NAME

SYNOPSIS

DESCRIPTION

The access argument, if present, indicates the way in which the file (or command pipeline) is to be accessed. In the first form access may have any of the following values:

r

Open the file for reading only; the file must already exist. This is the default value if access is not specified.

r+

Open the file for both reading and writing; the file must already exist.

w

Open the file for writing only. Truncate it if it exists. If it does not exist, create a new file.

w+

Open the file for reading and writing. Truncate it if it exists. If it does not exist, create a new file.

a

Open the file for writing only. If the file does not exist, create a new empty file. Set the file pointer to the end of the file prior to each write.

a+

Open the file for reading and writing. If the file does not exist, create a new empty file. Set the initial access position to the end of the file.

All of the legal access values above may have the character b added as the second or third character in the value to indicate that the opened channel should be configured with the -translation binary option, making the channel suitable for reading or writing of binary data.

In the second form, access consists of a list of any of the following flags, all of which have the standard POSIX meanings. One of the flags must be either RDONLY, WRONLY or RDWR.

RDONLY

Open the file for reading only.

WRONLY

Open the file for writing only.

RDWR

Open the file for both reading and writing.

APPEND

Set the file pointer to the end of the file prior to each write.

BINARY

Configure the opened channel with the -translation binary option.

CREAT

Create the file if it does not already exist (without this flag it is an error for the file not to exist).

EXCL

If CREAT is also specified, an error is returned if the file already exists.

NOCTTY

If the file is a terminal device, this flag prevents the file from becoming the controlling terminal of the process.

NONBLOCK

Prevents the process from blocking while opening the file, and possibly in subsequent I/O operations. The exact behavior of this flag is system- and device-dependent; its use is discouraged (it is better to use the fconfigure command to put a file in nonblocking mode). For details refer to your system documentation on the open system call's O_NONBLOCK flag.

TRUNC

If the file exists it is truncated to zero length.

If a new file is created as part of opening it, permissions (an integer) is used to set the permissions for the new file in conjunction with the process's file mode creation mask. Permissions defaults to 0666.

COMMAND PIPELINES

If the command (or one of the commands) executed in the command pipeline returns an error (according to the definition in exec), a Tcl error is generated when close is called on the channel unless the pipeline is in non-blocking mode then no exit status is returned (a silent close with -blocking 0).

It is often useful to use the fileevent command with pipelines so other processing may happen at the same time as running the command in the background.

SERIAL COMMUNICATIONS

The fconfigure command can be used to query and set additional configuration options specific to serial ports (where supported):

-mode baud,parity,data,stop

This option is a set of 4 comma-separated values: the baud rate, parity, number of data bits, and number of stop bits for this serial port. The baud rate is a simple integer that specifies the connection speed. Parity is one of the following letters: n, o, e, m, s; respectively signifying the parity options of “none”, “odd”, “even”, “mark”, or “space”. Data is the number of data bits and should be an integer from 5 to 8, while stop is the number of stop bits and should be the integer 1 or 2.

-handshake type

(Windows and Unix). This option is used to setup automatic handshake control. Note that not all handshake types maybe supported by your operating system. The type parameter is case-independent.

-queue

(Windows and Unix). The -queue option can only be queried. It returns a list of two integers representing the current number of bytes in the input and output queue respectively.

-timeout msec

(Windows and Unix). This option is used to set the timeout for blocking read operations. It specifies the maximum interval between the reception of two bytes in milliseconds. For Unix systems the granularity is 100 milliseconds. The -timeout option does not affect write operations or nonblocking reads. This option cannot be queried.

-ttycontrol {signal boolean signal boolean ...}

(Windows and Unix). This option is used to setup the handshake output lines (see below) permanently or to send a BREAK over the serial line. The signal names are case-independent. {RTS 1 DTR 0} sets the RTS output to high and the DTR output to low. The BREAK condition (see below) is enabled and disabled with {BREAK 1} and {BREAK 0} respectively. It is not a good idea to change the RTS (or DTR) signal with active hardware handshake rtscts (or dtrdsr). The result is unpredictable. The -ttycontrol option cannot be queried.

-ttystatus

(Windows and Unix). The -ttystatus option can only be queried. It returns the current modem status and handshake input signals (see below). The result is a list of signal,value pairs with a fixed order, e.g. {CTS 1 DSR 0 RING 1 DCD 0}. The signal names are returned upper case.

-xchar {xonChar xoffChar}

(Windows and Unix). This option is used to query or change the software handshake characters. Normally the operating system default should be DC1 (0x11) and DC3 (0x13) representing the ASCII standard XON and XOFF characters.

-pollinterval msec

(Windows only). This option is used to set the maximum time between polling for fileevents. This affects the time interval between checking for events throughout the Tcl interpreter (the smallest value always wins). Use this option only if you want to poll the serial port more or less often than 10 msec (the default).

