NAME

SYNOPSIS

Section "InputDevice"
  Identifier "devname"
  Driver "synaptics"
  Option "Device"   "devpath"
  Option "Path"     "path"
  ...
EndSection

DESCRIPTION

• Movement with adjustable, non-linear acceleration and speed.
• Button events through short touching of the touchpad.
• Double-Button events through double short touching of the touchpad.
• Dragging through short touching and holding down the finger on the touchpad (tap-and-drag gesture).
• Middle and right button events on the upper and lower corner of the touchpad.
• Vertical scrolling (button four and five events) through moving the finger on the right side of the touchpad.
• The up/down button sends button four/five events.
• Horizontal scrolling (button six and seven events) through moving the finger on the lower side of the touchpad.
• The multi-buttons send button four/five events for vertical scrolling and button six/seven events for horizontal scrolling.
• Adjustable finger detection.
• Multifinger taps: two finger for right button and three finger for middle button events. (Needs hardware support. Not all models implement this feature.)
• Pressure-dependent motion speed.

Note that depending on the touchpad firmware, some of these features might be available even without using the synaptics driver. Note also that some functions are not available on all touchpad models, because they need support from the touchpad hardware/firmware. (Multifinger taps for example.)

The name "synaptics" is historical and the driver still provides the synaptics protocol parsing code. Under Linux however, the hardware-specifics are handled by the kernel and this driver will work for any touchpad that has a working kernel driver. If your device is recognized as "PS/2 Mouse" or similar, the kernel driver does not support your device and this driver will only provide limited functionality.

CONFIGURATION OPTIONS

The following driver Options are supported:

Option "Device" "string"

This option specifies the device file in your "/dev" directory which will be used to access the physical device. Normally you should use something like "/dev/input/eventX", where X is some integer.

Option "Protocol" "string"

Specifies which kernel driver will be used by this driver. This is the list of supported drivers and their default use scenarios.

auto-dev	automatic, default (recommend)
event	Linux 2.6 kernel events
psaux	raw device access (Linux 2.4)
psm	FreeBSD psm driver

Option "LeftEdge" "integer"

X coordinate for left edge. Property: "Synaptics Edges"

Option "RightEdge" "integer"

X coordinate for right edge. Property: "Synaptics Edges"

Option "TopEdge" "integer"

Y coordinate for top edge. Property: "Synaptics Edges"

Option "BottomEdge" "integer"

Y coordinate for bottom edge. Property: "Synaptics Edges"

Option "FingerLow" "integer"

When finger pressure drops below this value, the driver counts it as a release. Property: "Synaptics Finger"

Option "FingerHigh" "integer"

When finger pressure goes above this value, the driver counts it as a touch. Property: "Synaptics Finger"

Option "MaxTapTime" "integer"

Maximum time (in milliseconds) for detecting a tap. Property: "Synaptics Tap Durations"

Option "MaxTapMove" "integer"

Maximum movement of the finger for detecting a tap. Property: "Synaptics Tap Move"

Option "MaxDoubleTapTime" "integer"

Maximum time (in milliseconds) for detecting a double tap. Property: "Synaptics Tap Durations"

Option "ClickTime" "integer"

The duration of the mouse click generated by tapping. Property: "Synaptics Tap Durations"

Option "ClickPad" "boolean"

Whether the device is a click pad. See ClickPad support for more details. Property: "Synaptics ClickPad"

Option "VertEdgeScroll" "boolean"

Enable vertical scrolling when dragging along the right edge. Property: "Synaptics Edge Scrolling"

Option "HorizEdgeScroll" "boolean"

Enable horizontal scrolling when dragging along the bottom edge. Property: "Synaptics Edge Scrolling"

Option "CornerCoasting" "boolean"

Enable edge scrolling to continue while the finger stays in an edge corner. Property: "Synaptics Edge Scrolling"

Option "VertTwoFingerScroll" "boolean"

Enable vertical scrolling when dragging with two fingers anywhere on the touchpad. Property: "Synaptics Two-Finger Scrolling"

Option "HorizTwoFingerScroll" "boolean"

Enable horizontal scrolling when dragging with two fingers anywhere on the touchpad. Property: "Synaptics Two-Finger Scrolling"

Option "VertScrollDelta" "integer"

Move distance of the finger for a scroll event. Property: "Synaptics Scrolling Distance"

Option "HorizScrollDelta" "integer"

