' prepended, in order to support round-trip processing.

For example:

  Initialized as          Stringifies to
  ==============          ==============
  version->new("1.2")       1.2
  version->new("v1.2")     v1.2
  qv("1.2.3")               1.2.3
  qv("v1.3.5")             v1.3.5
  qv("1.2")                v1.2   ### exceptional case
    

See also UNIVERSAL::VERSION, as this also returns the stringified form when used as a class method.

IMPORTANT NOTE: There is one exceptional cases shown in the above table where the "initializer" is not stringwise equivalent to the stringified representation. If you use the "qv"() operator on a version without a leading 'v' and with only a single decimal place, the stringified output will have a leading 'v', to preserve the sense. See the "qv()" operator for more details.

IMPORTANT NOTE 2: Attempting to bypass the normal stringification rules by manually applying numify() and normal() will sometimes yield surprising results:

  print version->new(version->new("v1.0")->numify)->normal; # v1.0.0
    

The reason for this is that the numify() operator will turn "v1.0" into the equivalent string "1.000000". Forcing the outer version object to normal() form will display the mathematically equivalent "v1.0.0".

As the example in "new()" shows, you can always create a copy of an existing version object with the same value by the very compact:

  $v2 = $v1->new($v1);
    

and be assured that both $v1 and $v2 will be completely equivalent, down to the same internal representation as well as stringification.

Comparison operators

Both "cmp" and "<=>" operators perform the same comparison between terms (upgrading to a version object automatically). Perl automatically generates all of the other comparison operators based on those two. In addition to the obvious equalities listed below, appending a single trailing 0 term does not change the value of a version for comparison purposes. In other words "v1.2" and "1.2.0" will compare as identical.

For example, the following relations hold:

  As Number        As String           Truth Value
  -------------    ----------------    -----------
  $ver >  1.0      $ver gt "1.0"       true
  $ver <  2.5      $ver lt             true
  $ver != 1.3      $ver ne "1.3"       true
  $ver == 1.2      $ver eq "1.2"       false
  $ver == 1.2.3.4  $ver eq "1.2.3.4"   see discussion below
    

It is probably best to chose either the Decimal notation or the string notation and stick with it, to reduce confusion. Perl6 version objects may only support Decimal comparisons. See also "Quoting Rules".

WARNING: Comparing version with unequal numbers of decimal points (whether explicitly or implicitly initialized), may yield unexpected results at first glance. For example, the following inequalities hold:

  version->new(0.96)     > version->new(0.95); # 0.960.0 > 0.950.0
  version->new("0.96.1") < version->new(0.95); # 0.096.1 < 0.950.0
    

For this reason, it is best to use either exclusively "Decimal Versions" or "Dotted-Decimal Versions" with multiple decimal points.

Logical Operators

If you need to test whether a version object has been initialized, you can simply test it directly:

  $vobj = version->new($something);
  if ( $vobj )   # true only if $something was non-blank
    

You can also test whether a version object is an alpha version, for example to prevent the use of some feature not present in the main release:

  $vobj = version->new("1.2_3"); # MUST QUOTE
  ...later...
  if ( $vobj->is_alpha )       # True