NAME

uvscom —

USB support for SUNTAC Slipper U VS-10U serial adapters driver

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file:

device usb
device ucom
device uvscom

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

uvscom_load="YES"

HARDWARE

The uvscom driver supports the following adapters:

DDI Pocket Air H" C@rd
DDI Pocket Air H" C@rd 64
NTT P-in
NTT P-in m@ster

DESCRIPTION

The uvscom driver provides support for the SUNTAC Slipper U VS-10U chip. Slipper U is a PC Card to USB converter for data communication card adapters.

The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

FILES

/dev/ttyU*: for callin ports
/dev/ttyU*.init
/dev/ttyU*.lock: corresponding callin initial-state and lock-state devices
/dev/cuaU*: for callout ports
/dev/cuaU*.init
/dev/cuaU*.lock: corresponding callout initial-state and lock-state devices

HISTORY

The uvscom driver first appeared in FreeBSD and later in NetBSD 1.6. This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.