# (c) 2000-2006 IC&S, The Netherlands
 #
 # Configuration file for DBMAIL
 [DBMAIL]
 #
 # Database settings
 #
 # database connection URI
 dburi                = sqlite:///var/tmp/dbmail.db
 #
 # Supported drivers are sql, ldap.
 #
 authdriver           =
 #
 #
 # following fields are now DEPRECATED!
 #driver               =
 #host                 =
 #sqlport              =
 #sqlsocket            =
 #user                 =
 #pass                 =
 #db                   =
 #
 # Number of database connections per threaded daemon
 # This also determines the size of the worker threadpool
 #
 # Do NOT increase this without proper consideration. A
 # very large database/worker pool will not only increase
 # the connection pressure on the database, but will more
 # significantly cause unnecessary context-switching in
 # your CPUs.
 #
 #max_db_connections   = 10
 #
 # Table prefix. Defaults to "dbmail_" if not specified.
 #
 table_prefix         = dbmail_
 #
 # encoding must match the database/table encoding.
 # i.e. latin1, utf8
 encoding             = utf8
 #
 # messages with unknown encoding will be assumed to have
 # default_msg_encoding
 # i.e. iso8859-1, utf8
 default_msg_encoding = utf8
 #
 # Postmaster's email address for use in bounce messages.
 #
 #postmaster           = DBMAIL-MAILER
 #
 # Sendmail executable for forwards, replies, notifies, vacations.
 # You may use pipes (|) in this command, for example:
 # dos2unix|/usr/sbin/sendmail  works well with Qmail.
 # You may use quotes (") for executables with unusual names.
 #
 sendmail              = /usr/sbin/sendmail
 #
 #
 # The following items can be overridden in the service-specific sections.
 #
 #
 #
 # Logging via stderr/log file and syslog
 #
 # Logging is broken up into 8 logging levels and each level can be indivually turned on or off.
 # The Stderr/log file logs all entries to stderr or the log file.
 # Syslog logging uses the facility mail and the logging level of the event for logging.
 # Syslog can then be configured to log data according to the levels.
 #
 # Set the log level to the sum of the values next to the levels you want to record.
 #   1 = Emergency
 #   2 = Alert
 #   4 = Critical
 #   8 = Error
 #  16 = Warning
 #  32 = Notice
 #  64 = Info
 # 128 = Debug
 # 256 = Database -> Logs at debug level
 #
 # Examples:   0 = Nothing
 #            31 = Emergency + Alert + Critical + Error + Warning
 #           511 = Everything
 #
 file_logging_levels       = 7
 #
 syslog_logging_levels     = 31
 #
 # Generate a log entry for database queries for the log level at number of seconds of query execution time.
 #
 query_time_info       = 10
 query_time_notice     = 20
 query_time_warning    = 30
 #
 # Throw an exception is the query takes longer than query_timeout seconds
 query_timeout         = 300
 #
 # Root privs are used to open a port, then privs
 # are dropped down to the user/group specified here.
 #
 effective_user        = nobody
 effective_group       = nogroup
 #
 # The IPv4 and/or IPv6 addresses the services will bind to.
 # Use * for all local interfaces.
 # Use 127.0.0.1 for localhost only.
 # Separate multiple entries with spaces ( ) or commas (,).
 #
 bindip                = 0.0.0.0		# IPv4 only - all IP's
 #bindip                = ::		# IPv4 and IPv6 - all IP's (linux)
 #bindip                = ::		# IPv6 only - all IP's (BSD)
 #bindip                = 0.0.0.0,::	# IPv4 and IPv6 - all IP's (BSD)