Move distance of the finger for a scroll event. Property: "Synaptics Scrolling Distance"

Option "MinSpeed" "float"

Minimum speed factor. Property: "Synaptics Move Speed"

Option "MaxSpeed" "float"

Maximum speed factor. Property: "Synaptics Move Speed"

Option "AccelFactor" "float"

Acceleration factor for normal pointer movements. Property: "Synaptics Move Speed"

Option "PressureMotionMinZ" "integer"

Finger pressure at which minimum pressure motion factor is applied. Property: "Synaptics Pressure Motion"

Option "PressureMotionMaxZ" "integer"

Finger pressure at which maximum pressure motion factor is applied. Property: "Synaptics Pressure Motion"

Option "PressureMotionMinFactor" "integer"

Lowest setting for pressure motion factor. Property: "Synaptics Pressure Motion Factor"

Option "PressureMotionMaxFactor" "integer"

Greatest setting for pressure motion factor. Property: "Synaptics Pressure Motion Factor"

Option "HorizHysteresis" "integer"

The minimum horizontal HW distance required to generate motion events. Can be specified as a percentage. Increase if noise motion is a problem for you. Zero is disabled. Default: 0.5 percent of the diagonal or (in case of evdev) the appropriate "fuzz" as advertised by the device.

Option "VertHysteresis" "integer"

The minimum vertical HW distance required to generate motion events. See HorizHysteresis.

Option "UpDownScrolling" "boolean"

If on, the up/down buttons generate button 4/5 events. If off, the up button generates a double click and the down button generates a button 2 event. This option is only available for touchpads with physical scroll buttons. Property: "Synaptics Button Scrolling"

Option "LeftRightScrolling" "boolean"

If on, the left/right buttons generate button 6/7 events. If off, the left/right buttons both generate button 2 events. This option is only available for touchpads with physical scroll buttons. Property: "Synaptics Button Scrolling"

Option "UpDownScrollRepeat" "boolean"

If on, and the up/down buttons are used for scrolling (UpDownScrolling), these buttons will send auto-repeating 4/5 events, with the delay between repeats determined by ScrollButtonRepeat. This option is only available for touchpads with physical scroll buttons. Property: "Synaptics Button Scrolling Repeat"

Option "LeftRightScrollRepeat" "boolean"

If on, and the left/right buttons are used for scrolling (LeftRightScrolling), these buttons will send auto-repeating 6/7 events, with the delay between repeats determined by ScrollButtonRepeat. This option is only available for touchpads with physical scroll buttons. Property: "Synaptics Button Scrolling Repeat"

Option "ScrollButtonRepeat" "integer"

The number of milliseconds between repeats of button events 4-7 from the up/down/left/right scroll buttons. This option is only available for touchpads with physical scroll buttons. Property: "Synaptics Button Scrolling Time"

Option "EmulateMidButtonTime" "integer"

Maximum time (in milliseconds) for middle button emulation. Property: "Synaptics Middle Button Timeout"

Option "EmulateTwoFingerMinZ" "integer"

For touchpads not capable of detecting multiple fingers but are capable of detecting finger pressure and width, this sets the Z pressure threshold. When both Z pressure and W width thresholds are crossed, a two finger press will be emulated. This defaults to a value that disables emulation on touchpads with real two-finger detection and defaults to a value that enables emulation on remaining touchpads that support pressure and width support. Property: "Synaptics Two-Finger Pressure"

Option "EmulateTwoFingerMinW" "integer"

For touchpads not capable of detecting multiple fingers but are capable of detecting finger width and pressure, this sets the W width threshold. When both W width and Z pressure thresholds are crossed, a two finger press will be emulated. This feature works best with (PalmDetect) off. Property: "Synaptics Two-Finger Width"

Option "TouchpadOff" "integer"

Switch off the touchpad. Valid values are:

0	Touchpad is enabled
1	Touchpad is switched off (physical clicks still work)
2	Only tapping and scrolling is switched off

When the touchpad is switched off, button events caused by a physical button press are still interpreted. On a ClickPad, this includes software-emulated middle and right buttons as defined by the SoftButtonAreas setting.

