NAME

SYNOPSIS

FILE FORMAT

There are three types of lines in aide.conf. First there are the configuration options which are used to set configuration parameters and define groups. Second, there are (restricted) rules that are used to indicate which files are added to the database. Third, macro lines define or undefine variables within the config file. Lines beginning with # are ignored as comments.

CONFIG OPTIONS

database_in (type: URL, default: see --version output)

database (DEPRECATED, will be removed in a future release)

The url from which database is read. There can only be one of these lines. If there are multiple database lines then the first is used.

database_out (type: URL, default: see --version output)

The url to which the new database is written to. There can only be one of these lines. If there are multiple database_out lines then the first is used.

database_new (type: URL, default: <none>)

The url from which the other database for --compare is read.

database_attrs (type: attribute expression, default: H)

The attributes of the (uncompressed) database files which are to be added to the reports in report level >= database_attributes . Only checksum attributes are supported. To disable set database_attrs to 'E'.

database_add_metadata (type: bool, default: true)

Whether to add the AIDE version and the time of database generation as comments to the database file or not. This option may be set to false by default in a future release.

log_level (type: log level, default: warning)

The log level to use. Log messages are written to stderr. If there are multiple log_level lines then the first one is used. The --log-level or -L command line option overwrites this option.

verbose (type: number, range: 0 - 255, default: 5)

Removed in AIDE v0.17, use log_level and report_level options instead

gzip_dbout (type: bool, default: false)

Whether the output to the database is gzipped or not. This option is available only if zlib support is compiled in.

root_prefix (type: path, default: <empty>)

The prefix to strip from each file name in the file system before applying the rules and writing to database. AIDE removes a trailing slash from the prefix. If there are multiple root_prefix lines then the first one is used. This option has no effect in compare mode.

acl_no_symlink_follow (type: bool, default: false)

Whether to check ACLs for symlinks or not. This option is available only if acl support is compiled in.

warn_dead_symlinks (type: path, default: false)

Whether to warn about dead symlinks or not.

config_version (type: string, default: <empty>)

The value of config_version is printed in the report and also printed to the database. This is for informational purposes only. It has no other functionality.

Group definitions

If the parameter is not one of the previous parameters then it is regarded as a group definition. Value is then regarded as an attribute expression.

See DEFAULT GROUPS for an explanation of default predefined groups.

Group names are limited to alphanumeric characters (A-Za-z0-9).

REPORT OPTIONS

report_url (type: URL, default: stdout)

The URL that the output is written to.

Multiple instances of the report_url option are supported.

report_url=file:/var/log/aide.log

report_url=stdout

report_url=syslog:<LOG_FACILITY>

The following report options are available (to take effect they have to be set before report_url):

report_level (type: report level, default: changed_attributes)

The report level to use. The available report levels are as follows:

report_base16 (type: bool, default: false)

Base16 encode the checksums in the report. The default is to report checksums in base64 encoding.

report_detailed_init (type: bool, default: false)

Report added files (report level >= list_entries) and their details (report level >= added_removed_entries) in initialization mode.

report_quiet (type: bool, default: false)

Suppress report output if no differences to the database have been found.

report_append (type: bool, default: false)

Append to the report URL.

report_grouped (type: bool, default: true)

grouped (DEPRECATED, will be removed in a future release)

Group the files in the report by added, removed and changed files.

report_summarize_changes (type: bool, default: true)

summarize_changes (DEPRECATED, will be removed in a future release)

Summarize changes in the added, removed and changed files sections of the report.

The general format is like the string YlZbpugamcinHAXSEC, where Y is replaced by the file-type (f for a regular file, d for a directory, l for a symbolic link, c for a character device, b for a block device, p for a FIFO, s for a unix socket, D for a Solaris door, P for a Solaris event port, ! if file type has changed and ? otherwise).

The Z is replaced as follows: A = means that the size has not changed, a < reports a shrinked size and a > reports a grown size.

The other letters in the string are the actual letters that will be output if the associated attribute for the item has been changed or a "." for no change, a "+" if the attribute has been added, a "-" if it has been removed, a ":" if the attribute is ignored (but not forced) or a " " if the attribute has not been checked. The exceptions to this are: (1) a newly created file replaces each letter with a "+", and (2) a removed file replaces each letter with a "-".

