NAME

comb - Create and manipulate BRL-CAD combination with the name combination_name.

SYNOPSIS

comb [[-c] | [-r]] [[-w] | [-f] | [-l]] [[-S]] {combination_name} [<operator object_name>...]

DESCRIPTION

The comb command creates and manipulates BRL-CAD combination objects. For combination creation or appending, operator/object_name pairs of boolean operators and object names are parsed into comb tree entries. (TODO - integrate full expression evaluation like that in c.)

The following options are recognized:

-c

Ensures that the combination does not have the region flag set. Conflicts with -r.

-r

Ensures that the combination does have the region flag set. Conflicts with -c.

-w

Moves the contents of a combination to a new combination and makes that combination the sole child of the original combination. See the "fixing nested regions" example below for an illustration of how this option is used. Conflicts with -f and -l.

-f

Flattens a combination that contains only unions into a single top level combination with all of the solids unioned into it, and remove all combinations that were below the input combination that are not used elsewhere in the .g file. (In essence, the latter behavior prevents "orphaned" combinations that are no longer used from showing up as new top level objects in the database.) This feature will not work on any combination containing non-union boolean operations. The following search command can be used to find combs that are candidates for flattening:

		    
mged> search -type comb ! -below ( -bool + -or -bool - )

Conflicts with -w and -l.

-l

"Lift" a region flag to the top comb, and clear all region flags below the comb in the tree. Like the f option this option will work to respect the integrity of other geometry in the database, but it is more aggressive in the steps it will take and it will operate on trees that contain non-union booleans. The decision logic is as follows:

1.Check if regions below the current comb are used elsewhere in the .g file. If they are not, they will simply be converted to combs.

2.For regions that are used elsewhere in the .g file, determine if their parent comb (if that comb is not the original comb supplied to the command) is also used elsewhere in the .g file. If not, the w wrapping behavior is used to produce a non-region equivalent comb, and the parent comb is updated to use that new comb instead of the region. If one or more parent combs are used elsewhere (i.e. the parent comb cannot be altered without altering other geometry) the command will fail - manual intervention is required to resolve the situation.

Conflicts with -w and -f.

-S

Stop if the combination object already exists.

EXAMPLES

This example shows how to use the comb command to create a combination according to a given formula.

Example 1. Creating a combination.

mged> comb abc u a u b - a + d

Creates a combination named abc.

Example 2. Fixing a nested region.

Nested regions (a region containing another region in its tree) are generally viewed as poor modelling practice. This example shows how to fix an instance of this nesting with minimal disruption to the model.

Suppose we have a situation where region2.r is unioned into region1.r, and both region1.r and region2.r have the region flag set, as seen in the tree below.

      
mged> tree region1.r
region1.r/R
        u region2.r/R
                u sph.s
        u comb.c/
                u arb.s

This geometry has an error in that one region is not supposed to be combined into another using boolean operations. Further, suppose that one or more assemblies use region2.r and expect it to be a region - i.e., region2.r needs to remain a region with the same contents. To fix this problem without disturbing other geometry using region2.r, first make a combination below region2.r using the w flag to comb:

      
mged> comb -w region2.r
mged> tree region2.r
region2.r/R
        u region2.r.c/
                  u sph.s

The next step is to adjust the region1.r tree definition to reference the non-region combination instead of region2.r:

      
mged> set glob_compat_mode 0
0
mged> get region1.r tree
u {l region2.r} {l comb.c}
mged> adjust region1.r tree {u {l region2.r.c} {l comb.c}}
mged> tree region1.r
region1.r/R
        u region2.r.c/
                u sph.s
        u comb.c/
                u arb.s

Because the tree is manipulated as a Tcl list, we need glob compatibility mode to be off on the MGED command line. Once the tree is re-defined, region1.r no longer has region2.r below it, but still defines the same physical volume via region2.r.c.

Optionally, the name region2.r.c can be changed to the name region2.c with the mvall command:

      
mged> mvall region2.r.c region2.c
mged> tree region1.r
region1.r/R
        u region2.c/
                u sph.s
        u comb.c/
                u arb.s
mged> tree region2.r
region2.r/R
        u region2.c/
                u sph.s

Example 3. Flattening a Combination.

