Installing Perl5 Modules Yourself
	The content on this page is adapted from Answers to Some Perl/CGI Questions, by Bekman Stas. NOTE: The Perl5 module that you wish to install may be included in our perlpac1 distribution or may be installable using the vcpan utility. Both of these methods are preferable to those detailed below. See the Perl5 module documentation for more details.   Installing Perl5 Modules yourself on your Virtual Private Servers can be a tricky exercise. Utilities for installing Perl5 modules generally assume that the installation is being done in the root area of the file system of the host machine. As a Virtual Private Servers user you do not have access to the root area of the host machine. So, you must install Perl5 modules locally, within your Virtual Private Servers file system.
	Installing Perl5 Modules Locally
	Normally, the Perl5 module installation procedure includes commands something like these: % perl5 Makefile.PL % make % make test % make install The first command, perl5 Makefile.PL, directs perl5 to create a makefile for the new module you are installing. When installing a perl5 module locally you must designate on the command line the home directory of your perl5 installation. That information is used by perl5 to create the makefile. Substitute the following command for perl5 Makefile.PL: % perl5 Makefile.PL PREFIX=/usr/home/<username>/usr/local The value <username> above should be replaced with the username of your Virtual Private Servers. So the complete installation process is: % perl5 Makefile.PL PREFIX=/usr/home/<username>/usr/local % make % make test % make install For older modules it may be necessary to designate several other variables on the command line during the module installation: % perl5 Makefile.PL PREFIX=/usr/home/<username>/usr/local INSTALLPRIVLIB=/usr/home/<username>/usr/local/lib/perl5 INSTALLSCRIPT=/usr/home/<username>/usr/local/bin INSTALLSITELIB=/usr/home/<username>/usr/local/lib/perl5/site_perl INSTALLBIN=/usr/home/<username>/usr/local/bin INSTALLMAN1DIR=/usr/home/<username>/usr/local/lib/perl5/man INSTALLMAN3DIR=/usr/home/<username>/usr/local/lib/perl5/man/man3 To save yourself some typing you can create a file and put these variable assignments above in the file (<filename>) something like this: PREFIX=/usr/home/<username>/usr/local INSTALLPRIVLIB=/usr/home/<username>/usr/local/lib/perl5 INSTALLSCRIPT=/usr/home/<username>/usr/local/bin INSTALLSITELIB=/usr/home/<username>/usr/local/lib/perl5/site_perl INSTALLBIN=/usr/home/<username>/usr/local/bin INSTALLMAN1DIR=/usr/home/<username>/usr/local/lib/perl5/man INSTALLMAN3DIR=/usr/home/<username>/usr/local/lib/perl5/man/man3 Then, each time you install a perl5 module you can use the following syntax: % perl5 Makefile.PL `cat <filename>` % make % make test % make install You also can have a few different local modules installation procedures, for example one for production perl and another for development: % perl5 Makefile.PL `cat <filename>.production` or % perl5 Makefile.PL `cat <filename>.development` Making scripts find the modules you have installed When you install perl5 on your Virtual Private Servers, all pre-installed modules are installed into these 4 directories (depending on which version of perl5 you are installing): /usr/local/lib/perl5 /usr/local/lib/perl5/i386-bsdos/5.00X /usr/local/lib/perl5/site_perl/i386-bsdos /usr/local/lib/perl5/site_perl These 4 directories are already preset in the perl5's @INC array. That array contains the paths that perl5 searches in order to find modules. If you install perl5 modules locally as described above, you will need to append these two directories, which are local to your Virtual Private Servers, to the @INC array: /usr/home/<username>/usr/local/lib/perl5 /usr/home/<username>/usr/local/lib/perl5/site_perl The architecture specific directories are being searched by perl automatically Each time you want to use modules in that path you should add the following line to your scripts: use lib qw(/usr/home/<username>/usr/local/lib/perl5 /usr/home/<username>/usr/local/lib/perl5/site_perl); You don't have to put it into a BEGIN block; the lib.pm module takes care of that for you. It also adds the architecture specific directories. You also can use a BEGIN block to include your installed modules: BEGIN { unshift @INC, qw(/usr/home/<username>/usr/local/lib/perl5 /usr/home/<username>/usr/local/lib/perl5/site_perl); } However, the use lib construct seems to be cleaner and the unshift @INC construct doesn't automatically add the architecture specific directories to the @INC array. Installing new modules that require locally installed modules Okay, imagine that you have installed module A in /usr/home/<username>/usr/local/lib/perl5. Now you want to install a module B that demands module A to be already installed. You know that you have installed the A module, but amazingly B can't locate it. Why? Because when you try to install the module B it doesn't know that you have module A installed locally. Perl5 searches the basic 4 directories as defined by default in the @INC array. But your local directories aren't listed there. The solution is simple. The PERL5LIB environment variable does the same job in the shell as use lib does in your script. So if you use csh/tcsh type the following at the command line: % setenv PERL5LIB /usr/home/<username>/usr/local/lib/perl5: /usr/home/<username>/usr/local/lib/perl5/site_perl Check the man page of your favorite shell how to set the environment variables if you use a shell different from csh/tcsh. Put this setenv statement into .login or another file that is being sourced each time you login into your account and you will not have to worry to remember setting it each time you login.
	Module installation using CPAN.pm
	An alternative to manually installing perl5 modules is the CPAN.pm module (see www.perl.com/CPAN/) which automates module download and installation. If you have perl5.004 or higher installed you have it bundled with the distribution. If not, you can download it from CPAN. When you initially run the % perl5 -MCPAN -e shell command, it will ask you a few questions. You can use all the defaults, except for this one Parameters for the 'perl Makefile.PL' command? [] PREFIX=/usr/home/<username>/usr/local and this one: Parameters for the 'make install' command? [] INSTALLMAN3DIR=/usr/home/<username>/usr/local/lib/perl5/man/man3 When it asks for your favorite CPAN site, try this: Please enter it here: ftp://ftp.cs.colorado.edu/pub/perl/CPAN/ After configuration of the module is complete, you will see a > prompt. Then you can try installing modules. To install the CGI module, do this: > install CGI It will fetch the latest CGI module, unpack it, make it, test it and install it into your local area or the directory you specified as the PREFIX directory. The command: > i /CGI/ will return the list of modules that match that pattern. The CPAN.pm module has more functionality, like checking for the latest modules, for example. Just run perldoc CPAN to read the man page.