The attribute that is associated with each letter is as follows:

report_ignore_added_attrs (type: attribute expression, default: empty)

Attributes whose addition is to be ignored in the report.

report_ignore_removed_attrs (type: attribute expression, default: empty)

Attributes whose removal is to be ignored in the report.

report_ignore_changed_attrs (type: attribute expression, default: empty)

ignore_list (removed in AIDE v0.17)

Attributes whose change is to be ignored in the report.

report_force_attrs (type: attribute expression, default: empty)

report_attributes (removed in AIDE v0.17)

Attributes which are always printed in the report for changed files. If an attribute is both ignored and forced the attribute is not considered for file change but printed in the final report as long as the file has been otherwise changed.

report_ignore_e2fsattrs (type: string, default: 0)

List (no delimiter) of ext2 file attributes which are to be ignored in the report. See chattr(1) for the available attributes. Use 0 (zero) to not ignore any attribute. Ignored attributes are represented by a ':' in the output.

report_ignore_e2fsattrs=EhI

RULES

Regular rule:

<regex> <attribute expression>

Negative rule:

!<regex>

Equals rule:

=<regex> <attribute expression>

Every regular expression has to start with a "/". An implicit ^ is added in front of each regular expression. In other words the regular expressions are matched at the first position against the complete filename (i.e. including the path). Special characters in your filenames can be escaped using two-digit URL encoding (for example, %20 to represent a space).

See EXAMPLES and doc/aide.conf for examples.

More in-depth discussion of the selection algorithm can be found in the AIDE manual.

RESTRICTED RULES

The file types are separated by comma. The syntax of restricted rules is as follows:

Restricted regular rule:

<regex> <file types> <attribute expression>

Restricted negative rule:

!<regex> <file types>

Restricted equals rule:

=<regex> <file types> <attribute expression>

Examples

/ d,f R

!/run d
/run R

/run d R-m-c-i
/run R

MACRO LINES

@@define VAR val

Define variable VAR to value val.

@@undef VAR

Undefine variable VAR.

@@ifdef VAR, @@ifndef VAR

@@ifdef begins an if statement. It must be terminated with an @@endif statement. The lines between @@ifdef and @@endif are used if variable VAR is defined. If there is an @@else statement then the part between @@ifdef and @@else is used is VAR is defined otherwise the part between @@else and @@endif is used. @@ifndef reverses the logic of @@ifdef statement but otherwise works similarly.

@@ifhost hostname, @@ifnhost hostname

@@ifhost works like @@ifdef only difference is that it checks whether hostname equals the name of the host that AIDE is running on. hostname is the name of the host without the domainname (hostname, not hostname.example.com).

@@{VAR}

@@{VAR} is replaced with the value of the variable VAR. If variable VAR is not defined an empty string is used.

Variables are supported in strings and in regular expressions of selection lines.

@@else

Begins the else part of an if statement.

@@endif

Ends an if statement.

@@include FILE

Include FILE.

The content of the file is used as if it were inserted in this part of the config file.

The maximum depth of nested includes is 16.

@@include DIRECTORY REGEX

Include all (regular) files found in DIRECTORY matching regular expression REGEX (sub-directories are ignored). The file are included in lexical sort order.

The content of the files is used as if it were inserted in this part of the config file.

@@x_include FILE

@@x_include DIRECTORY REGEX

@x_include is identical to @@include, except that if a config file is executable is is run and the output is used as config.

If the executable file exits with status greater than zero or writes to stderr aide stops with an error.

For security reasons DIRECTORY and each executable config file must be owned by the current user and must not be group- or world-writable.

@@x_include_setenv VAR VALUE

Adds the variable VAR with the value VALUE to the environment used for config file execution.

Environment variable names are limited to alphanumeric characters (A-Za-z0-9) and the underscore '_' and must not begin with a digit.

TYPES

attribute expression

URLS

DEFAULT GROUPS

Use 'aide --version' to show which compiled in groups are available.

Special groups

Hashsums groups

Use 'aide --version' to show which compiled hashsums are available.

Compound groups

Please run 'aide --version' to list the default compound groups.

EXAMPLES

/ R

This adds all files on your machine to the database. This one line is a fully qualified configuration file.

!/dev$

This ignores the /dev directory structure.

=/foo R

Only /foo and /foobar are taken into the database. None of their children are added.

=/foo/ R

Only /foo and its children (e.g. /foo/file and /foo/directory) are taken into the database. The children of sub-directories (e.g. /foo/directory/bar) are not added.

All=ftype+p+l+u+g+s+m+c+a+i+b+n+H+X

This line defines group All. It has all attributes, all compiled in hashsums (H) and all compiled in extra file attributes (X). See '--version' output for the compiled in hashsums and extra groups.

HINTS

/foo epug

/foo e+p+u+g

SEE ALSO

DISCLAIMER