When a combination contains only unioned objects, it can be flattened with the f option.

First, create an appropriate example to properly illustrate the option's behavior:

			  
mged> make sph1.s sph
mged> make sph2.s sph
mged> comb sph1.c u sph1.s
mged> comb sph2.c u sph2.s
mged> comb spheres.c u sph1.c u sph2.c
mged> comb misc.c u sph2.c
mged> tree spheres.c
spheres.c/
         u sph1.c/
                 u sph1.s
         u sph2.c/
                 u sph2.s
mged> tree misc.c
misc.c/
         u sph2.c/
                 u sph2.s
mged> tops
misc.c/               spheres.c

Note that sph2.c is used in both spheres.c and misc.c, but sph1.c is only used in spheres.c In the tops command output, misc.c and spheres.c are the only top level objects. Targeting spheres.c with the f option reworks the tree as follows:

      
mged> comb -f spheres.c
mged> tree spheres.c
spheres.c/
        u sph1.s
        u sph2.s
mged> tree misc.c
misc.c/
         u sph2.c/
                 u sph2.s
mged> tops
misc.c/               spheres.c

Notice that while spheres.c has indeed been flattened and no longer has the intermediate combinations over its solids, misc.c is still intact. Notice also that while sph2.c was preserved, since it is used by misc.c, sph1.c was removed and does not show up in the tops command's output since it was no longer used by any object in the database.

Example 4. Example Of Comb Region Lifting.

The l option is useful in cases where many w type operations are needed.

Suppose a geometry has the following structure:

			  
mged> make sph1.s sph
mged> make sph2.s sph
mged> r r1 u sph1.s
mged> r r2 u sph2.s
mged> comb assembly u r1 u r2
mged> r r3 u r1 - r2
mged> tops
assembly/           r3/R
mged> tree assembly
assembly/
        u r1/R
                u sph1.s
        u r2/R
                u sph2.s
mged> tree r3
r3/R
        u r1/R
                u sph1.s
        - r2/R
                u sph2.s

There are regions below region r3, which is not good modeling practice. The l option applied to r3 makes r3 a region that no longer has regions below it, while at the same time preserving the geometric volumes defined by all existing combs and preserving the meaning of the assembly region definitions:

      
mged> comb -l r3
mged> tree assembly
assembly/
        u r1/R
                u r1.c/
                         u sph1.s
        u r2/R
                u r1.c/
                         u sph1.s
mged> tree r3
r3/R
        u r1.c/
                u sph1.s
        - r2.c/
                u sph2.s

Example 5. Example Tree Structure That Will Prevent Successful Region Lifting.

While the l option can handle many tree configurations, there are some situations where manual intervention is required. This example illustrates one such case.

Suppose a geometry has the following structure:

			  
mged> make sph1.s sph
mged> make sph2.s sph
mged> make sph3.s sph
mged> r r1 u sph1.s
mged> r r2 u sph2.s
mged> comb subassembly u r1 u r2
mged> r r3 u sph3.s - subassembly
mged> comb assembly u subassembly
mged> tops
assembly/           r3/R
mged> tree assembly
assembly/
        u subassembly/
                u r1/R
                        u sph1.s
                u r2/R
                        u sph2.s
mged> tree r3
r3/R
        u sph3.s
        - subassembly/
                u r1/R
                        u sph1.s
                u r2/R
                        u sph2.s

This geometry has regions below region r3, which is not ideal. However, attempting to use the l option on r3 will produce the following error:

      
mged> comb -l r3
Comb region lift failed - the following combs in the tree contain
regions and are also used outside the tree of r3:
subassembly, containing region r1
subassembly, containing region r2
The above combs must be reworked before region lifting the tree
of r3 can succeed.

While r3 has problems, the geometry tree under assembly is entirely correct. For r3 to become a toplevel region with no regions under it, the definition of subassembly would have to change too. Because subassembly is used in the definition of assembly, as well as the definition of r3, changing subassembly's contents would destroy the meaning of the (valid) assembly comb. Hence, the command fails and does not change the geometry.

AUTHOR

BRL-CAD Team

BUG REPORTS

Reports of bugs or problems should be submitted via electronic mail to devs@brlcad.org