Property: "Synaptics Off"

Option "LockedDrags" "boolean"

If off, a tap-and-drag gesture ends when you release the finger. If on, the gesture is active until you tap a second time, or until LockedDragTimeout expires. Property: "Synaptics Locked Drags"

Option "LockedDragTimeout" "integer"

This parameter specifies how long it takes (in milliseconds) for the LockedDrags mode to be automatically turned off after the finger is released from the touchpad. Property: "Synaptics Locked Drags Timeout"

Option "RTCornerButton" "integer"

Which mouse button is reported on a right top corner tap. Set to 0 to disable. Property: "Synaptics Tap Action"

Option "RBCornerButton" "integer"

Which mouse button is reported on a right bottom corner tap. Set to 0 to disable. Property: "Synaptics Tap Action"

Option "LTCornerButton" "integer"

Which mouse button is reported on a left top corner tap. Set to 0 to disable. Property: "Synaptics Tap Action"

Option "LBCornerButton" "integer"

Which mouse button is reported on a left bottom corner tap. Set to 0 to disable. Property: "Synaptics Tap Action"

Option "TapButton1" "integer"

Which mouse button is reported on a non-corner one-finger tap. Set to 0 to disable. Property: "Synaptics Tap Action"

Option "TapButton2" "integer"

Which mouse button is reported on a non-corner two-finger tap. Set to 0 to disable. Property: "Synaptics Tap Action"

Option "TapButton3" "integer"

Which mouse button is reported on a non-corner three-finger tap. Set to 0 to disable. Property: "Synaptics Tap Action"

Option "ClickFinger1" "integer"

Which mouse button is reported when left-clicking with one finger. Set to 0 to disable. Property: "Synaptics Click Action"

Option "ClickFinger2" "integer"

Which mouse button is reported when left-clicking with two fingers. Set to 0 to disable. Property: "Synaptics Click Action"

Option "ClickFinger3" "integer"

Which mouse button is reported when left-clicking with three fingers. Set to 0 to disable. Property: "Synaptics Click Action"

Option "CircularScrolling" "boolean"

If on, circular scrolling is used. Property: "Synaptics Circular Scrolling"

Option "CircScrollDelta" "float"

Move angle (radians) of finger to generate a scroll event. Property: "Synaptics Circular Scrolling Distance"

Option "CircScrollTrigger" "integer"

Trigger region on the touchpad to start circular scrolling

0	All Edges
1	Top Edge
2	Top Right Corner
3	Right Edge
4	Bottom Right Corner
5	Bottom Edge
6	Bottom Left Corner
7	Left Edge
8	Top Left Corner

Property: "Synaptics Circular Scrolling Trigger"

Option "CircularPad" "boolean"

Instead of being a rectangle, the edge is the ellipse enclosed by the Left/Right/Top/BottomEdge parameters. For circular touchpads. Property: "Synaptics Circular Pad"

Option "PalmDetect" "boolean"

If palm detection should be enabled. Note that this also requires hardware/firmware support from the touchpad. Property: "Synaptics Palm Detection"

Option "PalmMinWidth" "integer"

Minimum finger width at which touch is considered a palm. Property: "Synaptics Palm Dimensions"

Option "PalmMinZ" "integer"

Minimum finger pressure at which touch is considered a palm. Property: "Synaptics Palm Dimensions"

Option "CoastingSpeed" "float"

Your finger needs to produce this many scrolls per second in order to start coasting. The default is 20 which should prevent you from starting coasting unintentionally. 0 disables coasting. Property: "Synaptics Coasting Speed"

Option "CoastingFriction" "float"

Number of scrolls/second² to decrease the coasting speed. Default is 50. Property: "Synaptics Coasting Speed"

Option "SingleTapTimeout" "integer"

Timeout after a tap to recognize it as a single tap. Property: "Synaptics Tap Durations"

Option "GrabEventDevice" "boolean"

If GrabEventDevice is true, the driver will grab the event device for exclusive use when using the linux 2.6 event protocol. When using other protocols, this option has no effect. Grabbing the event device means that no other user space or kernel space program sees the touchpad events. This is desirable if the X config file includes /dev/input/mice as an input device, but is undesirable if you want to monitor the device from user space. When changing this parameter with the synclient program, the change will not take effect until the synaptics driver is disabled and reenabled. This can be achieved by switching to a text console and then switching back to X.

