|
|
| |
HDPVR(4) |
FreeBSD Kernel Interfaces Manual |
HDPVR(4) |
hdpvr —
webcamd driver for Hauppauge USB HD-PVR
The hdpvr driver supports the Hauppauge HD-PVR, a USB
device that captures the component video outputs and analog/optical audio
outputs of consumer devices such as cable/satellite set-top-boxes, HD disk
players, and video game consoles. The HD-PVR captures video via component
output, permitting the capture of HD video from most sources. Since component
video cannot be encrypted, satellite and premium television can be fully
accessible to applications such as MythTV.
Devices using the hdpvr driver become
available to other applications once
webcamd(8)
is loaded.
The hdpvr driver should work with the following USB
devices. The
usbconfig(8)
command can be used to determine the VendorID:ProductID of a plugged in USB
device.
VendorID:ProductID |
Device |
2040:4900 |
|
Hauppauge HD-PVR |
2040:4901 |
|
Hauppauge HD-PVR |
2040:4902 |
|
Hauppauge HD-PVR |
2040:4903 |
|
Hauppauge HD-PVR |
2040:4982 |
|
Hauppauge HD-PVR |
Newer ProductIDs may also be supported by adding them to the
hdpvr.h and hdpvr-core.c files found within the work/ subdirectory of the
webcamd ports directory. If this directory does not exist, run "make
extract" in /usr/ports/multimedia/webcamd, edit the files, then compile
the port.
Firmware upgrades must be run from a Windows system. If you have a "rev
c1" unit you must install the HD-PVR at least once on a Windows machine
to load the firmware into it. If you have a Revision 2 unit (including a
sticker marked "rev c2" on the bottom of the unit) then it will come
loaded with a firmware.
a800(4),
af9005(4),
af9015(4),
anysee(4),
au0828(4),
au6610(4),
b2c2(4),
benq(4),
ce6230(4),
cinergy(4),
conex(4),
cpiax(4),
cxusb(4),
dib0700(4),
digitv(4),
dtt200u(4),
dtv5100(4),
dw2102(4),
ec168(4),
em28xx(4),
et61x251(4),
finepix(4),
friio(4),
gl860(4),
gl861(4),
gp8psk(4),
ibmcam(4),
jeilinj(4),
m5602(4),
m920x(4),
mars(4),
mr800(4),
mr97310a(4),
nova-t(4),
opera1(4),
ov519(4),
ov534(4),
pacxxx(4),
pvrusb2(4),
pwcusb(4),
s2255(4),
se401(4),
siano(4),
sn9c102(4),
sn9c20x(4),
sonixj(4),
spca5xx(4),
sq905c(4),
stk014(4),
stv06xx(4),
sunplus(4),
t613(4),
ttusb2(4),
tv8532(4),
umt(4),
usbvision(4),
uvc(4),
vc032x(4),
vp702x(4),
vp7045(4),
zc3xx(4),
zr364xx(4),
webcamd(8)
The original hdpvr driver was written by Janne Grunau
j@jannau.net for the Video4Linux project. It was ported to the FreeBSD webcamd
port by Hans Petter Selasky hselasky@freebsd.org. This
man page was written by Dru Lavigne dru@freebsd.org.
Visit the GSP FreeBSD Man Page Interface. Output converted with ManDoc. |