-sysbuffer inSize

-sysbuffer {inSize outSize}

(Windows only). This option is used to change the size of Windows system buffers for a serial channel. Especially at higher communication rates the default input buffer size of 4096 bytes can overrun for latent systems. The first form specifies the input buffer size, in the second form both input and output buffers are defined.

-lasterror

(Windows only). This option is query only. In case of a serial communication error, read or puts returns a general Tcl file I/O error. fconfigure -lasterror can be called to get a list of error details. See below for an explanation of the various error codes.

SERIAL PORT SIGNALS

TXD(output)

Transmitted Data: Outgoing serial data.

RXD(input)

Received Data:Incoming serial data.

RTS(output)

Request To Send: This hardware handshake line informs the modem that your workstation is ready to receive data. Your workstation may automatically reset this signal to indicate that the input buffer is full.

CTS(input)

Clear To Send: The complement to RTS. Indicates that the modem is ready to receive data.

DTR(output)

Data Terminal Ready: This signal tells the modem that the workstation is ready to establish a link. DTR is often enabled automatically whenever a serial port is opened.

DSR(input)

Data Set Ready: The complement to DTR. Tells the workstation that the modem is ready to establish a link.

DCD(input)

Data Carrier Detect: This line becomes active when a modem detects a “Carrier” signal.

RI(input)

Ring Indicator: Goes active when the modem detects an incoming call.

BREAK

A BREAK condition is not a hardware signal line, but a logical zero on the TXD or RXD lines for a long period of time, usually 250 to 500 milliseconds. Normally a receive or transmit data signal stays at the mark (on=1) voltage until the next character is transferred. A BREAK is sometimes used to reset the communications line or change the operating mode of communications hardware.

ERROR CODES (Windows only)

RXOVER

Windows input buffer overrun. The data comes faster than your scripts reads it or your system is overloaded. Use fconfigure -sysbuffer to avoid a temporary bottleneck and/or make your script faster.

TXFULL

Windows output buffer overrun. Complement to RXOVER. This error should practically not happen, because Tcl cares about the output buffer status.

OVERRUN

UART buffer overrun (hardware) with data lost. The data comes faster than the system driver receives it. Check your advanced serial port settings to enable the FIFO (16550) buffer and/or setup a lower(1) interrupt threshold value.

RXPARITY

A parity error has been detected by your UART. Wrong parity settings with fconfigure -mode or a noisy data line (RXD) may cause this error.

FRAME

A stop-bit error has been detected by your UART. Wrong mode settings with fconfigure -mode or a noisy data line (RXD) may cause this error.

BREAK

A BREAK condition has been detected by your UART (see above).

PORTABILITY ISSUES

Windows (all versions)

Valid values for fileName to open a serial port are of the form comX:, where X is a number, generally from 1 to 4. This notation only works for serial ports from 1 to 9, if the system happens to have more than four. An attempt to open a serial port that does not exist or has a number greater than 9 will fail. An alternate form of opening serial ports is to use the filename \\.\comX, where X is any number that corresponds to a serial port; please note that this method is considerably slower on Windows 95 and Windows 98.

Windows NT

When running Tcl interactively, there may be some strange interactions between the real console, if one is present, and a command pipeline that uses standard input or output. If a command pipeline is opened for reading, some of the lines entered at the console will be sent to the command pipeline and some will be sent to the Tcl evaluator. If a command pipeline is opened for writing, keystrokes entered into the console are not visible until the pipe is closed. This behavior occurs whether the command pipeline is executing 16-bit or 32-bit applications. These problems only occur because both Tcl and the child application are competing for the console at the same time. If the command pipeline is started from a script, so that Tcl is not accessing the console, or if the command pipeline does not use standard input or output, but is redirected from or to a file, then the above problems do not occur.

Windows 95

A command pipeline that executes a 16-bit DOS application cannot be opened for both reading and writing, since 16-bit DOS applications that receive standard input from a pipe and send standard output to a pipe run synchronously. Command pipelines that do not execute 16-bit DOS applications run asynchronously and can be opened for both reading and writing.

Unix       

Valid values for fileName to open a serial port are generally of the form /dev/ttyX, where X is a or b, but the name of any pseudo-file that maps to a serial port may be used. Advanced configuration options are only supported for serial ports when Tcl is built to use the POSIX serial interface.

See the PORTABILITY ISSUES section of the exec command for additional information not specific to command pipelines about executing applications on the various platforms

EXAMPLE

set fl [open "| ls this_file_does_not_exist"]
set data [read $fl]
if {[catch {close $fl} err]} {
    puts "ls command failed: $err"
}

SEE ALSO

KEYWORDS