Option "TapAndDragGesture" "boolean"

Switch on/off the tap-and-drag gesture. This gesture is an alternative way of dragging. It is performed by tapping (touching and releasing the finger), then touching again and moving the finger on the touchpad. The gesture is enabled by default and can be disabled by setting the TapAndDragGesture option to false. Property: "Synaptics Gestures"

Option "VertResolution" "integer"

Resolution of X coordinates in units/millimeter. The value is used together with HorizResolution to compensate unequal vertical and horizontal sensitivity. Setting VertResolution and HorizResolution equal values means no compensation. Default value is read from the touchpad or set to 1 if value could not be read. Property: "Synaptics Pad Resolution"

Option "HorizResolution" "integer"

Resolution of Y coordinates in units/millimeter. The value is used together with VertResolution to compensate unequal vertical and horizontal sensitivity. Setting VertResolution and HorizResolution equal values means no compensation. Default value is read from the touchpad or set to 1 if value could not be read. Property: "Synaptics Pad Resolution"

Option "AreaLeftEdge" "integer"

Ignore movements, scrolling and tapping which start left of this edge. The option is disabled by default and can be enabled by setting the AreaLeftEdge option to any integer value other than zero. If supported by the server (version 1.9 and later), the edge may be specified in percent of the total width of the touchpad. Property: "Synaptics Area"

Option "AreaRightEdge" "integer"

Ignore movements, scrolling and tapping which start right of this edge. The option is disabled by default and can be enabled by setting the AreaRightEdge option to any integer value other than zero. If supported by the server (version 1.9 and later), the edge may be specified in percent of the total width of the touchpad. Property: "Synaptics Area"

Option "AreaTopEdge" "integer"

Ignore movements, scrolling and tapping which start above this edge. The option is disabled by default and can be enabled by setting the AreaTopEdge option to any integer value other than zero. If supported by the server (version 1.9 and later), the edge may be specified in percent of the total height of the touchpad. Property: "Synaptics Area"

Option "AreaBottomEdge" "integer"

Ignore movements, scrolling and tapping which start below this edge. The option is disabled by default and can be enabled by setting the AreaBottomEdge option to any integer value other than zero. If supported by the server (version 1.9 and later), the edge may be specified in percent of the total height of the touchpad. Property: "Synaptics Area"

Option "SoftButtonAreas" "RBL RBR RBT RBB MBL MBR MBT MBB"

This option is only available on ClickPad devices. Enable soft button click area support on ClickPad devices. The first four parameters are the left, right, top, bottom edge of the right button, respectively, the second four parameters are the left, right, top, bottom edge of the middle button, respectively. Any of the values may be given as percentage of the touchpad width or height, whichever applies. If any edge is set to 0 (not 0%), the button is assumed to extend to infinity in the given direction. Setting all values to 0 (not 0%) disables soft button areas. Button areas may not overlap, however it is permitted for two buttons to share an edge value. Property: "Synaptics Soft Button Areas"

Option "HasSecondarySoftButtons" "boolean"

This option is only available on ClickPad devices. Enable the secondary software button area support. The exact area must be set in option "SecondarySoftButtonAreas". See ClickPad support for more details.

Option "SecondarySoftButtonAreas" "RBL RBR RBT RBB MBL MBR MBT MBB"

This option is only available on ClickPad devices and only if Option "HasSecondarySoftButtons" is enabled. Define the secondary soft button click areas on ClickPad devices (usually on top of the device). For the allowed values for this option, see Option "SoftButtonAreas". Primary and secondary soft button areas must not overlap each other. If they do, the behavior of the driver is undefined. Property: "Synaptics Secondary Soft Button Areas". This property is only initialized if Option "HasSecondarySoftButtons" is enabled and this option is set in the xorg.conf(5).

CONFIGURATION DETAILS

DEVICE PROPERTIES

Synaptics Edges

32 bit, 4 values, left, right, top, bottom.

Synaptics Finger

32 bit, 3 values, low, high, press.

Synaptics Tap Time

32 bit.

Synaptics Tap Move

32 bit.

Synaptics Tap Durations

32 bit, 3 values, single touch timeout, max tapping time for double taps, duration of a single click.

Synaptics ClickPad

8 bit (Bool).

Synaptics Middle Button Timeout

32 bit.

Synaptics Two-Finger Pressure

32 bit.

Synaptics Two-Finger Width

32 bit.

Synaptics Scrolling Distance

32 bit, 2 values, vert, horiz.

Synaptics Edge Scrolling

8 bit (BOOL), 3 values, vertical, horizontal, corner.

Synaptics Two-Finger Scrolling

8 bit (BOOL), 2 values, vertical, horizontal.

Synaptics Move Speed

FLOAT, 4 values, min, max, accel, <deprecated>

Synaptics Button Scrolling

8 bit (BOOL), 2 values, updown, leftright.