 #
 # The maximum length of the queue of pending connections. See
 # listen(2) for more information
 #
 # backlog              = 128
 #
 # Idle time allowed before a connection is shut off.
 #
 timeout               = 300
 #
 # Idle time allowed before a connection is shut off if you have not logged in yet.
 #
 login_timeout         = 60
 #
 # If yes, resolves IP addresses to DNS names when logging.
 #
 resolve_ip            = no
 #
 # If yes, keep statistics in the authlog table for connecting users
 #
 authlog               = no
 #
 # logfile for stdout messages
 #
 logfile               = /var/log/dbmail.log
 #
 # logfile for stderr messages
 #
 errorlog              = /var/log/dbmail.err
 #
 # directory for storing PID files
 #
 pid_directory         = /var/run
 #
 # directory for locating libraries (normally has a sane default compiled-in)
 #
 #library_directory       = /usr/lib/dbmail
 #
 # SSL/TLS certificates
 #
 # A file containing a list of CAs in PEM format
 tls_cafile            =
 # A file containing a PEM format certificate
 tls_cert              =
 # A file containing a PEM format RSA or DSA key
 tls_key               =
 # A cipher list string in the format given in ciphers(1)
 tls_ciphers           =
 # hashing algorithm. You can select your favorite hash type
 # for generating unique ids for message parts.
 #
 # for valid values check mhash(3) but minus the MHASH_ prefix.
 #
 # if you ever change this value run 'dbmail-util --rehash' to
 # update the hash for all mimeparts.
 #
 # examples: MD5, SHA1, SHA256, SHA512, TIGER, WHIRLPOOL
 #
 # hash_algorithm = SHA1
 # header_cache tuning
 #
 # set header_cache_readonly to 'yes' to prevent new
 # unknown header-names from being cached.
 #
 # header_cache_readonly = yes
 [LMTP]
 port                  = 24
 #tls_port              =
 [POP]
 port                  = 110
 #tls_port              = 995
 # You can set an alternate banner to display when connecting to the service
 # banner = DBMAIL pop3 server ready to rock
 # If TLS is enabled, login before starttls is normally
 # allowed. Use login_disabled=yes to change this
 #
 # login_disabled        = no
 #
 # If yes, allows SMTP access from the host IP connecting by POP3.
 # This requires addition configuration of your MTA
 #
 pop_before_smtp       = no
 [HTTP]
 port                  = 41380
 #
 # the httpd daemon provides full access to all users, mailboxes
 # and messages. Be very careful with this one!
 bindip                = 127.0.0.1
 admin                 = admin:secret
 [IMAP]
 # IMAP State Reload Strategy. Internally DBMail is loading various information about the selected folders (flags, message ids, etc)
 # 1 = full reload (default)
 # 2 = diff reload (experimental)
 #    In some setups it might be beneficial to use it, due to the fact that reloading is done in diferential mode,
 #    which may result in lower DB usage
 # mailbox_update_strategy = 1
 # IMAP Search strategy.
 # 1 = full sql search (default). All searches performed on the current folder are made via sql queries.
 # 2 = optimized search, use partialy sql search  (experimental). Some searches will be made via loaded state of the current folder.
 #    In some setups it might be beneficial to use it, due to lower DB usage.
 # mailbox_search_strategy = 1
 # Only for IMAP Reload Strategy (mailbox_search_strategy = 2)
 # Might be beneficial to do a full reload after n iterations. Sometimes might be beneficial to reload the full state reload.
 # -1 = no expiration
 #  x = number of iterations. If no mails are received (IDLE Server) those iterations can be transform in seconds
 #    mailbox_update_strategy_2_max_iterations * idle_timeout * idle_interval = s
 #
 # mailbox_update_strategy_2_max_iterations = 64
 # Allow reporting UNSEEN in SELECT command.
 # Althow RFC 3501 does state it that is mandatory, missing it means that the client need to issue a search for the unseen messages