Synaptics Button Scrolling Repeat

8 bit (BOOL), 2 values, updown, leftright.

Synaptics Button Scrolling Time

32 bit.

Synaptics Off

8 bit, valid values (0, 1, 2).

Synaptics Locked Drags

8 bit (BOOL).

Synaptics Locked Drags Timeout

32 bit.

Synaptics Tap Action

8 bit, up to MAX_TAP values (see synaptics.h), 0 disables an element. order: RT, RB, LT, LB, F1, F2, F3.

Synaptics Click Action

8 bit, up to MAX_CLICK values (see synaptics.h), 0 disables an element. order: Finger 1, 2, 3.

Synaptics Circular Scrolling

8 bit (BOOL).

Synaptics Circular Scrolling Distance

FLOAT.

Synaptics Circular Scrolling Trigger

8 bit, valid values 0..8 (inclusive) order: any edge, top, top + right, right, right + bottom, bottom, bottom + left, left, left + top.

Synaptics Circular Pad

8 bit (BOOL).

Synaptics Palm Detection

8 bit (BOOL).

Synaptics Palm Dimensions

32 bit, 2 values, width, z.

Synaptics Coasting Speed

FLOAT, 2 values, speed, friction.

Synaptics Pressure Motion

32 bit, 2 values, min, max.

Synaptics Pressure Motion Factor

FLOAT, 2 values, min, max.

Synaptics Grab Event Device

8 bit (BOOL).

Synaptics Gestures

8 bit (BOOL), 1 value, tap-and-drag.

Synaptics Area

The AreaLeftEdge, AreaRightEdge, AreaTopEdge and AreaBottomEdge parameters are used to define the edges of the active area of the touchpad. All movements, scrolling and tapping which take place outside of this area will be ignored. This property is disabled by default.

32 bit, 4 values, left, right, top, bottom. 0 disables an element.

Synaptics Soft Button Areas

This property is only available on ClickPad devices. The Right and middle soft button areas are used to support right and middle click actions on a ClickPad device. Providing 0 for all values of a given button disables the button area.

32 bit, 8 values, RBL, RBR, RBT, RBB, MBL, MBR, MBT, MBB.

Synaptics Capabilities

This read-only property expresses the physical capability of the touchpad, most notably whether the touchpad hardware supports multi-finger tapping and scrolling.

8 bit (BOOL), 7 values (read-only), has left button, has middle button, has right button, two-finger detection, three-finger detection, pressure detection, and finger/palm width detection.

Synaptics Pad Resolution

32 bit unsigned, 2 values (read-only), vertical, horizontal in units/millimeter.

NOTES

Configuration through hal fdi files is recommended in X servers 1.5, 1.6 and 1.7. An example hal policy file is provided in ${sourcecode}/conf/11-x11-synaptics.fdi

If either of Protocol "auto-dev" (default) or Protocol "event" is used, the driver initializes defaults based on the capabilities reported by the kernel driver. Acceleration, edges and resolution are based on the dimensions reported by the kernel. If the kernel reports multi-finger detection, two-finger vertical scrolling is enabled, horizontal two-finger scrolling is disabled and edge scrolling is disabled. If no multi-finger capabilities are reported, edge scrolling is enabled for both horizontal and vertical scrolling. Tapping is disabled by default for touchpads with one or more physical buttons. To enable it you need to map tap actions to buttons. See the "TapButton1", "TapButton2" and "TapButton3" options.

Button mapping for physical buttons is handled in the server. If the device is switched to left-handed (an in-server mapping of physical buttons 1, 2, 3 to the logical buttons 3, 2, 1, respectively), both physical and TapButtons are affected. To counteract this, the TapButtons need to be set up in reverse order (TapButton1=3, TapButton2=1).

REMOVED OPTIONS

Option "Repeater" "string"

Option "HistorySize" "integer"

Option "SpecialScrollAreaRight" "boolean"

Option "GuestMouseOff" "boolean"

Option "SHMConfig" "boolean"

Option "FingerPress" "integer"

Option "TrackstickSpeed" "float"

Option "EdgeMotionMinZ" "integer"

Option "EdgeMotionMaxZ" "integer"

Option "EdgeMotionMinSpeed" "integer"

Option "EdgeMotionMaxSpeed" "integer"

Option "EdgeMotionUseAlways" "boolean"

AUTHORS

SEE ALSO