 # 1 = allow UNSEEN in SELECT Command (default)
 # 0 = Do not Allow UNSEEN in SELECT Command
 # command_select_allow_unseen = 1
 # Mailbox Sequence update strategy.
 # 1 = normal behaviour, transactional safe
 # 2 = non transaction, still safe, might be better in clustered environments
 # mailbox_update_seq_strategy = 1
 # Mailbox \DELETE and message status synchronization.
 # In some instances messages marked as deleted are not having the status as deleted
 # 1 = normal do not sync
 # 2 = sync
 # mailbox_sync_deleted = 1
 # If mailbox_sync_deleted=2, size of the batch.
 # Due to the fact that this flag is making corection live, protection should be put in place
 # mailbox_sync_batch_size = 64
 # You can set an alternate banner to display when connecting to the service
 # banner = imap 4r1 server (dbmail 3.2.x)
 #
 # Port to bind to.
 #
 port                  = 143
 #tls_port              = 993
 #
 # IMAP prefers a longer timeout than other services.
 #
 timeout               = 4000
 #
 # If yes, allows SMTP access from the host IP connecting by IMAP.
 # This requires addition configuration of your MTA
 #
 imap_before_smtp      = no
 #
 # during IDLE, how many seconds between checking the mailbox
 # status (default: 30)
 #
 # idle_timeout          = 30
 # during IDLE, how often should the server send an '* OK' still
 # here message (default: 10)
 #
 # the time between such a message is idle_timeout * idle_interval
 # seconds
 #
 # idle_interval         = 10
 #
 # If TLS is enabled, login before starttls is normally
 # not allowed. Use login_disabled=no to change this
 #
 # login_disabled        = yes
 #
 # Provide a CAPABILITY to override the default
 #
 # capability 		= IMAP4 IMAP4rev1 AUTH=LOGIN ACL RIGHTS=texk NAMESPACE CHILDREN SORT QUOTA THREAD=ORDEREDSUBJECT UNSELECT IDLE
 # max message size. You can specify the maximum message size
 # accepted by the IMAP daemon during APPEND commands.
 #
 # Supported formats:
 #  decimal: 1000000
 #  octal:   03777777
 #  hex:     0xfffff
 #
 # max_message_size      =
 [SIEVE]
 #
 # Port to bind to.
 #
 port                  = 2000
 tls_port              =
 [LDAP]
 port                  = 389
 version               = 3
 hostname              = ldap
 base_dn               = ou=People,dc=mydomain,dc=com
 #
 # If your LDAP library supports ldap_initialize(), then you can use the
 # alternative LDAP server DSN like following.
 #
 # URI                = ldap://127.0.0.1:389
 # URI                = ldapi://%2fvar%2frun%2fopenldap%2fldapi/
 #
 # Leave blank for anonymous bind.
 # example: cn=admin,dc=mydomain,dc=com
 #
 bind_dn               =
 #
 # Leave blank for anonymous bind.
 #
 bind_pw               =
 scope                 = SubTree
 # AD users may want to set this to 'no' to disable
 # ldap referrals if you are seeing 'Operations errors'
 # in your logs
 #
 referrals             = yes
 user_objectclass      = top,account,dbmailUser
 forw_objectclass      = top,account,dbmailForwardingAddress
 cn_string             = uid
 field_passwd          = userPassword
 field_uid             = uid
 field_nid             = uidNumber
 min_nid               = 10000
 max_nid               = 15000
 field_cid             = gidNumber
 min_cid               = 10000
 max_cid               = 15000
 # a comma-separated list of attributes to match when searching
 # for users or forwards that match a delivery address. A match
 # on any of them is a hit.
 field_mail            = mail
 # field that holds the mail-quota size for a user.
 field_quota           = mailQuota
 # field that holds the forwarding address.
 field_fwdtarget       = mailForwardingAddress
 # override the query string used to search for users
 # or forwards with a delivery address.
 # query_string          = (mail=%s)
 [DELIVERY]
 #
 # Run Sieve scripts as messages are delivered.
 #
 SIEVE                 = yes
 #
 # Use 'user+mailbox@domain' format to deliver to a mailbox.
 #
 SUBADDRESS            = yes
 #
 # Turn on/off the Sieve Vacation extension.
 #
 SIEVE_VACATION        = yes
 #
 # Turn on/off the Sieve Notify extension
 #
 SIEVE_NOTIFY          = yes
 #
 # Turn on/off additional Sieve debugging.
 #
 SIEVE_DEBUG           = no
 # Use the auto_notify table to send email notifications.
 #
 AUTO_NOTIFY           = no
 #
 # Use the auto_reply table to send away messages.
 #
 AUTO_REPLY            = no
 #
 # Defaults to "NEW MAIL NOTIFICATION"
 #
 #AUTO_NOTIFY_SUBJECT        =
 #
 # Defaults to POSTMASTER from the DBMAIL section.
 #
 #AUTO_NOTIFY_SENDER        =
 # If you set this to 'yes' dbmail will check for duplicate
 # messages in the relevant mailbox during delivery using
 # the Message-ID header
 #
 suppress_duplicates	= no
 #
 # Soft or hard bounce on over-quota delivery
 #
 quota_failure           = hard
 # end of configuration file

Eelco van Beek      Aaron Stone            Paul J Stevens
Roel Rozendaal      Open Source Engineer   NFG Net Facilities Group BV
Ilja Booij          Palo Alto, CA USA      http://www.nfg.nl
IC&S                http://hydricacid.com
http://www.ic-s.nl

Author.

http://dbmail.org/mantis/